• Journal of Korean Philosophical Society
• /
• v.145
• /
• pp.217-244
• /
• 2018

This paper reviews how $J{\ddot{u}}rgen$ Moltmann embraces and transforms the philosophy of Ernst Bloch. For what are the hopes of the two thinkers who presuppose opposing worldviews? This question will provide a good opportunity to look at how different religious types, based on different worldviews in modern philosophy of religion, can understand and communicate with one another. Ernst Bloch was a philosopher who originally interpreted Judeo-Christian thought through Marxism and Persian Dualism and helped to carry out the intrinsic criticism of the doctrine of Christian eschatology by developing atheism of Christianity into a philosophy of hope. Bloch and Moltmann deal with the concepts of future, humanity, nation, and hope in the eschatological horizon, but their worldviews are so different. For example, the connection between the Beginning and Ending, Disjunction or Continuation, the Core of Existence and Resurrection, Messianism and Marxism, Atheism and Theism, Persian Dualism and Judeo-Christian Monotheism. Therefore, a one-sided interpretation that ignores worldview differences in the hopes of these two thinkers should be avoided. Moltmann actively embraced the Messianism of the Jewish thinker, Bloch, by excluding Marxism, made the spectrum of broad-minded horizons diminished in the union of Messianism and Marxism. Moltmann replaced the utopian possibilities of matter in the Ontology of Not-Yet-Being, with the resurrection of Christ, who was crucified, and with the God of Creation and the God of Exodus. By overthrowing the position of atheism in Christianity, which was very important for Bloch, with the system of Trinitarian Monotheism, it resulted in the disconnection and conflict between the Old Testament and the New Testament, especially the ignorance of the tension between God the Lord and Jesus Christ.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.466-466
• /
• 2017

지하공간의 개발과 지하공간의 굴착으로 인한 지표수 및 지하수 시스템의 변화나 굴착면 주위의 지하수 유동 체계의 변화는 터널내로의 지하수 유입, 지표수 고갈을 가져온다. 또한 터널 상부의 지반에서 현지응력의 변화로 인한 지하수 유출은 지표침하, 하천수 및 계곡수 고갈을 발생시킬 수 있다. 그러나, 터널설계 시 비용 및 시간, 현장의 진입조건 등의 제약으로 상세한 지반조사의 실시가 이루어지지 않을 때가 있다. 또한, 터널 공사가 진행되는 중에는 공사기간과 공사비 때문에 별도의 지반조사를 하지 않는다. 그 대신에 터널 막장에서 실시하는 Face Mapping을 토대로 공사를 진행하며, 대규모 위험요소가 발견되지 않는 이상 별도의 비용과 시간을 투입하여 추가 지질 및 지반 조사를 실시하는 경우는 매우 드물다. 연구지역의 지질은 경상분지내 백악기 하양층군의 퇴적암류, 이를 관입/분출한 불국사화강암류 및 제3기 화산암류, 전기 에오세 연일층군에 대비되는 퇴적암류로 구성되어 있다. 이들을 피복하는 제4기 충적 퇴적층은 주로 단층곡과 동측 지괴의 선상지 및 하천을 따라 분포한다. 연구지역에는 폭 100 m 이상의 대규모 단층대가 발달하였으며 제4기 단층운동으로 인한 단층파쇄대가 존재한다. 퇴적암 분포지역에서는 반복층서가 관찰되며 소규모 단층, 단열, 변형띠 등이 연속적으로 발달해 있다. 본 연구에서는 터널공사에 의한 지하수 변화를 확인하기 위하여 현장추적자 시험과 수질분석 및 지하수 모델링을 실시하였다. 현장 수질 분석에 의한 지표수와 지하수 간의 수질의 차이를 보면, 알칼리도를 제외한 대부분의 수질 항목이 서로 유사성을 보인다. 전기전도도(EC), TDS, 알칼리도의 경우 지표수의 수원지에서 터널 내부로 유입이 일어나고 있다. 이는 터널 공사의 영향으로 판단되며, 현장에서 실시한 추적자 시험에서는 추적자의 이동 시간이 매우 빨라 지표 수원지로부터 지표수가 터널내부로 빠른 속도(10시간 이내)로 유입된다고 판단된다. 지하수 모델링 결과, 정상류 상태에서는 지하수가 북동쪽의 높은 고도에서 서남쪽의 낮은 고도로 흐르는 것으로 확인되며, 가뭄시에도 지하수 함양으로 지하수가 고갈되지는 않는 것으로 나타났다. 부정류 상태 모델링 결과, 일일 평균 $32.49m^3$의 지하수가 터널 내부로 유입되는 것으로 산정되었다. 이 양은 터널 내부뿐만 아니라 터널 공사 현장 주위로도 지하수 유출이 일어나고 있음을 지시한다.

• Geophysics and Geophysical Exploration
• /
• v.15 no.3
• /
• pp.129-135
• /
• 2012

The simultaneous-source full waveform inversion improves the applicability of full waveform inversion by reducing the computational cost. Since this technique adopts simultaneous multi-source for forward modeling, unwanted events remain in the residual seismograms when the receiver geometry of field acquisition is different from that of numerical modeling. As a result, these events impede the convergence of the full waveform inversion. In particular, the streamer-type data with limited offsets is the most difficult data to apply the simultaneous-source technique. To overcome this problem, the global-correlation-based objective function was suggested and it was successfully applied to the simultaneous-source full waveform inversion in time domain. However, this method distorts residual wavefields due to the modified objective function and has a negative influence on the inversion result. In addition, this method has not been applied to the frequency-domain simultaneous-source full waveform inversion. In this paper, we apply a timedamping function to the observed and modeled data, which are used to compute global correlation, to minimize the distortion of residual wavefields. Since the damped wavefields optimize the performance of the global correlation, it mitigates the distortion of the residual wavefields and improves the inversion result. Our algorithm incorporates the globalcorrelation-based full waveform inversion into the frequency domain by back-propagating the time-domain residual wavefields in the frequency domain. Through the numerical examples using the streamer-type data, we show that our inversion algorithm better describes the velocity structure than the conventional global correlation approach does.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.67-75
• /
• 2019

The diaphragm used for CFT columns has a small amount of steel to be used, but has a disadvantage that welding is difficult and openings are required because the steel tube and four sides must be welded. The improved diaphragm to be examined in this study was cut into four corners by cutting the center hole for concrete filling. In the improved diaphragm, the width of the center hole is the same as that of the previous diaphragm, but the width of the diaphragm contacting the steel tube is reduced, thereby reducing the welding length by about 70% compared to the previous diaphragm. The in-plane strain of each specimen was analyzed when the same load was applied to the interior diaphragm through a simple tensile test. Using the general FEM program(ANSYS 19.2), the analysis was performed under the same conditions as the actual simple tensile test, and the load transfer between the improved diaphragm and the previous diaphragm was compared. When the width of the diaphragm is equal to or smaller than the flange width, stress is concentrated from the end of the diaphragm, and when the flange width is larger, stress is concentrated at the center.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.417-424
• /
• 2019

Despite its superior ability to show distinct cellular morphology and for long-term storage, conventional tissue fixation by formalin has many drawback, including slower fixation, the exposure to harmful chemicals and extensive protein modification. Herein, we assessed the effects of rapid microwave-assisted tissue fixation on histological examination and on protein integrity by comparing these microwave irradiation fixated tissues with the formalin-fixed tissues. One of the paired mouse tissues (liver and kidney) was fixed in formalin and the other was fixed by using microwave irradiation in phosphate buffered saline. Each slide from the paraffin-embedded tissues was examined by H & E staining for the adequacy of fixation and by immunohistochemical staining for antigenicity in a blinded fashion. Evaluation of protein recovery and the protein quality from the fixed tissues were analyzed by the BCA method and Western blotting, respectively. The results from H & E staining and immunohistochemical staining showed that the sections obtained from microwave-fixed tissues under our experimental conditions were comparable to those of the formalin-fixed tissues except for the integrity of RBCs. Furthermore, proteins were effectively extracted from the microwave-fixed tissues with acceptable preservation of the proteins' quality. Taken together, this microwave-assisted tissue processing yields a quick fixation and better protein recovery in higher amounts, as well as the adequacy of fixation and the antigenicity being comparable to formalin-fixed tissues, and this all suggests that this new fixation technique can be applied in an environment where rapid tissue fixation is required.

• (The) Research of the performance art and culture
• /
• no.33
• /
• pp.97-128
• /
• 2016

According to the findings of the study, the music composition of the mask play is deeply related to the main characteristics of the scene. The first scene of the play starts with the Byeoksa dance. This particular dance part represents the evil spirit expel ritual. The instrumental accompaniment like and are played for the dance. The last part of the play starts with the Halmi and Yeonggam scene. This scene is played in both the instrumental and vocal music. For the instrumental part , for the vocal part and songs are played. and songs are played on the part of the Halmi's funeral ceremony scene. The instrumental and are played in various scenes for the accompaniment of the dance part. The musical structure of the mask play is flexible. This kind of flexibility of scene structure mainly concerned with the way of musical composition. The main structure of the mask play can be classified into two main styles according to the allocation of the vocal music. In first style, the vocal music is evenly dispersed. In second style, the vocal parts are concentrated in the rear section. As I mentioned earlier, no logical association is found in the matter of the scene arrangement. A scene arrangement has a deep connection with the arrangement of the music in each scene. In conclusion, the mixed arrangement of the scene in mask play is mainly concerned with the matter of the music arrangement in order to maintain the tension of the drama.

• Economic and Environmental Geology
• /
• v.51 no.6
• /
• pp.579-587
• /
• 2018

Chungnam Basin has been known as one of the largest Mesozoic basins in Korea, filled mainly with so-called Daedong Supergroup. The basin has evolved as the Early to Middle Jurassic intra-arc volcano-sedimentary basin developed on top of the Late Triassic to Early Jurassic post-collisional basin in this area, recording evolutionary history of the Mesozoic tectonics in the southwestern Korean Peninsula. This study carries out the geometric interpretations of the Seongjuri syncline and its surroundings in the central part of the Chungnam Basin, based on detailed structural field survey. Based on its doubly-plunging fold geometry, the Seongjuri syncline could be subdivided into the southwestern and northeastern domains. On the down-plunge profiles of the southwestern domain of the Seongjuri syncline as well as the underlying Okma fold, the Okma fault shows typical geometry of a basement-involved reverse fault that propagated up to the sedimentary cover. The profiles illustrate that the Seongjuri syncline occurs in front of the tip of the Okma fault, likely implying its origin as a part of the fault-related fold system. The result of this study will provide better insight into the structural interpretation of the Chungnam Basin, and will further provide useful information for the Mesozoic orgenic events of the southwestern Korean Peninsula.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.1
• /
• pp.265-277
• /
• 2019

The purpose of this study was to compare the effects of elastic band exercises and lunge on the knee Electromyography and Q-Angle in people with genu varum. The subjects of this study were healthy general people who had genu varum of 18 subjects. The subjects were randomly divided into two groups as a elastic band group (n=9, 6 males and 3 females, age: $22.55{\pm}2.05years$, height: $169.8{\pm}6.07cm$, weight: $66.44{\pm}9.83kg$) and a lunge group (n=9, 7 males and 2 females, age: $23.88{\pm}1.37years$, height: $173.66{\pm}6.72cm$, weight: $67.22{\pm}13.30kg$).The elastic band exercise and the lunge were performed every week, for four weeks. These results suggest that the Q-Angle of both knees showed differences before and after the intervention in elastic band group and lunge group. Also, The MVIC was no changes in both groups before and after the intervention except for the left foot in elastic band group and lunge group. As a result, the space distance of knees in both groups was significantly reduced. These result suggested that the elastic band exercise and lunge were effective ways in alleviating genu varum.

• Database Research
• /
• v.34 no.3
• /
• pp.148-158
• /
• 2018

The optical character recognition (OCR) is a technique to extract and recognize texts from images. It is an important preprocessing step in data analysis since most actual text information is embedded in images. Many OCR engines have high recognition accuracy for images where texts are clearly separable from background, such as white background and black lettering. However, they have low recognition accuracy for images where texts are not easily separable from complex background. To improve this low accuracy problem with complex images, it is necessary to transform the input image to make texts more noticeable. In this paper, we propose a method to segment an input image into text lines to enable OCR engines to recognize each line more efficiently, and to determine the final output by comparing the recognition rates of CLAHE module and Two-step module which distinguish texts from background regions based on image processing techniques. Through thorough experiments comparing with well-known OCR engines, Tesseract and Abbyy, we show that our proposed method have the best recognition accuracy with complex background images.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.5
• /
• pp.273-278
• /
• 2019

In this study, a new simple method for the estimation of hyperelastic material properties by indentation tests is proposed. Among hyperelastic material models, the Yeoh model with three material properties ($C_{10}$, $C_{20}$, $C_{30}$) is adopted to describe the strain energy density in terms of strain invariants. Finite element simulations of the spherical indentation of hyperelastic materials of the Yeoh model with different material properties are performed to establish a database of indentation force-displacement curves. The indentation force-displacement curves are fitted by cubic polynomials, which are approximated as a product of third-order polynomials of ($C_{10}$, $C_{20}$, $C_{30}$). A regression analysis is conducted to determine the coefficients of the equations for the indentation force-displacement curve approximations. A regression equation is used to estimate the hyperelastic material properties. The present method is verified by comparing the estimated material properties with true values.