• Fire Science and Engineering
• /
• v.24 no.6
• /
• pp.7-12
• /
• 2010

This paper is aimed the measurement and estimation the thermal interrelation based on leakage current. The leakage models are analyzed by parameters in open and closed (Panel) states and with wood dust and rainwater, charcoal powder in leakage current occurred point. The thermal characteristic of open state that leakage current is inputted in 90 mA is higher in charcoal powder ($105^{\circ}C$) than in wood dust and rainwater ($88.8^{\circ}C$). Charcoal powder that is inputted in 110 mA shows high thermal characteristic ($238.6^{\circ}C$) and the thermal ($238.6^{\circ}C$) is caused by material strain of electrical wire insulation and Panel. The closed state in 90 mA is higher in charcoal powder ($250.6^{\circ}C$) than in wood dust and rainwater ($90.8^{\circ}C$). The open and closed state appear thermal characteristics of two times in charcoal powder than in wood dust and rainwater. The thermal data that are open and close states are used electrical fire investigation and thermal characteristic for Leakage current.

• Korean Journal of Food Science and Technology
• /
• v.25 no.1
• /
• pp.39-45
• /
• 1993

The effects of enzymatic modification with pepsin and actinidin was studied on molecular weight distributions and functional properties of hydrolysates from soy protein isolate (SPI) differing in degree of hydrolysis. The hydrolyzed SPI by pepsin showed 41.5% degree of hydrolysis after 5 min, and maximum hydrolysis was obtained after 2 hours. Actinidin hydrolyzed SPI 26.71% degree after 1 hour. On SDS-PAGE, native SPI showed 9 distinguishable bands on SDS-PAGE gel. Pepsin treated SPI showed one broad band in the lower part of gel. This band was shifted further to the bottom of the gel and became faint as hydrolysis time increased. While actinidin treated SPI showed different SDS-PAGE pattern from pepsin. However PAGE patterns were similar with pepsin and actinidin treated groups. With pepsin treatment, solubility of SPI distinctively increased around isoelectric point(pI). Emulsifying activity (EA) and emulsifying stability (ES) showed marked increase over pH range of $3.0{\sim}8.0$. 5 min modified group had most excellent foam expansion (FE). Foam stability (FS) was increased as pepsin treatment time increased at pI. With actinidin treatment, solubility was increased. 60 min modified SPI had the most effective EA at pH 4.5. However ES was not effected by actinidin treatment. 5 min modified group was most effect in FE. FS was higher at alkaline pH.

• Korean Journal of Ichthyology
• /
• v.2 no.2
• /
• pp.182-202
• /
• 1990

Gobiid fish were collected monthly in Cheonsu Bay by a beach seine from the shallow water and by an otter trawl from the deep water from September, 1984 to August, 1986. Seasonal variation in species composition and biology of the major species were examined with the data of length and age composition. Fourteen speices of gobies were identified. Gobiid fish were more abundant in the shallow water than in the deep water. In the shallow water, they constituted 66% and 39% of the fish collected in the mud flat and the sand beach, respectively. The suction discs of the gobies explains that they inhabit successfully in the surf zone where the wave action is strong. Of the major species, Chaenogobius mororanus predominated in the shallow mud flat. A large number of adults of this species were obtained in Spring and their juveniles were collected from Summer through Autumn. Favonigobius gymnauchen was abundant in the shallow water, especially in the sand beach. This fish seemed to spawn from May through June, about two months later than Chaenogobius mororanus. Acanthogobius hasta juveniles lived in the shallow water and moved into the deep water as the fish grew. Chaturichthys stigmatias was collected mainly in the deep zone.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.11 no.2 s.54
• /
• pp.95-104
• /
• 2007

Three types of high-rise RC building structures having irregularity in the lower two stories were selected as prototypes and were performed nonlinear static analysis by using OpenSees to verify the analysis technique and to investigate the seismic capacity of those buildings. The first one has a symmetrical moment resisting frame (Model 1), the second has an infilled shear wall in the central frame (Model 2), and the third has an infilled shear wall only in one of exterior frames (Model 3). Fiber model, which consists of concrete and reinforcing bar represented from stress-strain relationship, is adapted used for simulate the nonlinearity of members, and MVLEM(Multi vertical linear element model) is used for simulate the behavior of wall. The analytical results are simulate the behavior of piloti stories well, for example, the stiffness and yield farce of piloti stories, the up-lift of wall and the variation of lateral stiffness of column due to the variation of axial forces. Overstrength of Model 2 and Model 3 are about 2 times larger than that of Model 1. The reason of the high oversttrength and ductility of Model 2 and Model 3 is that the conservative design of Model 2 and Model 3, whose beam and column sections are the same as those of Model 1. The ductilities of Model 1 and Model 3 are slightly larger than that of Model 1 and Model 3. Model 1 and Model 3 reached mechanism condition, whereas Model 2 failed to the shear failure of shear wall and the large axial forces in columns due to large overturning moment.

• Korean journal of applied entomology
• /
• v.51 no.3
• /
• pp.245-253
• /
• 2012

Benzylinedeneacetone (BZA) is a bacterial metabolite which is synthesized by at least two entomopathogenic bacteria, namely Xenorhabdus nematophila and Photorhabdus temperata subsp. temperata. It has been shown to possess inhibitory effects on insect cellular and humoral immune responses as well as antimicrobial activities against various species of bacteria and fungi. However, its relatively high phytotoxicity, and nonsystematic effect have thus far prevented its development into an optimal pesticide. This study screened five different BZA derivatives in order to select an optimal compound, which would have relatively high solubility and low phytotoxicity while retaining sufficient degrees of the immunosuppressive and antimicrobial activities associated with BZA. Hydroxylation of the benzene ring of BZA was found to significantly suppress its immunosuppressive and antimicrobial activities. Transformation of the ketone of BZA by carboxylation also suppressed the inhibitory activities. However, a shortening of the aliphatic chain of BZA into acetate form (4-hydroxyphenylacetic acid: HPA) did not decrease the inhibitory activity. HPA also showed much less phytotoxicity against the hot pepper plant Capsicum annuum, when compared to BZA. This study identified an optimal BZA derivative, which exhibited relatively little phytotoxicity, but retained a high degree of inhibitory activity to suppress insect immune responses and antimicrobial activities against plant pathogens.

• Journal of Adhesion and Interface
• /
• v.21 no.3
• /
• pp.93-100
• /
• 2020

3D printing technology enables proper objects to be made through an additive manufacturing method, but resulting in dimension deviation of the product due to contraction phenomenon as cooling melted filament resin injected from high-temperature use environment. In this research, we studied on acrylic adhesives for 3D printer build sheet in order to fabricate high-quality products with a precise shape and to well-mount without distortion. The solvent-free UV-curable acrylic adhesive formulation was designed by adding 4-acryloylmorpholine (ACMO) with high adhesion, toughness, glass transition temperature so that adhesion properties are stable at high temperature and products are easily mounted/detached from the adhesives. The designed formulation was polymerized through two-steps using post-addition of monomers. Using this, the acrylic adhesive was coated to make a film and then analyzed using various experimental techniques. As a result, the fabricated adhesive exhibited high glass transition temperature and there was little gap in peel strength before and after thermal treatment. Moreover, it was confirmed by rheological analysis that this adhesive can provide great bonding/debonding ability without distortion. We demonstrated the fabrication of a rectangular product using a 3D printing method using our acrylic adhesive as a build sheet. Mounting ability and workability were satisfactory and dimension deviation of the product was tiny. Because the product is easily detachable from the acrylic adhesive developed here than conventional build sheets, it is expected that this will provide work convenience to users who use the 3D printer.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.16 no.4
• /
• pp.215-224
• /
• 1997

A study has been made to investigate the acoustic emission(AE) behavior during the tensile and fracture tests of an Al-Li 8090 alloy, and to correlate it with the deformation mechanisms as a function of microstructure and plate orientation. Mechanical tests and AE measurements were conducted on the specimens with different microstructures (the ${\delta}'$ phase dominant microstructure and the $S'+{\delta}'$ microstructure) and with different orientations (L and ST). In the ${\delta}'$ structure, continuous emissions were produced in both the L and ST oriented specimens, while only the burst emissions were observed to occur in the $S'+{\delta}'$ structure. It was inferred from the above results that continuous type emissions were mainly attributed to the shearing of coherent ${\delta}'$ precipitates in the ${\delta}'$ structure, while the burst type emissions were produced due to the shearing or microcracking of incoherent S' phase in the $S'+{\delta}'$ structure. As to the effect of plate orientation, the ST oriented specimens showed more burst emissions than the LT oriented ones. A large number of burst emissions produced in the ST specimen were presumably due to the rapid crack propagation along the intergranular boundary located parallel to the crack propagation direction.

• Journal of Technology Innovation
• /
• v.23 no.2
• /
• pp.1-31
• /
• 2015

Various concepts and practices of public deliberation have been exercised over the last three decades in western countries for science and technology (ST) governance. There has been a general social consensus for the need of such new governance notwithstanding, ends and means to achieve it varied. Among various rationales, while normative and substantive perspectives are explicitly claimed in public as reasons for public engagement in ST policy making, instrumental perspectives tend to be implicitly arranged by interested parties and still affecting policy significantly. This paper therefore, examines the implications of such instrumental perspectives in public engaged ST governance. To do so, this paper analyses the discourses and practices of public deliberation for ST governance in the UK from the late 1990's until the mid 2000's. It examines the proposals made by various policy institutions and two real public deliberations- the GM Dialogue for commercialization of genetically modified crops and the Committee on Radioactive Waste Management(CoRWM)'s programme. This study finds that policy institutions tried to employ public deliberation as strategic instrument for their policy interest, which contrasted with their outwardly claimed rationales of democratic policy making and better quality in decision for ST governance.

• Journal of fish pathology
• /
• v.19 no.1
• /
• pp.7-15
• /
• 2006

Amyloodinium sp. was found on the gills of mullet (Mugil cephalus) cultured on land. No external symptoms in the diseased fish were found except decoloration of the gills. In fresh preparations of the gills the parasites were opaque round or oval shape with a bright nucleus and 43.5 ㎛ (18.2～72.7, n=20) in size. In preparations added a drop of Lugol solution, they were black with the same shapes in fresh preparations and 43.5 ㎛ (n=20) in size. The parasites were stained black and blue in a droplet of Lugol solution and Diff-Quick III solution, respectively and their sizes were a little larger than in wet preparations. After stained with May-Grunwald Giemsa, the parasites appeared granular eosinophlic in the peripheral cytoplasm and granular strong basophilic in the center. In silver impregnated specimens the peripheral granules were negative and the central ones positive. The granules appeared brown in purplish cytoplasm after staining with Lugol solution. The parasites developed by binary division when they were cultivated in filtered seawater at 20℃. Histopathologically severe epithelial hyperplasia and fusion in the gill filaments resulted in clubbing, especially the proximal region of the filament. Epithelial hyperplasia was also found in the basal regions of the gill filaments and some epithelial cells were occasionally detached from the filaments. Some pear-shaped trophonts of the parasites with rhizoid attached on the gill filaments showing hyperplasia of the epithelial cells and mucous cells.

• Journal of Science and Technology Studies
• /
• v.15 no.1
• /
• pp.145-180
• /
• 2015

Human Genome Project was a big science done by United States, U.K., France, China, Germany and Japan. But in Korea HGP was not constructed because of lack of governmental funding and failure to attract relevant actors' attention in spite of small voices from early genome researchers and some family members of patients with incurable diseases. This article does not argue that HGP in Korea was an undone science, a concept claimed by Scott Frickel, et al. Instead, it shows the historical fact that HGP was not constructed in Korea in 1990s and analyzes how genomic researches could become possible in Korea in the post-genomic age using the framework of triple-helix. In Korea, researchers have constructed hybrid networks and organizations that intermingles laboratories of university, industry, and government to conduct genomic researches which requires a lot of financial funding. This structure is different from the entrepreneurial university seen in developed countries such as the United States. Using two examples, this article shows that founding a start-up company by university researchers was not an option as in the United States, but a necessity in order to obtain enough funding to conduct genomic researches in Korea. Otherwise, researchers in Korean universities had to form hybrid networks with government to obtain small amount of funds to conduct researches. I argue that this phenomenon shows multifaceted characteristics of institutional structures regarding genomic researches in Korea.