• The KIPS Transactions:PartD
• /
• v.15D no.5
• /
• pp.681-690
• /
• 2008

In proteomics research, the identification of differentially expressed proteins observed under specific conditions is one of key issues. There are several ways to detect the change of a specific protein's expression level such as statistical analysis and graphical visualization. However, it is quiet difficult to handle the spot information of an individual protein manually by these methods, because there are a considerable number of proteins in a tissue sample. In this paper, using database and data mining techniques, the application plan of OLAP data cube and Discovery-driven exploration is proposed. By using data cubes, it is possible to analyze the relationship between proteins and relevant clinical information as well as analyzing the differentially expressed proteins by disease. We propose the measure and exception indicators which are suitable to analyzing protein expression level changes are proposed. In addition, we proposed the reducing method of calculating InExp in Discovery-driven exploration. We also evaluate the utility and effectiveness of the data cube and Discovery-driven exploration in the lung cancer 2-DE gel image.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.175-186
• /
• 2010

When a rigid post is exposed to traffic, it is hazardous not only to head-on impacts but also to side impacts. Clip-type slip base is an effective measure to reduce the severity of head-on impacts and side impacts as well because of its multi-directional release mechanism. Side impact tests were conducted and the results were analysed to demonstrate the hazardousness of a rigid post to a side impact and the crash worthiness of a post having clip-type slip base. For that, side impact test standard was made adapting the NCHRP Report 350, and 820kg-50km/h side impact tests were made for posts of D101.6mm(t=4.2mm) with and without slip base. Additionally, 35km/h side impact to the same post with slip base was conducted to check whether the clip-type slip base release mechanism works properly to the low impact speed. The tests revealed that the rigidly connected post was very hazardous to side impact while the post with the clip-type slip base reduced the impact severity tremendously.

• Journal of the Korean Geosynthetics Society
• /
• v.13 no.4
• /
• pp.11-20
• /
• 2014

The behaviors and stability of reinforced subgrade with short geogrid were examined and evaluated during construction. First of all, analytical approach for the minimum length of geogrid was performed to guarantee stability during construction loading state. Secondly, the economic aspects for reinforced subgrade were compared with between domestic standards applying with 0.7 H reinforcement length and new way to mix short and long reinforcement. Full scale railroad subgrade was constructed with the size of 5 m high, 6m wide, and 20m long to verify the stability of the subgrade with the length of 0.3 H, 0.35 H, 0.4 H reinforcement. Total 51 sensors were installed to measure settlement, bulging, and the change of stress of the subgrade. It is concluded that the reinforced subgrade with short(0.35H, 35% of height) geogrid had stability within allowable level of deformation and stress increment during construction.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.4
• /
• pp.515-522
• /
• 2011

The purpose of this study was to evaluate the material characteristics of SHN400 steel, which is suitable as a steel material for building structures, using the experimental approach. For this purpose, the chemical composition test, tensile test, macro test, micro test, and charpy notch impact test were conducted with specimens taken from the highest, thickest, and commonly used H-beams for girder or beam members. Each test was conducted under the Korean Standard(KS) test conditions. All the test results satisfied the requirements of KS (KS D 3866) and the steel material for seismic design. The carbon equivalent value (Ceq), which is related to weldability, and the yield ratio, which is related to inelastic behavior, showed especially good results. Thus, SHN400 is definitely suitable as the steel material for building structures.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.970-970
• /
• 2012

최근 치수의 기능을 수행하면서 원래 자연하천의 모습을 보전 혹은 복원하는 "생태하천 복원 공법"의 필요성이 대두되고 있으나 구체적인 공법에 대한 연구는 미미한 실정이다. 본 연구에서는 하천 내 시설물의 조성 시 유황에 따른 자연 하안 유도와 습지형태의 생물 서식공간 조성 유무를 평가하기 위하여 평창강 일원에 목재 유도틀을 설치하고 이에 따른 지형변화, 저서무척추동물을 포함한 수생생물들의 서식특성을 분석하였다. 평창강 금당계곡 일원을 대상으로 RMA-2 모형의 범용프로그램인 SMS 모형을 통해 수리 특성분석을 실시하였고 안산에 있는 수리모형 실험장에서 기본 수리특성 실험 후 수리적 안정성이 확보된 지점에 목재 유도틀을 2009년 9월에 설치하여 유도틀 설치 전과 설치 후 2010년 10월까지의 지형변화를 분석하였다. 지형의 측량은 광파측정기(니콘 DTM-520)로 하였으며 측량된 자료를 이용하여 Contour Map을 작성하여 지형변화를 분석하였고, 유도틀 설치지역을 중심으로 2010년에 3차에 걸쳐 지형 및 생물상 변화에 대한 정량 및 정성조사를 실시하여 비교분석 하였다. 유도틀 설치 후 2010년 하절기에 집중호우에 의한 유도틀의 파손 및 형태변형 등 문제가 없어 수리적으로 안정한 것으로 판단되었다. 지형 변화의 측면에서는 유도틀 조성 전 사질로 되어있던 단순한 선형의 하안이 유도틀 설치 후 다양한 하상재질 및 형태가 변화했으며 유도틀의 배치에 따라서 굼치 및 둠벙형 습지가 형성되었다. 유도틀 설치지역의 3개지점(상부, 중간배후습지, 하부)에서 저서무척추동물에 대하여 모니터링한 결과, 설치된 유도틀의 중간지점에서 가장 높게 종의 서식이 확인되었으며 상부지점과 하부지점은 상대적으로 낮게 나왔으나 상부지점 보다는 하부지점이 양호하게 나타났다. 조사시기별 개체수의 변화에서는 종수변화와 패턴이 유사하게 나타났으며 깔다구와 꼬마줄날도래등 특정종의 증식이 많았다. 또한, 굼치 및 둠벙형 습지 내에 어류의 치어 및 유어, 양서류, 파충류등 다양한 생물의 서식이 확인되었다. 이는 유도틀에 의해 생성 및 유도된 지형변화가 하천을 기반으로 생활하는 생물들에게 다양한 피난처 및 은신처 역할을 잘 제공하고 있음을 보여준다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.2
• /
• pp.121-127
• /
• 2014

An atomistic-based finite bond element model for predicting the tearing mode (mode III) fracture of a single-layer graphene sheet (SLGS) is developed. The model uses the modified Morse potential for predicting the maximum strain relationship of graphene sheets. The mode III fracture of graphene under out-of-plane shear loading is investigated with extensive molecular mechanics simulations. Molecular mechanics is used for describing the displacements of atoms in the area near a crack tip, and linear elastic fracture mechanics is used outside this area. This work shows that the molecular mechanics method can provide a reliable and yet simple method for determining not only the shear properties of SLGS but also its mode III fracture toughness in the armchair and the zigzag directions; the determined mode III fracture toughness values of SLGS are $0.86MPa{\sqrt{m}}$ and $0.93MPa{\sqrt{m}}$, respectively.

• The Korean Journal of Petroleum Geology
• /
• v.10 no.1_2 s.11
• /
• pp.1-9
• /
• 2004

A total of 17 exploratory wells were drilled from the Block VI-1 and recently commercial gas field was discovered in the Ulleung Basin. Thermal maturity of organic matter in the sediments from the drilling wells were evaluated for the characterization of the petroleum system of the basin. Level of thermal maturation of organic matter is different depending on the area to area. The top of oil window is located at about 800 m in the Dolgorae 5 area, and it is relatively deeper in both western and northern areas. It seems that thermal maturity of organic matter reached present stage before tectonism in the deformed zone 2, whereas thermal maturation continued after tectonism in other zones.

• Fire Science and Engineering
• /
• v.24 no.1
• /
• pp.81-89
• /
• 2010

In general, fire resistance is determined through the building' uses and stories. But recently a fire engineering design that is done by the calculation of design fires from the fire cell and an evaluation of stabilities for structural behavior at fire condition have applied to almost of countries as a major alternative against a prescriptive fire design. To adopt and utilize the fire engineering design into Korea, at first, we evaluated structural stability of 21st stories steel residential building at fire condition through fire engineering design and secondly the fire protection cost was analyzed with fire engineering design method and the prescriptive one, respectively. No fire protection materials for satisfaction of building law at structural members such as columns and beams were needed and about 90 % of fire protection cost was saved.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.5_6
• /
• pp.360-370
• /
• 2004

Adaptive mesh refinement(AMR) is one of the popular computational simulation techniques used in various scientific and engineering fields. Although AMR data is organized in a hierarchical multi-resolution data structure, traditional volume visualization algorithms such as ray-casting and splatting cannot handle the form without converting it to a sophisticated data structure. In this paper, we present a hierarchical multi-resolution splatting technique using k-d trees and octrees for AMR data that is suitable for implementation on the latest consumer PC graphics hardware. We describe a graphical user interface to set transfer function and viewing / rendering parameters interactively. Experimental results obtained on a general purpose PC equipped with an nVIDIA GeForce3 card are presented to demonstrate that the proposed techniques can interactively render AMR data(over 20 frames per second). Our scheme can easily be applied to parallel rendering of time-varying AMR data.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.743-750
• /
• 2016

In this research, the effects of the strength and stiffness of shear walls on the design strength of coupling beams are studied in the shear wall-coupling beam structural system widely used as the lateral-drift resistant system of high-rise buildings. The results show that the design strength of the coupling beams decreases with decreasing concrete strength and core wall thickness, but the shape remains unchanged. In all six models, the design strength of the coupling beams has the largest value at the 10~15th floors in a 40-story building. In other words, the design strength of the coupling beams has the largest value at 0.25H~0.375H where the inflection point exists. The thicker the walls, the smaller the change in the member forces. The thickness of the coupled shear walls has more influence on the design strength of the coupling beams than the concrete strength.