• Journal of the Korean Society of Radiology
• /
• v.11 no.7
• /
• pp.555-564
• /
• 2017

The current radiation risk assessment for occupational exposure is based on the measured exposure dose and health checkups of workers. This people-centered risk assessment may occur errors because absence of using personal dosimeter or unrelated health symptoms of individuals lead to difficulties in obtaining accurate data from workers. In addition, although the established legal upper dose limit was used as a reference for the assessment, it does not imply that this limit is the optimal dose of radiation workers should get; ALARA principle should always be appreciated. Therefore, a new risk assessment model that can take account of all the important factors and implement optimization of radiation protection is required at the national level. In this paper, based on the KOSHA Risk Assessment, we studied on the workplace-centered risk assessment model for radiation field rather than the people-centered. The result of the study derived a right model for radiation field through the analysis of the risk assessment methods in various fields and also found data acquisition methods and procedures for applying to the model. Multidimensional model centering on the workplace will enables more accurate radiation risk assessment by using a risk index and radar plot, and consequently contribute to the efficient worker management, preemptive worker protection and implementation of optimization of radiation protection.

• Proceedings of the ESK Conference
• /
• 1997.10a
• /
• pp.179-185
• /
• 1997

작업장 뿐만 아니라 일상생활에서도 결코 무시될 수 없는 것이 레져활동으로 인한 소음이다. 최근 급격히 늘어가는 개인 휴대용 카세트(Personal Cassette Players: PCP)사용은 심각한 소음성난청 발생이 우려된다. 본 연구는 PCP사용에 관련된 여러 인자들이 청력손실과 어떻게 얼마나 관련이 있는가를 파악 하고 PCP를 일정시간 사용했을 때 오는 청력 손실을 정량적으로 파악, 분석하는데 근본 목적을 둔다. 정상 청력을 가진 피실험자 18명의 대학생들을 대상으로 정상 청취조건 그리고 배경소음(지하철)에 노출 중과 후의 사용환경과 소음원으로 Hard Music, Soft Music 및 Language/News를 고려하여 평균소음도와 최고 소음도를 측정하였다. 또한 현실적 상황을 고려한 2시간 정도의 PCP의 청취 전과 후의 청력변화를 측정하였다. 통계 분석 결과, 사용환경과 소음원에 대해 휴대용 카세트 청취 소음수준이 유의한 차이가 있었으며, 특히 Hard Music 청취시에는 95dB, 그리고 지하철 소음하에서는 92dB의 높은 (위험한) 청취수 준을 보였다. 최고소음수준의 경우 NIOSH기준을 초과하는 117dB 정도의 매우 위험한 수준까지 나타났다. 또한 2 시간 정도의 PCP소음에 노출 전 후의 청력손실이 주파수 대역에 걸쳐 유의하게 나타났으며, 특히, 가장 민감한 주파수 대역인 4000Hz에서 최고 7dB 정도의 청력 손실이 발생하였다. 본 연구 결과에 따라, PCP사용에 대한 청력보호대책안을 제시하고자 한다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.1
• /
• pp.127-136
• /
• 2024

Because the hazardous working environments and high labor intensity of the root industry can potentially impact the health of workers, current regulations have focused on measuring and controlling environmental factors, on a semi-annual basis. However, there is a lack of quantitative criteria addressing workers' health conditions other than the physical work environment. This gap makes it challenging to prevent occupational diseases resulting from continuous exposure to harmful substances below regulatory thresholds. Therefore, this paper proposes a machine learning-based method for determining the peak level of risk in root industry work environments and enables real-time safety assessment in workplaces utilizing this approach.

• Journal of Preventive Medicine and Public Health
• /
• v.24 no.1 s.33
• /
• pp.37-44
• /
• 1991

In the plywood manufacturing factory established in 1979, female 3 workers who had exposed to adhesives containing formaldehyde for more than 48 months of duration suffered from eye, nasal, oral, throat and skin irritation and dyspnea as chief complaints. The actual level of the exposure to formaldehyde were not estimated when the exposed workers started to have above symptoms. The environmental monitoring of workplace was measured on April 25, 1990, and the concentration of formaldehyde revealed 0.2 ppm, however the exhaustive ventilatory system was already installed at that time. Twenty six subjects from entire factory were examined by questionnaire, physical examination and spirometry, etc. on August 22, 1990. Significant difference was observed in symptoms and signs of nasal, oral and throat irritation between the exposed group with longer duration and that with short duration. When the exposed group with longer duration was compared to the group of nonexposed, symptoms and signs of nasal, oral, throat and skin irritaion, chest tightness and dullness were significantly increased in the former group. The results of the spirometric test showed that the forced vital capacity and the forced expiratory volume at 1 second were decreased among the exposed group with longer duration but not significant.

• Journal of Korean Academy of Nursing
• /
• v.40 no.5
• /
• pp.736-746
• /
• 2010

Purpose: This study was done to identify the distribution and related factors for stage of change for wearing hearing protection devices (HPDs) by workers in environments with high noise. Predictors of Use of Hearing Protection Model and Trans-theoretical Model were tested. Methods: The participants were 755 workers from 20 noisy work places in Busan and Gyeongnam. Data were collected from January to April 2008 using self-administered questionnaires, and analyzed using multiple logistic regression. Results: There were significant differences in social mode (OR=1.35, 95% CI: 1.06-1.73) between precontemplation/contemplation and preparation stage, in males (OR=2.36, 95% CI: 1.24-4.51), workers with high school education or less (OR=1.39, 95% CI: 1.28-2.78), shift workers (OR=1.50, 95% CI: 1.02-2.21), workers who previously worked in noisy places (OR=1.39, 95% CI: 1.20-2.34), and workers who had previous hearing examinations (OR=1.89, 95% CI: 1.25-2.85), in the social model (OR=1.59, 95% CI: 1.42-1.78), and self-efficacy (OR=1.05, 95% CI: 1.02-1.08) between workers in preparation and action stages, in length of time working in noisy work places (OR=2.26, 95% CI: 1.17-4.39), social model (OR=1.66, 95% CI: 1.33-2.08), and perceived benefit (OR=0.95, 95% CI: 0.93-0.97) between action and maintenance stage. Conclusion: Social model was a common factor showing differences between two adjacent stages for wearing HPDs. The results provide data for developing programs to encourage workers to wear HPDs and application of these programs in work settings.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.9 no.1
• /
• pp.14-22
• /
• 1999

This study was conducted to evaluate workplace protection factors(WPF) for two half-facepiece respirators (HR-1, HR-2) in welding workplace and to provide data on the workplace performance of negative-pressure, half-facepiece respirators against airborne particulate contaminants. The outside iron oxide(Fe2O3) concentration of welding fume for the respirator HR-1 ranged from 0.177 to $12.508mg/m^3$ with a geometric mean of $1.118mg/m^3$ and the HR-2 respirator showed a iron oxide range of 0.500 to $3.494mg/m^3$ with a geometric mean of $1.082mg/m^3$. But the inside oxide concentration of welding fume for the respirator HR-1 ranged from 0.002 to $0.364mg/m^3$ with a geometric mean of $0.019mg/m^3$ and the HR-2 respirator showed a iron oxide range of 0.012 to $0.639mg/m^3$ with a geometric mean of $0.041mg/m^3$. The iron oxide inside concentrations were significantly less than $5mg/m^3$(TLV) for both of respirators. The WPF were ranged from 3 to 3744 with a geometric mean of 60 for HR-1 and range from 2 to 129 a geometric mean of 26 for HR-2. And, in this study, the 5th percentile of the workplace protection factors for half-facepiece aspirators (HR-1, HR-2) were 11.2 and 7.1, respectively. The correlation relationship between the Quantative Fit Factors(QNFT) and the WPF for half-mask negative pressure respirators were 0.099 and 0.460.

• Journal of the Korean Society of Safety
• /
• v.21 no.2 s.74
• /
• pp.138-142
• /
• 2006

Occupational asthma is commonly known to be induced by isocyanate exposure. Spray painters generally use isocyanates for 2-pack spray painting to coat wooden panel surfaces in the furniture industry in South Australia. Due to a lack of actual exposure data, this study conducted environmental and dermal/ocular monitoring from a company in the furniture industry. According to this study, there was no significant airborne contamination, due to the use of high volume low pressure (HVLP) spray guns, low concentration of hardener in paint solutions and appropriate respirator like full face-air line respirator. There was no significant HDI detection in the general work area around the spray booths. Owing to the use of disposable nitrile gloves during the spray painting, no significant dermal exposure was found. According to color monitoring, there was a possible dermal exposure from surfaces in the workplace, unless either protective gloves were worn or appropriate working practices like clean-up process and storage in a secure places. No eye contamination was detected from the spray painters. No significant exposure levels from inhalational, dermal, ocular were found. The area of most concern was work practices.

• Journal of the Korean Vacuum Society
• /
• v.19 no.6
• /
• pp.415-422
• /
• 2010

Recently as the reports on toxicity of some nanomaterials and the nanoproducts containing these nanomaterials are rapidly increasing, the safety management issues about nanomaterials and nanoproducts are emerging hot. Especially safety in the workplace and that of consumers and the protection of environment, in other words safeties throughout the life-cycle of nanomaterials and products become core issues. Despite the importance of such a safety management, however, it is very difficult to construct the hard regulatory framework for safety, owing to uncertainties and potentialities of nano-risk. In this paper I will look around the ethical principles and guidelines for safety management which are preferentially required before going into the discussion on the construction of hard-regulation such as law and something like that. Under the circumstance that hard-regulations for safety management are not implementable, these principles and guidelines are expected to play a leading part in building the responsible risk-governance framework for nanomaterials and nanoproducts, and finally to become a cornerstone of the hard risk-governance framework.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.3
• /
• pp.175-184
• /
• 2008

As defined by the experts, safety education is the basic method through which people can protect themselves from the dangers in workplace. Therefore, safety education is an important safety measure that can be effectively utilized in disaster prevention without any certain limit. The current practice of safety education in construction sites, however, is all formal and has no substance. Safety education became a mere boring time to workers since the material is not related to them, and does not reflect the individual personalities, which cannot induce voluntary participation of workers. Thus, it is vital to develop various safety education models suitable for individual personalities of construction workers. This study aims to provide the basic data necessary to establish safety education models according to individual personalities of construction workers. Based on the analysis of the preliminary stuff and interviews, the typical individual personalities of construction workers and safety education factors were examined, and the frameworks for each were established. Based on results of applying them to actual cases, directions to improve safety education in construction sites are presented.

• Journal of Bio-Environment Control
• /
• v.31 no.3
• /
• pp.237-245
• /
• 2022

Peach is a typical summer fruit which can be used for various food, processed food, and fragrance ingredients in Korea. Peach is also known as one of serious allergens which make difficulty for farm workers during peach sorting operations. After peach harvesting, it moves to the sorting operations for removing cover material, removing fuzz on peach surface, sorting by size, and packing. The air-samplers and optical particle counters were used to analyze the characteristics of fine dust generation by location and operation characteristics in the experimental peach farms. During removing peach fuzz, the dust concentrations were increased by 6.89 times on total suspended particulate (TSP), 2.13 times on PM-10 (particulate matter), and 1.30 times on PM-2.5 compared to non-working periods, respectively. During removing peach covering materials, the dust concentrations were increased by 3.14 times on TSP, 1.91 times on PM-10, and 1.43 times on PM-2.5 compared to non-working periods, respectively. This represents peach fuzz can be affected to farm workers during peach sorting operations.