• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.6
• /
• pp.60-75
• /
• 2019

Nowadays, interest in safety of pedestrians who are relatively weak when compared with vehicles increases. Also, concern for pedestrian accidents on crosswalks increases. For these reasons, scrambled crosswalks which are considered to contribute pedestrian safety by reducing conflicts between vehicles and pedestrians are actively discussed and there are also a few intersections where they are actually installed. However, scrambled crosswalks must include all-red phase for all vehicle traffic flows, which inevitably leads to increase of lost time per cycle. Therefore, evaluation in terms of efficiency should be done before installation of scrambled crosswalks. This research suggests installation criteria for scrambled crosswalks so that it is possible to judge whether installation of scrambled crosswalks is appropriate only by surveying vehicle traffic volume and pedestrian traffic volume. This research derives optimum cycle length from signal optimization models which considers both vehicle traffic volume and pedestrian traffic volume. From this optimum cycle length, this research compares total delay time before and after installation of scrambled crosswalks. From an analysis, two research results are derived. Firstly, there is critical traffic volume above which installation of scrambled crosswalks can not efficient. Secondly, appropriate areas for installation of scrambled crosswalks are different by each signal intersection or by each signal system and those difference vary. From these results, this research suggests installation criteria for scrambled crosswalks which consists of two steps. The delay time of the pedestrians may be increased after the diagonal crosswalk is installed, but it may be desirable to install in consideration of the appropriate traffic level to ensure safety.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.2
• /
• pp.1-14
• /
• 2012

The purpose of this study is to derive a desirable riverfront construction plan to me for the activities of citizens through the evaluation and analysis of the urban riverfront space from the perspective of universal design. Therefore, previous studies were examined in order to induce evaluation tools that bhve been grafted from the universal design concept; in addition, a field survey was conducted in Shincheon, Daegu, which was selected as the study target, in order to induce problems and improvement directions from the perspective of universal design. The major results can be summarized as follows. (1) In the 'fairness' aspect, all the items such as installation of integrated functional signage, showing pictures, symbols, foreign language signs, and restroom entrances signage were determined to be 'All Unsuitable' for all sections; and therefore, it is necessary to improve the fairness of usage for everybody. (2) In the 'Functionality(Usability)' aspect, all items such as installation of bicycle paths beside access roads, installation of integrated functional signs, and night light signs were determined to be 'All Unsuitable' for all sections; therefore, it is necessary to improve the functionalities of these facilities. (3) In the 'Convenience' aspect, all items such as the installation of bicycle parking areas, continuous rest facilities, and back and ann support(handles) at resting facilities were determined to be 'All Unsuitable' for many sections; therefore, it is necessary to improve these facilities for the convenience of usage. (4) In the 'Information(Recognizability)' aspect, all items such as showing pictures, symbols, foreign languages and installation of night light signs, and restroom entrances signage were determined to be 'All Unsuitable' for all sections; therefore, it is necessary to improve the recognizability to minimize misunderstandings and confusion. (5) In the 'Safety' aspect, all items such as the installation of safe pedestrian paths in parking areas, using anti-slip and shock absorption materials on restroom floors, and the continuous installation of pedestrian paths that are separate from bicycle paths were determined to be 'All Unsuitable' for all sections; therefore, it is necessary to improve the safety to prevent accidents. (6) In the 'Amenity' aspect, access roads, parking areas, hygiene facilities, convenience facilities, and waterside facilities for many sections were determined to be 'All Unsuitable'; therefore, it is necessary to conduct more concentrated hygiene management. (7) In the 'Accessibility(Mobility)' aspect, all items such as the installation of safe pedestrian paths in parking areas, and continuous pedestrian paths that are separate from bicycle paths were determined to be 'All Unsuitable' for all sections; therefore, it is necessary to improve the accessibility to provide safety and convenience. (8) In the 'Durability' aspect, access roads, parking areas, rest facilities, convenience facilities, fitness facilities, and waterside facilities were determined to be 'All Unsuitable' for many sections, therefore, it is necessary to improve sunken or damaged areas by inspecting facilities by section.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.39-42
• /
• 2010

최근 보행자가 교량의 진동에 의한 불안감을 느끼는 경우가 발생되면서 설계 단계에서 진동에 대한 고려하고 있다. 그러나 설계자는 범용유한요소프로그램에 이동하중을 적용하여 동적응답해석을 하는 것에 어려움을 느끼고 있으며 그 결과 Meister감각곡선에 의한 진동사용성 평가도 정확히 수행되지 않고 있다. 본 연구에서는 설계자들이 수행하는 교량의 진동사용성 평가방법의 간편한 적용을 위하여 이동하중모델 생성툴을 연구하였으며, 범용유한요소프로그램으로 모델링 된 교량의 매개변수를 변화해가며 진동사용성 평가를 수행하였고 연구 결과 중 매개변수의 하나인 보요소의 길이에 따른 진동사용성 평가결과만을 작성하였다. 평가결과 보요소의 길이에 따라 교량에 발생되는 진동과 가속도의 응답치가 다르게 나타났으며, 발생되는 주요주파수 범위도 다르게 해석되었다. 이러한 동적응답의 결과가 다르게 해석되면서 Meister 감각곡선에 의한 평가등급이 차이도 발생되었다. 따라서 정확한 진동사용성 평가를 위해서는 동적응답해석 시 다양한 매개변수에 의한 동적응답의 결과에 대한 연구는 물론 다양한 교량 형식과 그에 맞는 모델링에 대한 많은 연구가 필요할 것으로 사료된다.

• Journal of Digital Convergence
• /
• v.12 no.11
• /
• pp.451-459
• /
• 2014

This study was to performed to get the reference data of the kinetic parameters for normal subjects according to the arm swing type. Forty-five normal subjects($22.62{\pm}2.69years$) pariticpated in this study and preformed 4 sequence according to the arm swing type as follows; first procedure-normal arm swing, second procedure-one arm swing, thrid procedure-no arm swing, fourth procedure-fitness arm swing. There were significant differences according to the arm swing type in the kinetic parameters such as walking speed, hip power, ground reaction force of vertical in terminal stance phase(p<.05). These finding can be utilized (a) as a reference for kinetic data of gait analysis in normal subjects, and (b) as an aide in evaluating and treating patients who have problems relating to gait.

• Journal of Biomedical Engineering Research
• /
• v.24 no.4
• /
• pp.363-367
• /
• 2003

Contact area and pressure are important factors which directly influence a life of knee implants. Since implant's mechanical functions should be experimentally evaluated for clinical use, many studies using a knee simulator and a pressure sensor system have been conducted. However it has not been reported that the contact pressure's distribution of a knee implant motion was estimated in real-time during a gate cycle. Therefore. the objective of this study was to analyze the contact pressure distribution for the motion of a joint using the knee simulator and I-scan sensor system. For this purpose, we developed a force-controlled dynamic knee simulator to evaluate the mechanical performance of artificial knee joint. This simulator includes a function of a soft tissue and has a 4-degree-of-freedom to represent an axial compressive load and a flexion angle. As axial compressive force and a flexion angle of the femoral component can be controlled by PC program. The pressure is also measured from I-scan system and simulator to visualize the pressure distribution on the joint contact surfaces under loading condition during walking cycle. The compressive loading curve was the major cause for the contact pressure distribution and its center move in a cycle as to a flexion angie. In conclusion, this system can be used to evaluate to the geometric interaction of femoral and tibial design due to a measured mechanical function such as a contact pressure, contact area and a motion of a loading center.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.10a
• /
• pp.210-211
• /
• 2010

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.1361-1362
• /
• 2010

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• v.10 no.1
• /
• pp.94-97
• /
• 2005

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1D
• /
• pp.101-110
• /
• 2009

Urban Designers and Planners are interested in creating barrier-free (BF) environments as the demand for social equity increases. BF design consists of design strategies for modifying buildings or facilities to be used by the physically disadvantaged or disabled. To construct buildings or facilities to be "Barrier-free", design standards specifically modified for the physically disadvantaged or disabled should be applied. The purpose of this study is to analyze the BF design standard used in the national laws and provide suggestions for their future improvements. In the study national laws in four countries were reviewed and important BF standards to be used in the laws were identified using a frequency analysis. The results of the frequency analysis were applied to the BF assessment criteria for sidewalk design. Then a field assessment for two sidewalks located in Seoul metropolitan region was conducted using the refined BF criteria. The findings from the field assessments indicated that current regulations were not appropriately designed to provide sufficient convenience for the disabled. It is needed to enhance the BF standards in the domestic regulations to offer sufficient mobility to the physically disadvantaged or disabled.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.1
• /
• pp.1-9
• /
• 2019

The objective of this study was to derive the served distance of the senior-friendly park considering physical changes, which were estimated through a comparison experiment at an actual target site. The time to walk 500m was examined because 500m is considered the served distance of a neighborhood park and as a standard set by the city. The mean walking time of the control group (younger than 65 years) was 536 seconds, while that of the treatment group (older than 65 years) was 889 seconds, which was approximately 1.7 times longer than the control group. The results of this study also showed that the walking time of females was longer than that of males when they were older than 65 years old. The walking velocities of the control group and the treatment groups were also calculated using the mean walking time. The weight estimated by a proportional formula was 0.6. When it was applied to 500m, which is the served distance of a neighborhood park, the served distance of the senior-friendly park was estimated as 300m. Lastly, the green service excluded area was quantified by applying the 300m, the served distance of a senior-friendly park, to the Jung-gu, Daegu, which had the highest elderly population in the Daegu Metropolitan City. The results of this calculation showed that the area served by a city park was $2,425,747m^2$ and the area excluded from the city park service was $4,627,700m^2$ for senior citizens. The results also showed that, in terms of the distributive equity, the administrative districts received unequal am ounts of urban green area services.