• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.2
• /
• pp.147-161
• /
• 2012

This study is to assess the effect of horizontal misfit of an implant supported 3-unit fixed prosthodontics on the stress development at the marginal cortical bone surrounding implant neck. Two finite element models consisting of a three unit fixed prosthodontics and an implant/bone complex were constructed on a three dimensional basis. The three unit fixed prosthodontics were designed either shorter (d=17.8mm model) or longer (d=18.0mm model) by 0.1mm than the span of two implants placed at the mandibular second premolar and second molar areas 17.9mm apart. Fitting of the fixed prosthodontics onto the implant abutments was simulated by a total of 6 steps, that is to say, 0.1mm displacement per each step, using DEFORM 3D (ver 6.1, SFTC, Columbus, OH, USA) program. Stresses in the fixed prosthodontics and implants were evaluated using von-Mises stress, maximum compressive stress, and radial stress as necessary. The d=17.8mm model assembled successfully on to the implant abutments while d=18.0mm model did not. Regardless if the fixed prosthodontics fitted onto the abutments or not, excessively higher stresses developed during the course of assembly trial and thereafter. On the marginal cortical bone around implants during the assembly, the peak tensile and compressive stresses were as high as 186.9MPa and 114.1MPa, respectively, even after the final sitting of the fixed prosthodontics (for d=17.8mm model). For this case, the area of marginal bone subject to compressive stresses above 55MPa, equivalent of the $4,000{\mu}{\varepsilon}$, i.e. the reported threshold strain to inhibit physiological remodeling of human cortical bone, extended up to 2mm away from implant during the assembly. Horizontal misfit of 0.1mm can produce excessively high stresses on the marginal cortical bone not only during the fixed prosthodontics assembly but also thereafter.

• Journal of dental hygiene science
• /
• v.15 no.2
• /
• pp.106-112
• /
• 2015

This study was conducted to provide with baseline data with the purpose of increasing the values of medical services. Self-administered questionnaire survey was conducted on 236 patients at a dental clinic follow-up visit in dentist clinic Gyeongnam area from June 2013 to August 2013. All statistical analyses were performed using SPSS. The motivation visiting the dental clinic is that the first one is introduction from the family and friends, the second is accessibility, the third is conspicuity and the last one is awareness of the dentist. The main variables in the process of treatment are service system, kindness, satisfaction of service, efficient of re-call system. The relief of discomfort at revisit show the highest score in the process of implant treatment and intention of revisit hereafter do in the prostheses process. In the correlation between main variables, service system and relief of discomfort at revisit (r=0.440, p<0.001), kindness and satisfaction of medical service (r=0.675, p<0.001), revisit hereafter and satisfaction of service (r=0.387, p<0.001) and efficiency of re-call system and revisit showed the highest correlation. The influence on satisfaction of dental service show meaningful level in kindness (p<0.001) and efficiency of re-call system (p<0.05). The intention of revisit is affected meaningfully by relief of uncomfort (p<0.05), service system (p<0.05), kindness (p<0.01) and efficiency of re-call system (p<0.01). In summary, the personal network of patients is most important variable at intention for revisit of dental clinic. As satisfaction of kindness and efficiency of re-call system is higher, satisfaction of medical service and intention for revisit are shown higher. Therefore further research for improvement of satisfaction for medical service and of intention of revisit at the dental clinic should be carried out.

• Cartoon and Animation Studies
• /
• s.41
• /
• pp.279-306
• /
• 2015

This paper is a study of the changing nature of software for virtual Cyborg self and the virtual body that occur in the game from a philosophical point of view. Looking broadly, the cyborg concept refers to the combination of man and machine. Specifically, there is a hardware cyborg organism to combine human and restoration of machine In addition, there is software cyborg by electronic the human brain of converting a virtual body. Virtual games are cases software-Cyborg applied. In the game , There seems to have characteristics of virtual body and ego that different from general cyborg meaning. To analyze the features, I applied the concept of software-cyborg of Hans morabek and the multiple selves in cyberspace properties of Kim Sun-Hee. generally, software cyborg cloning the brain type tended to invalidate the body due to the nature of the virtual world. But If you look at third-person's view and the game character that made from real actors, it is pursuing the realism of photographic images and it stressed the need for a virtual body in order to maintain the psychological identity of the player. And, The game player crosses the eight characters to choose while completing the mission. This is a big role in the reality ego leads to the desired final ending with the selection and experience to be experienced as self-replication to multiple. These cyber multi-ego looks for an active and positive features compared to the multi-ego in the real world and highlights the advantages of the software cyborg. Game The characteristics of the final result varies depending on the selection of the player. The life and death of a friend is determined by the relationship between the characters friendship. In this case, the virtual self is empirically through trial and error, moral, and try to select the desired setting the standard for intuitive and self own choice. Also It can be fused to the knowledge of multiple selves as one step is formed by a high spiritual introspection. This process is a positive interpretation of the world and their own forms of mental reflection through self-overcoming human, Nietzsche is said that the process is Wibeomenswi.

• Journal of Technologic Dentistry
• /
• v.19 no.1
• /
• pp.175-184
• /
• 1997

The purpose of this study is to examine the effect of parents knowledge on oral health status toward their children. This study was carried out to investigate and analyze the congnitive degree of dental subjects and public who have an experience to be treated for their teeth on the dental knowledge, operative dentistry, and dental prothesis in the oral health care through the questionnaires. The results are as follows; 1. In questioning the fundamental knowledges, 47.6% of respondents in their thirties said that milk tooth of their children are number 20. Although schooling level of their parents is not rel evant to this survey, 21.9% who have only high-school diploma, said also "number 20". As a conclusion, most parents have a big concern in their children's teeth. 2. 44.0% parents answered, asked "who do decayed teeth sping up, and 26.4% said" It is why children eat sugary. Asked "What is efficient preventive measures decayed teeth", 26.5% said it is very relevant to be in the utilization of F-tooth-paste. 3. For children's good theeth, periodically brushing is the important. Most parents recognized brushing efficient. 4. In questioning the possession amount of decayed teeth, 45.8% have more than four. Usually those parents who have children filled their decayed teeth with artificial or installed with dental prosthesis. As a conclusion age is relevant in this study in P<0.05 level. 5. In asking for efficient starting-year of tooth brushing, 42.6% said that 2 or 3 year age is the most efficient, and especially 80.6% teath children to learn brushing themselves(P<0.05) 6. In surveying the way they obtained dental information, 38.9% were given from mass media, but 90% were once not delivered with the education of dental health. Because parents have been know narrow and deficient information of dental health mass media, experts in dental health have to deliver help their parents to be delivered with systematical dental information. The conclustion of this study can summarized that parent's role very important to their children's tooth health and the education program for systematical dental information should be delivered to their parents.

• Journal of Oral Medicine and Pain
• /
• v.30 no.2
• /
• pp.215-230
• /
• 2005

The study was intended to investigate how dentists in private dental clinic thought on the present claim and review of dental insurance to reflect it in future establishing dental insurance policies. 1,465 dentists who were running own dental clinic in Pusan Metropolitan City and the south part of Kyungsang province were surveyed in February, 2004. A total of 406 copies of finished questionnaire were finally retrieved and analyzed. The findings are as follows. 1. About insurance claim affairs : Most of the subject of insurance claim was by dentist himself or dental hygienist(nurse). Agency claiming was carried under 20% of total insurance claim. 2. The degree of attendance on insurance lecture : The degree of attendance on insurance lecture was relatively low. 3. Filing a protest against insurance claim : Filing a protest against insurance claim was reavealed about half-and-half for "have been" or "have not been". 4. Private clinic dentist,s opinion about the regulations affecting review of dental insurance : Private clinic dentists opinion about current guide for insurance review of dental fee was“the guidance is difficult and unfair cutback of claim fee may be carried”. 5. The affairs about health insurance review agency : About 70% of private clinic dentists have dissatisfaction on health insurance review agency. 6. Standpoint of private clinic dentists about issuance of receipt for dental fee : About 70% of private clinic dentist have an difficulty in issuance of receipt for dental fee. 7. The affairs about change insurance noncoverage treatment to insurance coverage treatment : Most of private clinic dentists hoped that insurance coverage about full mouth scaling, pit and fissure sealant, fluoride application. But they do not hoped that insurance coverage about geriatric denture, prothodontic treatment except precious metal, photopolymerization resin treatment.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.4
• /
• pp.389-403
• /
• 2008

In Angle's Class III malocclusion, which has higher incidence in Korean than Western, depressed midfacial profile with protruded lower lips and mandible may give rise to many functional, esthetic, psychological, social problems. Due to the different malocclusion incidence according to racial differences, many previous studies focused on the relationship between Class II malocclusion and nasal airway obstruction. Previous studies used lateral cephalography which has limitations of 2 dimensional image with projection error and identification error. Therefore, the purpose of this study was to analyze morphologic differences in the nasal airway between normal occlusion and Angle's Class III malocclusion patients using 3-dimensional facial computed tomography. Thirteen normal occlusion(7 men and 6 women) and sixteen skeletal Class III(7 men and 9 women) patients were selected and 3-dimensional facial computed tomography taking was performed. Comparison between two group in volume and sectional area of nasal airway were carried out. The results were followed. 1. In the comparison of absolute nasal airway volume, oropharyngeal space of experimental group were larger than control group but there are no significant difference in other. 2. In the comparison of relative nasal airway volume, oropharyngeal space of experimental group were larger than control group but there are no significant difference in other. 3. In the oropharyngeal space width on frontal and lateral view, the similar tendency was revealed between two groups. 4. In the lateral curvature of nasal airway, the similar tendency was revealed between two groups.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.2
• /
• pp.175-184
• /
• 2011

With a development of implant restoration technique, there are increasing use of computer-guided system for edentulous patients. It was carried out simulated operation based on CT information about patient's bone quantity, quality and anatomical landmark. However, there are some difference between the programmed implant and post-operative implant about it's position. If the deviation was severe, it could happen a failure of 'passive fit' and not suited for path of implant restoration. The aim of this presentation is to evaluate about a degree of deviations between programmed implant and post-operative implant. Five patients treated by 'NobelGuide' system (Nobel Biocare AB, G$\ddot{o}$teborg, Sweden) in Department of Prosthodontics, Inha University were included in this study. The patients were performed CT radiograph taking and intra-oral impression taking at pre-operation. Based on CT images and study model, surgical stent was produced by NobelBiocareTM. To fabricated a pre-operative study model, after connected lab analog to surgical template, accomplished a pre-operative model using type 4 dental stone. At final impression, a post-operative study model was fabricated in the conventional procedures. Each study model was performed CT radiograph taking. Based on CT images, each implant was simulated in three dimensional position using $Procera^{(R)}$ software (Procera Software Clinical Design Premium, version 1.5; Nobel Biocare AB). In 3D simulated model, length and angulation between each implant of both pre- and post-operative implants were measured and recorded about linear and angular deviation between pre-and post-operative implants. A total of 24 implants were included in this study and 58 inter-implant sites between each implant were measured about linear and angular deviations. In the linear deviation a mean deviation of 0.41 mm (range 0~1.7 mm) was reported. In the angular deviation, a mean deviation was $1.99^{\circ}$ (range $0^{\circ}{\sim}6.7^{\circ}$). It appears that the both linear and angular mean deviation value were well acceptable to application of computer-guided implant system.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.4
• /
• pp.337-349
• /
• 2008

Despite an improved bone reactions of Mg-incorporated implants in the animals, little yet has been carried out by the experimental investigations in functional loading conditions. This study investigated the clinical and histologic parameters of osseointegrated Mg-incorporated implants in delayed loading conditions. A total of 36 solid screw implants (diameter 3.75 mm, length 10mm) were placed in the mandibles of 6 beagle dogs. Test groups included 18 Mg-incorporated implants. Turned titanium Implants served as control. Gold crowns were inserted 3 months. Radiographic assessments and stabilitytests were performed at the time of fixture installation, $2^{nd}$ stage surgery, 1 and 3 months after loading. Histological observations and morphometrical measurements were also performed. Of 36 implants, 32 displayed no discernible mobility, corresponding to successful clinical function. There was no statistically significant difference between test implants and controls in marginal bone levels (p=0.413) and RFA values. The mean BIC % in the Mg-implants was $54.4{\pm}20.2%$. The mean BIC % in the turned implant was $48.9{\pm}8.0%$. These differences between the Mg-implant and control implant were not statistically significant (P=0.264). In the limitation of this study, bone-to-implant contact (BIC) and bone area of Mg-incorporated oxidized implant were similar to machine-turned implant. The stability analysis showed no significantly different ISQ values and marginal bone loss between two groups. Considering time-dependent bone responses of Mg-implant, it seems that Mg-implants enhanced bone responses in early loading conditions and osseointegrated similarly to cp Ti implants in delayed loading conditions. However, further investigations are necessary to obtain long-term bone response of the Mg-implant in human.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.4
• /
• pp.214-219
• /
• 2019

Purpose: The aim of this study was to evaluate the correlation between inter-condylar width and inter-maxillary first molar width to present the criteria for prosthetic reconstruction of dental arch width in maxillary and mandibular fully edentulous patients. Materials and Methods: 120 Koreans (60 males and 60 females) who underwent the cone beam computerized tomography (Cone-beam CT) were selected. The Cone-beam CT images were analysed using Invivo 5.1. After reorientation of axis, inter-maxillary first molar width was measured by clicking both mesio-buccal cusp tip of maxillary first molar. And inter-condylar width was measured by clicking both middle points of condyles. The collected data were analysed with SPSS Version 20.0 and statistical significance of the correlation between inter-condylar width and inter-maxillary first molar width was verified by Pearson's correlation analysis. Results: The mean inter-condylar width of Korean was 105.9 mm, and that of male (108.3 mm) was statistically significantly wider than the female (103.4 mm). The inter-maxillary first molar width of Korean was 57.1 mm, and that of male (57.9 mm) was statistically significantly wider than the female (56.2 mm). Pearson's correlation analysis between inter-condylar width and inter-maxillary first molar width showed a Pearson correlation coefficient of 0.614 and statistically significantly positive correlation. Conclusion: Intercondylar width and inter-maxillary first molar width showed positive correlation and the average ratio of inter-condylar with and inter-maxillary first molar width was 1:0.54. Based on the results of this limited study, inter-condylar width can be used as a guide for setting up dental arch width in fully edentulous patient.

• Korean Journal of Ecology and Environment
• /
• v.48 no.2
• /
• pp.95-107
• /
• 2015

In order to identify long-term trends of water quality parameters in Lake Kyeongpo, Mann-Kendall test, Sen's slope estimator and linear regression were applied on data, with 15 parameters from three different sites and rainfall, monitored once in every two months from March to November during 1998~2013. Seasonal variation analysis only used Mann-Kendall test and Sen's slope estimator. Analysis result showed that salinity, transparency and nutrient variables (total phosphorus, dissolved inorganic phosphorus, total nitrogen, nitrate nitrogen, ammonia nitrogen) were only parameters having statistically significant trend. In linear regression analysis, salinity (surface and bottom layer of all sites) and transparency (only at site 1), were figured out with statistically significant increasing trend, while in non-parametric statistical method, salinity and transparency in all sites (surface, middle, deep) were figured out with statistically significant increasing trend. Water quality parameters showing statistically significant decreasing trends were dissolved oxygen (surface layer of site 1 and bottom layer of sites 2 and 3), total phosphorus (sites 1 and 2), dissolved inorganic phosphorus, total nitrogen, nitrate nitrogen and ammonia nitrogen in the linear regression analysis and, dissolved oxygen (bottom layer of all sites), total phosphorus, dissolved inorganic phosphorus, total nitrogen, nitrate nitrogen and ammonia nitrogen in the non-parametric method. Seasonal trend analysis result showed that salinity, turbidity, transparency and suspended solids in spring, salinity, transparency, nitrate nitrogen and suspended solids in summer and temperature, salinity, transparency and suspended solids in fall were the variables depending on the season with increasing trends. In general, rainfall during the research period showed decreasing trend. The significant reduction trends of nutrients in Lake Kyeongpo were believed to be related to lagoon restoration and water management project run by Gangneung city and under-water wear removal, but further detailed studies are needed to know the exact causes.