• Journal of the Korean Orthopaedic Association
• /
• v.55 no.5
• /
• pp.444-449
• /
• 2020

An anterior cruciate ligament (ACL) avulsion fracture is an uncommon injury that occurs predominantly in the pediatric and adolescent population. Accurate reduction and fixation of an avulsed fragment are necessary to restore and maintain the length of the ACL and normal knee biomechanics. Several techniques are available to repair an ACL avulsion fracture. On the other hand, treatment is controversial in skeletally immature patients due to risk of physeal injury. This paper reports a case of an ACL avulsed fracture in a skeletally immature patient treated with arthroscopic all-inside suture bridge repair, in which an excellent result and firm stability were obtained without physeal injury.

• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.169-176
• /
• 2008

The purpose of this study was to evaluate the effect of thickness, filling methods and curing methods on the polymerization of dual cured core materials by means of microhardness test. Two dual cured core materials, MultiCore Flow (Ivoclar Vivadent AG, Schaan, Liechtenstein) and Bis-Core (Bisco Inc., Schaumburg, IL, USA) were used in this study. 2 mm (bulky filled), 4 mm (bulky filled), 6 mm (bulky and incrementally filled) and 8 mm (bulky and incrementally filled)-thickness specimens were prepared with light cure or self cure mode. After storage at $37^{\circ}C$ for 24 hours, the Knoop hardness values (KHN) of top and bottom surfaces were measured and the microhardness ratio of top and bottom surfaces was calculated. The data were analyzed using one-way ANOVA and Scheffe multiple comparison test, with ${\alpha}=0.05$. The effect of thickness on the polymerization of dual cured composites showed material specific results. In 2, 4 and 6 mm groups, the KHN of two materials were not affected by thickness. However, in 8 mm group of MultiCore Flow, the KHN of the bottom surface was lower than those of other groups (p < 0.05). The effect of filling methods on the polymerization of dual cured composites was different by their thickness or materials. In 6 mm thickness, there was no significant difference between bulk and incremental filling groups. In 8 mm thickness, Bis-Core showed no significant difference between groups. However, in MultiCore Flow, the microhardness ratio of bulk filling group was lower than that of incremental filling group (p < 0.05). The effect of curing methods on the polymerization of dual cured composites showed material specific results. In Bis-Core, the KHN of dual cured group were higher than those of self cured group at both surfaces (p < 0.05). However, in MultiCore Flow, the results were not similar at both surfaces. At the top surface, dual cured group showed higher KHN than that of self cured group (p < 0.05). However, in the bottom surface, dual cured group showed lower value than that of self cured group (p < 0.05).

• Journal of Conservation Science
• /
• v.33 no.6
• /
• pp.467-483
• /
• 2017

In this study, the degradation properties by temperature stress of $Araldite^{(R)}$ rapid-curing epoxy resin used for inorganic cultural heritages, was identified. The tensile and tensile shear strength of durability decreased for 12,624 hours at temperatures of $40{\sim}60^{\circ}C$. In terms of stability of external stress and temperature, the slow-curing epoxy was superior to the rapid-curing epoxy, and cultural heritage conservation plans should therefore consider the strength and stress properties of restoration materials. Color differences increased for 12,624 hours at temperatures of $40{\sim}60^{\circ}C$, and glossiness decreased. Both color and gloss stability were weak, which necessitates the improvement of optical properties. Thermal properties (weight loss, decomposition temperature, and glass transition temperature) of adhesives are linked to mechanical properties. Interfacial properties of the adherend and water vapor transmission rates of adhesives are linked to performance variation. For porous media (ceramics, brick, and stone), isothermal and isohumid environments are important. For outdoor artifacts on display in museums, changes in physical properties by exposure to varying environmental conditions need to be minimized. These results can be used as baseline data in the study of the degradation velocity and lifetime prediction of rapid-curing epoxy resin for the restoration of cultural heritages.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.16 no.2
• /
• pp.13-24
• /
• 2006

We consider a privacy-preserving cooperative computation protocol evaluating a beneficial function of all participants' secret inputs, such that each party finally holds a share of the function output. We propose a practical privacy-preserving cooperative computation protocol for solving the linear system of equations problem md the linear least-squares problem. Solutions to these problems are widely used in many areas such as banking, manufacturing, and telecommunications. Our multi-party protocol is an efficiently extended version of the previous two-party model.

• Journal of Conservation Science
• /
• v.29 no.4
• /
• pp.297-309
• /
• 2013

Iron objects become corroded at fast speed from the moment when they are excavated, so it is needed to control corrosion through processes of conservation treatment. However, re-corrosion mostly takes place in excavate iron objects, although they have already gone through the process of conservation treatment, and it is more difficult to carry out the second conservation treatment of re-corroded excavated iron objects than the first conservation treatment, and it requires a longer period of time to treat them as well. In this study, aims to discover factors of re-corrosion by scientifically analyzing corrosion products generated during the process of storage after the process of conservation treatment. The finished on conservation treatment of the iron artifacts, which were unearthed from three ancient site in Gyeongju by using the same conservation method between 2002 and 2009, re-corrosion condition observed on the packaging-iron artifacts. Focused on 9 target forged iron artifacts among them, this study analyzed the physical changes by mass measurement, naked-eye and microscopic observations and the chemical changes by SEM-EDS, XRD, IC and ICP analysis. The results show that the yellowish brown corrosion products formed on the facing surface of part dropped from the artifacts had different associated forms but acicular shape. In addition, the acicular shape became clearer as the color changed from red to yellowish brown. According to the process when the conservation treatment was completed, the mass of the artifacts increased in proportion to the corrosion products and the chloride ion ($Cl^-$) concentration had a tendency to increase relatively. ${\beta}$-FeOOH (akaganeite) was confirmed in the XRD analysis for the corrosion products of all the collected samples. As a result of ICP analysis, $Na^+$ and $Ca^{2+}$ components were confirmed.

• Korean Journal of Heritage: History & Science
• /
• v.43 no.3
• /
• pp.4-25
• /
• 2010

This study was carried out on scientific conservation treatment based on material characteristics, provenance interpretation, and deterioration diagnosis for seven-storied Jungwon Tappyeongri stone pagoda in Chungju. As a result, main rock of the pagoda is biotite granite with magnetite-series (average $5.86{\times}10^{-3}$ SI unit), containing partly basic xenolith, pegmatite veinlet and feldspar phenocryst. As a result of the provenance presumption of the host rock, a rock around the Songgang stream was identified the same origin. Therefore the rock is appropriate for materials of the pagoda restoration. The deterioration assessment suggested that the pagoda was seriously exfoliated (2.7 to 5.5%), discolored (39.8 to 58.9), and contaminated with repair materials (3.5 to 9.4%), and bioorganisms (19.3 to 24.4%). Accordingly, conservation treatment was carried out based on preliminary investigation for stable conservation of the pagoda. Overall processes were sequentially proceeded by restoration of the replacement stone, cleaning, joining and consolidation. This study sets up an integrated conservation system from preliminary investigation to conservation treatment of the pagoda. Also, the study will contribute for establishing the future-oriented customized conservation treatment.

• Conservation Science in Museum
• /
• v.16
• /
• pp.14-31
• /
• 2015

Sword with round pommel discovered in tomb No.39 in the Jisandong tumuli group (M310) is a large sword with a looped pommel enclosing a sculpted dragon head. The sword was produced using different techniques; gold decoration, plating, openwork carving and hammering by using gold and silver. This sword treated conservation work because it has deformation and damages of handle decoration, missing part of sword, and corrosion. Conservation treatment was that foreign material and corroded metal were removed from the surface, and performed to stabilize and reinforce the weakened metal. During the conservation treatment, the object was examined to understand its materials and production method. The result of research, the dragon head inside the looped, amalgam-plated pommel has surface gold decorations. The pommel has a thin gold plate placed over a bottom plate made of copper, which was hammered to create an embossed design. The silver plate-covered hilt, cylindrical in shape, has an openwork lattice design. The steel blade is single-edged. Finally, the locket of the sheath has an embossed design also created through hammering on a thin gold plate placed over the copper bottom plate.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.3
• /
• pp.589-598
• /
• 2019

The amount of digital data a is explosively growing, and these data have large potential values. Countries and companies are creating various added values from vast amounts of data, and are making a lot of investments in data analysis techniques. The privacy problem that occurs in data analysis is a major factor that hinders data utilization. Recently, as privacy violation attacks on neural network models have been proposed. researches on artificial neural network technology that preserves privacy is required. Therefore, various privacy preserving artificial neural network technologies have been studied in the field of differential privacy that ensures strict privacy. However, there are problems that the balance between the accuracy of the neural network model and the privacy budget is not appropriate. In this paper, we study differential privacy techniques that preserve the performance of a model within a given privacy budget and is resistant to model inversion attacks. Also, we analyze the resistance of model inversion attack according to privacy preservation strength.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.5
• /
• pp.849-853
• /
• 2000

This study was examined for antibacterial effect of various molecular weight of chitosan against spoilage bacteria in emulsion sausage. Four different kinds of chitosan, molecular weights (M.W.) of 1 kDa, 5 kDa, 30 kDa and 120 kDa, wee used. The more molecular weight of chitosan is high, the more storage property of sausage is good during storage at $30^{\circ}C$. Storage properties of sausages between added 0.5% of M.W. 120 kDa chitosan and 150 ppm of sodium nitrite were about the same. Effect of growth-inhibitory of spoilage bacteria was not detected 0.2% of M.W. 1kDa chitosan 0.2% of M.W. 5kDa chitosan have growth-inhibitory effect over 80% against only 3 strains among bacteria isolated from spoiled emulsion sausage. But, 0.2% of M.W. 30 kDa chitosan have growth-inhibitory effect of 80% against all strains of bacteria related to spoilage of emulsion sausage, except S. typhimurium, Especially, 0.2% of M.W. 120 kDa chitosan inhibited over 80% growth against all strains used in this study. The antibacterial activity was increased with their molecular weight.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1997.05a
• /
• pp.59-61
• /
• 1997

무토양재배시스템은 가급적 경량화이면서 집약적인 형태를 가지며, 환경보존차원을 위하여 밀폐형 순환식 재배시스템이 중시되고 있다. 무토양재배시스템은 DFT에서 NFT나 고형배지로 갈수록 외기의 환경변화에 대하여 비교적 근권부근의 환경변화가 크기 때문에 노출되어 있는 뿌리에 영향을 미치는 것으로 사료된다. (중략)