• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.3
• /
• pp.20-28
• /
• 2007

The easiest way to see the phenomena of compressor surge is to show the static and dynamic operation characteristic on the map. Its operation zone will be restricted by the surge limit and, static and transient process must have some margin for it. Effect of rotor moment of inertia, air/gas volumes and heat transfer are factors to cause the transition from the static line. In case a large volume such as heat exchanger exists in the system it will exert a substantial influence to dynamic characteristics. In the present paper, influence of air volume bled from the compressor exit on transient process is investigated with an example of an auxiliary power unit micro-turbine engine. Turbine mass, pressure ratio, rotation speed, power and moment are calculated based on mass and work conservation. Result from the present study can give guidance to design the control system. A computer program is developed to calculate the dynamic process using the MathCAD commercial software.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.41 no.1
• /
• pp.33-47
• /
• 2004

조선기자재는 선박의 건조 및 수리에 사용되는 모든 기계와 자재류를 일컫는 것으로, 선종과 규모에 따라 다소 차이가 있으나 약460여종에 이르며 선박 건조원가의 55∼65%를 차지하고 있다. 선박부품인 조선기자재는 기능별로 나누어 금속제품, 화학제품, 용접재료, 주단제품으로 구성되는 선체부, 엔진을 포함하는 추진장치와 보조기계로 대별되는 기관부, 조타, 계선, 하역, 안전장비 및 거주설비 등의 의장부 및 동력, 배선, 조명, 항해통신, 제어장치 등으로 구성되는 전기ㆍ전자부로 분류된다. 특히 최근에는 방화ㆍ방재 설비로 대표되는 안전설비를 의장부에서 별도로 분류하기도 하며, 선박의 자동화 추세에 따라 전기와 전자부분을 분리하여 분류하기도 한다.(중략)

• KIPE Magazine
• /
• v.14 no.5
• /
• pp.36-41
• /
• 2009

전기철도차량에는 대용량 추진제어 컨버터/인버터부터 소용량 스위칭 모드 전원장치에 이르기까지 철도차량의 운행에 필요한 각종 동력 및 전력을 공급하기 위한 여러 가지 형태의 전력변환장치가 사용되고 있다. 그 중 가장 대표적인 전력변환장치가 추진제어인버터와 보조전원장치이다. 전기철도차량의 성능평가는 전력변환장치의 성능평가라 할 수 있을 정도로 많은 비중을 전력변환장치가 차지하고 있다. 한국철도기술연구원은 국토해양부로부터 지정받은 성능시험기관으로서 국내 도시철도 및 철도차량의 성능평가를 수행하고 있다. 성능시험은 차량의 제작공정에 따라 부품시험, 구성품시험, 완성차시험, 예비주행 및 본선시운전의 각 단계별로 실시하고 그 시험기준으로 도시철도차량의 성능시험에관한기준 및 철도차량성능시험 시행지침이 적용된다. 성능시험기준을 근간으로 추진제어인버터와 보조전원장치의 성능시험 대한 시험항목과 시험방법에 대하여 소개한다.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.136-137
• /
• 2012

본 논문에서는 하이브리드 전기자동차의 전장시스템 에너지 공급을 위한 보조배터리 충전용 저전압 직류 변환장치(Low voltage DC-to-DC Converter, LDC)를 제안한다. 차량 탑재용의 특성상 소형 경량화 설계 기술을 통한 연비증가, 동력성능의 향상이 매우 중요하다. 본 논문에서 제안하는 LDC는 부스트와 포워드 컨버터 구조를 혼합한 형태로 부스트 컨버터의 입력 인덕터를 변압기로 대체하여 포워드 컨버터와 결합시킴으로서 출력전압의 승 강압 동작을 구현한다. 따라서 차량 시동 시 내연기관을 구동하기 위한 승압모드로 동작하고, 그 외 일반적인 경우는 차량 내 각종 전장부하에 전력을 공급하기 위한 강압모드로 동작된다. 제안된 컨버터의 동작 모드에 따른 이론적 분석을 시행하고 PSIM을 이용한 시뮬레이션을 통해 타당성을 검증한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.774-780
• /
• 2021

The auxiliary power unit (APU) of a rotorcraft starts the engine during operation/flying. The APU is composed of a gas turbine engine type. The starting principle of the component is that the electric start motor generates the power required for starting by rotating the shaft. In this study, quality improvement was performed by applying an over-running clutch (ORC) between the APU and the starter motor to secure the operability of the starter motor of the APU mounted on the rotorcraft. The starter motor has the main role of starting the APU, but during operation, it is rotated without load by the rotational force of the APU gear shaft, resulting in friction at the brush. This phenomenon causes abrasion of the brush of the starter motor. Consequently, when the APU operation time increases, the brush life decreases, and the operability of the APU is affected. In this study, an ORC that separates the interlocking between the start motor brush abrasion and the APU operation time was applied to improve the operability/durability of the APU starter motor. The effect was verified through a test, and the technical feasibility of the design change was analyzed.

• Journal of Korea Technology Innovation Society
• /
• v.13 no.3
• /
• pp.538-557
• /
• 2010

Korean Government has supplied small-medium enterprises with various technology financing programs such as R&D grant." loans, equities, guarantees since 1980's. The purpose of this study is to render policy suggestions for policy makers by analysing problems with regard to regulations. The suggestions of this study are such as the following. First, the current three months of the fund formation period should be extended within six months for general partners to have enough time to raise funds in the current tough capital market situation. Second, the government's non priority loss devotion system should keep going to prevent general partner's moral hazard. Third, in order to fulfill the policy purpose that is to create globally well-known companies, the government investment ratio should scale up from the current 20% to 30% of the total fund size in that the stable capital supply for core technology commercialization, industrialization and globalization of companies is achieved. Finally, general partners of the New Growth Engine Fund should showoff their investment abilities to the potential investors such as institutional investors by accumulating all track records and know-hows that prove their specialities and implementing action plans to achieve the best result of their investment. This study provides general considerations of the selection procedure, the government investment ratio, the government priority loss devotion system and so on when formating the public funds.

• The Korean Journal of Archival Studies
• /
• no.55
• /
• pp.39-71
• /
• 2018

The purpose of this study is to examine the reality of the records management of the National Assembly members and suggest a desirable alternative. Until the Public Records Management Act was enacted in 1999, the level of the records management in the National Assembly was not beyond that of the document management in both the administration and the legislature. Rather, the National Assembly has maintained a records management tradition that systematically manages the minutes and bills since the Constitutional Assembly. After the Act was legislated in 2000, the National Assembly Records Management Regulation was enacted and enforced, and the Archives was established in the form of a subsidiary organ of the Secretariat of the National Assembly, even though its establishment is not obligatory. In addition, for the first time, an archivist was assigned as a records and archives researcher in Korea, whose role is to respond quickly in accordance with the records schedule of the National Assembly, making its service faster than that of the administration. However, the power of the records management of the National Assembly Archives at the time of the Secretariat of the National Assembly was greatly reduced, so the revision of the regulations in accordance with the revised Act in 2007 was not completed until 2011. In the case of the National Assembly, the direct influence of the executive branch was insignificant. As the National Assembly had little direct influence on the administration, it had little positive influence on records management innovation under Roh Moo-Hyun Administration. Even within the National Assembly, the records management observed by its members is insignificant both in practice and in theory. As the National Assembly members are excluded from the Act, there is no legal basis to enforce a records management method upon them. In this study, we analyze the records management problem of the National Assembly members, which mainly concerns the National Assembly records management plan established in the National Archives. Moreover, this study proposes three kinds of records management methods for the National Assembly members, namely, the legislation and revision of regulations, the records management consulting of the National Assembly members, and the transfer of the dataset of administrative information systems and websites.

• Journal of the Korean Geographical Society
• /
• v.39 no.4
• /
• pp.643-664
• /
• 2004

This study aims to review what geographers have contributed to GIS industries and national needs. To-be-geographers and geographers are expected to meet the gap between what we have teamed in school and what we have to do after graduation. The characteristics of GIS industry in the 1990 are summarized with approximate evaluation of the contribution of geographers in each stage. Author introduced the requirement for the licenses of geomatics and geospatial engineering experts and the other licenses, which are important to get a job in GIS industry from 2003 to 2004. A set of questionnaire on the user's requirements was given to GIS people in private companies and public GIS research centers and analyzed. Author found that they put an emphasis on hands-on experiences and programming skills. no advantages or geography such as capability or integration and inter-disciplinary collaboration were not appreciated. The prospects for the GIS tend to be positive but the reflectance of the prospect was not accompanied by at the same degree of preference for geography. Most government strategies for the next ten years' GIS focus on new-growth leading industries. SWOT(strength, weakness, opportunity, threat) analysis of geography for GIS industry will give some directions such as telematics, regional marketing strategies with web-based GIS technology, location based service. That means intra-disciplinary study in geography will evoke the potentiality of GIS, compared with interdisciplinary studies.