• Composites Research
• /
• v.16 no.6
• /
• pp.10-15
• /
• 2003

In RTM process, the content of microvoids can be critical due to the fact that the presence of microvoids degrades mechanical properties on the fabricated composite parts. The present paper proposes an experimental method of observation in void formation and transport. VARTM processes are performed under observation with a digital video camera and then the microvoid formation in the flow front and transport are videotaped and observed both in channels and tows. The obtained data are used in the mathematical model in order to determine the model constants. Experimental results and expected results from the mathematical model show a good agreement with each other.

• Journal of the Korean housing association
• /
• v.21 no.6
• /
• pp.131-141
• /
• 2010

This study is aimed to grasp the spatial characteristics exhibited in the modern housing architecture from the aspect of a geometrical manipulation, which transforms basic geometrical shapes and persue the formative diversity, to identify and verify the various characteristics of spatial structure in modern housing architecture. In this regard, this paper analyze and identify the influences of the void spaces that are created by geometrical manipulations on housing architecture, in terms of morphological and environmental aspects. Theoretical approaches define the concept of geometrical manipulation according to the characteristics of residence and examine the spatial features of void spaces. Additionally, case studies result in the classification of void spaces that are created by geometrical manipulation. Furthermore, to understand environment-friendly characteristics of the void space, the researcher elicited the factors that can affect environment friendly housing from previous studies, and analyzed their correlation between those factors and the void spaces that are classified.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.05a
• /
• pp.35-40
• /
• 2006

최근 전기에너지의 사용비율은 해가 거듭될수록 증가되고 있으며, 경량화 소형화로 인한 전력기기의 스트레스가 증가되었다. 또한 고압송전으로 인해 전기적 사고는 대형사고를 유발하므로 전력기기의 수명예측은 매우 중요한 과제이다. 이에 본 논문에서는 XLPE 절연체의 보이드 유무에 따른 부분방전 패턴을 K-means 분포통계함수를 이용하여 부분방전 패턴의 그룹화를 시도하였다. 또한 전하량과 방전빈도수의 분포를 비교하기 위해 위상-전하랑 및 위상-전하량-빈도수에 의한 그룹의 centroid 이동 변화에 대하여 조사하였다. 그 결과 보이드가 존재하는 경우 전하량의 높은 점에서 중심점을 형성하였고, 방전발생위상의 차이는 크지 않았다. 또한 위상-전하량의 클러스터보다 위상-전하량-빈도수의 클러스터에서 객체간 편차가 더 커짐을 발견하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.6
• /
• pp.35-42
• /
• 2000

In this paper, AE(Acoustic Emission) signals detected from the growth of the electrical tree in an epoxy resin under ac high-voltage application were analysed to diagnose the insulation deterioration of cast-resin power transformer. Frequency spectra of AE signals generated from the magnetizing and the load currents in the actual operating cast-resin power transformer of 500[kVA] under distribution system of 22.9[kV] were also analysed to distinguish the AE signals due to void discharges from the magnetic circuit noises in the core of the transformer. As the experimental results, we could distinguish the AE signals whether those signals were caused due to the void discharges or due to the magnetic circuit noises by analyzing the frequency spectrum of AE signals. The frequency spectra of AE signals generated from the cast-resin power transformer in operation due to both the magnetizing and the load currents appeared in the range of 40-120[kHz], but the frequency band of AE signals emitted from the void discharges in an epoxy resin sample was about 50[kHz] to 230[kHz].

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.2
• /
• pp.189-197
• /
• 2016

Mobile ad-hoc networks (MANETs) experience frequent link disconnections due to non-uniform node distribution and mobility. Thus, end-to-end path establishment-based routing protocols cause frequent transmission failures in MANETs, resulting in heavy control messages for path reestablishment. While location-based MANET routing protocols, such as Greedy Perimeter Stateless Routing (GPSR), use location information to forward messages in a hop-by-hop routing fashion without an end-to-end path establishment procedure, such protocols encounter communication void problems when message forwarding to the next hop fails due to the absence of a relay node. Therefore, to solve this problem, this paper proposes a Delay Tolerant-GPSR (DT-GPSR) protocol, which combines Delay Tolerant Networking (DTN) technology with the GPSR protocol. The performance of DT-GPSR is compared with the performances of the original GPSR and PRoPHET routing protocols through simulation using NS-2. The simulation results confirm that DT-GPSR outperforms GPSR and PRoPHET in terms of the message delivery ratio and message delivery delay.

• Journal of the Korean Institute of Gas
• /
• v.2 no.4
• /
• pp.53-59
• /
• 1998

Flow pattern of air-water two phase flow depends on the conditions of pressure drop, void fraction, and channel geometry. Drag reduction in the two phase flow can be applied to the transport of crude oil, phase change systems such as chemical reactor, pool and boiling flow, and to present cavitation which occurs in pump impellers. But the research on drag reduction in two phase flow is not intensively investigated. Therefore, experimental investigations have been carried out to analyze the drag reduction produced and void fraction by Co-polymer(A611p) addition in the two phase flow system. We find that the maximum point position of local void friction moves from the wall of the pipe to the center of the pipe when polymer concentration increases. Also we find that the polymer solution changes the characteristics of the two phase flow. And then we predict that it is closely related with the drag reduction.

• Journal of the Korea Society for Simulation
• /
• v.18 no.4
• /
• pp.49-58
• /
• 2009

Top-down approach in the intelligent robot research has focused on the single object intelligence however, it has two weaknesses. One is that has a high cost and a long spending time of sensing, calculating and communications. The other is the difficulty of responding to react changes in the unpredictable environment. we propose the collective intelligence algorithm based on Bottom-up approach for improving these weaknesses and the applied agent model and verify by simulation. The Modified Flocking Algorithm proposed in this research is the algorithm which is modified version of the concept of the Flocking (Craig Reynolds) which is used to model the flocks, herds, and schools in the graphics or games, and simplified the operation of conventional Flocking algorithm to make it easy to apply for the number of group robots. We modeled the Boid agent and verified possibility collectivization of the Modified Flocking Algorithm by simulation. And We validated by the actual multiple mobile robot experiment.

• The KIPS Transactions:PartD
• /
• v.16D no.4
• /
• pp.475-486
• /
• 2009

Data cube plays an important role in multi-dimensional, multi-level data analysis. Meeting on-line analysis requirements of data stream, several cube structures have been proposed for OLAP on data stream, such as stream cube, flowcube, S-cube. Since it is costly to construct data cube and execute ad-hoc OLAP queries, more research works should be done considering efficient data structure, query method and algorithms. Stream cube uses H-cubing to compute selected cuboids and store the computed cells in an H-tree, which form the cuboids along popular-path. However, the H-tree layoutis disorderly and H-cubing method relies too much on popular path.In this paper, first, we propose $H^*$-tree, an improved data structure, which makes the retrieval operation in tree structure more efficient. Second, we propose an improved cubing method, $H^*$-cubing, with respect to computing the cuboids that cannot be retrieved along popular-path when an ad-hoc OLAP query is executed. $H^*$-tree construction and $H^*$-cubing algorithms are given. Performance study turns out that during the construction step, $H^*$-tree outperforms H-tree with a more desirable trade-off between time and memory usage, and $H^*$-cubing is better adapted to ad-hoc OLAP querieswith respect to the factors such as time and memory space.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1888-1890
• /
• 2003

본 논문에서는 XLPE 고체 절연체내의 부분방전(partical discharge:PD)발생 및 진전에 따른 라 방사되는 UHF 대역의 방사전자파를 측정, 분석하고 PD진전에 따른 그 스펙트럼의 특성을 연구 하였다. PD를 모의하기 위해 침을 XLPE 절연체내에 삽입하고 그 사이에 보이드층을 만들었다. 고체절연체의 열화를 고려하여 일정시간 동안 일정 전압을 유지하고 이때 발생되는 방사전자파를 EMI, EMC 안테나(EMCO-3142)와 Spectrum analyzer로 측정, 분석하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.8A
• /
• pp.791-800
• /
• 2010

Recently wireless sensor networks as a field of ubiquitous computing technology was in the limelight. To use and collect the necessary information, Sink node mobility is essential. TTDD(Two-Tier Data Dissemination) proposed most common technique associated with Mobile sink node in wireless sensor networks, but issues exist that the use of many control packet falls into the energy efficiency. The technique for solving problems is Cluster-Based Energy-efficient Routing protocol (CBPER). But CBPER does not transmit the data correctly to sink node or source node. In this paper, we propose An Energy-Efficient Routing Protocol based on Static Grid using mobile sink nodes in order to solve the data transmission failure and reduce the energy consumption in Wireless Sensor Networks. We have evaluated it with the NS-2 simulator. Our results show that the proposed protocol saves the energy consumption up to 34% in comparison with CBPER. We also prove that the proposed protocol can transmit more accurate data to the sink de than CBPER.