• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.1
• /
• pp.53-61
• /
• 2011

Edge notched A16061-T6 aluminum was repaired with a GFRP composite patch as a function of the number of stacking, Damage progress of specimen for tension load has been monitored by acoustic emission(AE), AE energy rate, hit rate, amplitude, waveform and 1st peak frequency distribution were analyzed. Fracture processes were classified into Al cracking, Fiber breakage, Resin cracking and Delamination. Displacement of a specimen can be divided into Region I, II and ill according to acoustic emission characteristics. Region II where the patch itself was actually fractured was focused on to clarify the AE characteristics difference for the number of stacking.

• Journal of the Korean Institute of Gas
• /
• v.20 no.5
• /
• pp.96-103
• /
• 2016

Proper repair methods of damaged city gas pipeline is important factor to safely transmit gas and to reduce economical loss caused by failure of gas pipelines. Repair methods such as surfacing, type-A and type-B welding and composite sleeve method have been used to repair damaged city gas pipelines. In this paper, among repair methods, composite sleeve repair methods were conducted since they are rather simple processes and their repair quality is not sensitive to workers' ability compared with other repair methods. We discussed composite repair processes especially using carbon fiber prepregs and the experimental results.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.3
• /
• pp.153-159
• /
• 2018

Many researches have been carried out on carbonation, a representative deterioration in underground structure. The carbonation of RC (Reinforced Concrete) structure can cause steel corrosion through pH drop in concrete pore water. However extension of service life in RC structures can be obtained through simple surface protection. Unlike the conventional deterministic maintenance technique, probabilistic technique can consider a variation of service life but it deals with only normal distributions. In the work, life time-probability distributions considering not only normal but also log distributions are induced, and repair cost estimation technique is proposed based on the induced model. The proposed technique can evaluate the repair cost through probabilistic manner regardless of normal or log distribution from initial service life and extended service life with repair. When the extended service life through repair has log distribution, repair cost is effectively reduced. The more reasonable maintenance strategy can be set up though actual determination of life-probability distribution based on long term tests and field investigations.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.6
• /
• pp.176-181
• /
• 2018

Concrete structures are degraded physically and chemically due to various reasons after construction. Because the deterioration of concrete structure reduces the service life, reasonable repair and maintenance techniques are needed. Recently, in order to efficiently repair concrete structures, many researches on hybrid repair materials having improved adhesion performance have been carried out actively. In this study, we developed a hybrid repair material containing rapid hardening cement, PVA powder, nylon fiber, and latex to improve adhesion and water-tightness of existing concrete. The compressive strength, drying shrinkage and the adhesion strength test were carried out to evaluate the performance of the repair material. In addition, the flexure bond performance was evaluated before and after repair. From the results, the bending strength was 110% ~ 150% in all specimens except for the specimen containing only the rapid hardening cement, and all the specimens behaved with the existing concrete in the crack pattern generated by the bending strength.

• Journal of Conservation Science
• /
• v.32 no.4
• /
• pp.561-570
• /
• 2016

This research was a technical case study for the authentic restoration of the seven-storied Simgoksa stone pagoda after disassembly and reconstruction using three-dimensional image analysis. During disassembly and reconstruction, the pagoda's properties were analyzed in terms of the overall modification and displacement of the pagoda. Distortion was minimized by ensuring structural stability during the reconstruction process. Also, the original site of the pagoda was examined in order to utilize it fully during rebuilding. Before reconstruction of the pagoda, moss and lichen on the stone surfaces were removed by scientific surface cleaning. The foundation of the pagoda was reinforced with rammed earth than was similar to the original foundation using a mixture of soil and quicklime. The results are expected to provide valuable data for the reconstruction of other stone pagodas.

• Resources Recycling
• /
• v.29 no.1
• /
• pp.53-61
• /
• 2020

This study aimed to develop a foam concrete material for a ground repair system that has low strength and low fluidity by using an eco-friendly binder, which substitutes industrial by-products for more than 90% of cement. Basic properties were evaluated after substituting a small amount of calcium sulfo aluminate (CSA) for the binder to improve the sinking depth rate and volume change, commonly found when it had a large amount of industrial by-products. The substitution rates of CSA for the eco-friendly binder used for the foam concrete were 2.5, 5, and 10%. Fresh properties, hardened properties, pore structure, and hydrates were analyzed. Experimental results showed that using only 2.5% of CSA could improve the deep sinking depth which occurred when using an eco-friendly binder. As a result, the weight difference between the upper, middle, and lower parts of cast specimens was improved even after being hardened. The addition of CSA also contributed to the formation of small, uniformly sized closed pores and improved initial strength. However, when the proportion of CSA increased, the long-term strength decreased. However, it satisfied the target strength when 5% or less of CSA was used. The results of this study revealed that it was possible to manufacture foam concrete with low strength and high fluidity for repairing ground satisfying target qualities by adding 2.5% of CSA to the eco-friendly binder containing a large amount of industrial by-products.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.01a
• /
• pp.35-38
• /
• 2014

디지털 문화재 콘텐츠는 현실에서 체험하기 힘든 문화재를 디지털 기술의 특성을 이용하여 사용자의 경험을 극대화할 수 있고, 문화재 보수, 교육 등에 활용될 수 있다. 그런데 기존의 디지털 건축물 문화재는 실재 문화재의 구조 및 구성을 무시하고 외형만 만들어져 있어서 다양한 형태로 바꾸어 활용하기 곤란하며, 디지털 건축물 문화재 자체가 가상공간에 존재하여 현실체험에 제한을 받고 있다. 본 논문은 사용자가 현실공간에서 부재 미니어처를 이용하여 미니어처 문화재를 조립하고 그 결과를 가상공간의 디지털 문화재로 연결하여 다양한 체험을 제공하는 시스템에 관한 것이다. 이로서 현실 체험과 가상 체험이 연결되어, 보다 효과적인 체험이 가능하고 건축 문화재에 대한 보다 전문적인 학습이 가능하게 된다.

• Journal of Digital Convergence
• /
• v.19 no.8
• /
• pp.141-149
• /
• 2021

This study investigated the effect of accounting information on dividend policy as a measure of corporate conservatism from the perspective of the internal accounting management system. The verification is based on a sample of 543 companies listed on securities (excluding KOSDAQ and financial industry) among the Bank of Korea (2019) 「2018 Corporate Management Analysis」 and company analysis of the Korea Productivity Center (financial data disclosed as listed companies as a December settlement company) was composed. Using SPSS 22, empirical analysis was conducted using exploratory factor analysis and regression analysis. The first is the verification related to corporate conservatism and the role of dividend policy, and it is verification of whether internal accounting management influences financial decision-making. Second, if internal accounting management exists, it is a verification of how conservatism and investment policies (in-house reserve, debt borrowing, capital increase, dividends, etc.) affect the corporate value according to accounting information. As a result, from the perspective of the internal accounting management system, it was found that among the variables of accounting information, profitability can have a positive effect on corporate conservatism and dividend policy as a corporate valuation method of reinvestment. In addition, it has been proven that corporate conservatism has an effect on profitability-to-value through capital accumulation and reinvestment such as surplus and internal reserves. In the future, we will study and discuss the complementarity of corporate conservatism and dividend policy in relation to governance structure and improvement of the internal accounting management system.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.05a
• /
• pp.167-172
• /
• 2002

During the operation of military aircraft, maintenance is divided into organizational, intermediate and depot maintenance. In the depot maintenance, after removal of major parts and removable doors, damage assessment is performed. Locating damage, charactering the damage and determining its extent, zoning the damage on the part being repaired and re-evaluation of the damaged area after damage removal. Repair joints are classified by bonded joints and bolted joints, depending on joining material. In this paper, repair method in aging aircraft is investigated and the possibility of application of copmposite patch is surveyed.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10b
• /
• pp.632-634
• /
• 1998

기존의 객체기술은 재사용성과 유지보수 측면에서 많은 문제를 안고 있다. 해결책으로 여러 가지가 제시되었으나 그 중 객체지향 프레임웍을 기반으로 하여 시스템의 복잡도와 급증하는 크기 그리고 개방형 시스템의 구축 시에 발생하는 여러 가지 난제를 해결하고자 하였다. 그러나 프레임웍 연구는, 대부분 컴포넌트나 객체단위의 재사용성을 극대화하는데 초점이 맞추어져 있어서 소프트웨어의 유연성(flexibility)에 관한 문제는 별로 다루어지지 않고 있는 것이 현실이다. 따라서 본 논문은 소프트웨어 시스템 아키텍쳐 수준에서와 유지보수 차원의 유연성을 확보하는 방안으로 '핫 스팟 어댑터 모델'을 제안하고자 한다.