• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.5
• /
• pp.521-528
• /
• 1999

The nth-order, scalar, linear time-varying (LTV) systems can be dealt with operators on a differential ring. Using this differential algebraic structure and a classical result on differential operator factorizaitons developed by Floquet, a novel eigenstructure(eigenvalues, eigenvectors) concepts for linear time0varying systems are proposed. In this paper, Necessary and sufficient conditions for the existence of well-defined(free of finite-time singularities) SD- and PD- spectra for SPDOs with complex- and real-valued coefficients are also presented. Three numerical examples are presented to illustrate the proposed concepts.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.10
• /
• pp.1035-1043
• /
• 2006

In this study, a translational 3-DOF parallel mechanism formed by constraining the Stewart Platform Mechanism is investigated. The translational 3-DOF parallel mechanism has three struts(3-UPS type serial subchains) and in addition, has a PPP type serial subchain in the middle of the mechanism. Firstly, the closed-form forward and reverse position solutions are derived for this mechanism. And analysis on kinematic characteristics using isotropic index of the Jacobian is conducted to examine effects of design parameters for the mechanism. Lastly, a prototype mechanism is implemented and the kinematic performance of the translational 3-DOF parallel mechanism was verified through experimental work.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.5
• /
• pp.356-366
• /
• 2000

In this paper, a nonlinear $H_2/H_\infty/LTR$ control for the flexible inverted pendulum of a parallel type with Coulomb friction is presented. The dynamic equation for this system is derived by the Hamilton's principle and assumed-mode method. This hard nonlinear system can be modeled by a the quasi-linear state space model using the REF method. It is shown that the $H_2/H_\infty$ control can be applied to the nonlinear controller design of the system having Coulomb frictions if the proper LTR conditions are satisfied. In order to present the usefulness of the suggested control method, the nonlinear $H_2/H_\infty/LTR$ controller is designed to control the Position of the end point of the flexible inverted pendulum that has Coulomb frictions present in actuator parts. The results are given via computer simulations.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.422-422
• /
• 2000

Parallel manipulators have been used to a variety of applications, including the motion simulators and mechanism for precise machining. A Stewart-Gough type parallel manipulator is composed of six linear joints which have wider contact areas than revolute ones, so linear joints are more affected by frictional force. First, the reference trajectories are computed from the model of the parallel manipulator assuming that it is subject to only the gravitational force and no friction exists. In the actual operation where friction exists, the control inputs, which correspond to the friction forces, are obtained by forcing the actual joint variables to follow these trojectories by proper control. It is shown that control performance can be improved when the friction compensation based on this information is added to the controller for position control of the moving plate of a parallel manipulator.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.434-438
• /
• 1996

In this paper we present the multi-agent robot system and the vision system developed for participating in micro robot soccer tournament. The multi-agent robot system consists of micro robot, a vision system, a host computer and a communication module. Micro robot are equipped with two mini DC motors witf encoders and gearboxes, a R/F receiver, a CPU and infrared sensors for obstacle detection. A vision system is used to recognize the position of the ball and opponent robots, position and orientation of our robots. The vision system is composed of a color CCD camera and a vision processing unit(AISI vision computer). The vision algorithm is based on morphological method. And it takes about 90 msec to detect ball and 3-our robots and 3-opponent robots with reasonable accuracy

• ICROS
• /
• v.19 no.1
• /
• pp.19-31
• /
• 2013

본 고는 국내외의 지형참조항법시스템 관련 기술의 발전 동향을 살펴보고자 한다. 지형참조항법은 국외에서 1940년대부터 그 필요성이 대두된 학문으로 잠수정, 군용 전투기 등 다양한 분야에서 주로 군사목적으로 연구가 진행되었다. 1950년 ATRAN의 개발을 시작으로 1990년대 PTAN 지형참조항법기술까지 발전되어 무인기뿐만 아닌 Tomahawk 같은 유도무기에도 그 활용 범위를 넓혀가고 있다. 하지만 하드웨어적인 제약과 GPS의 발달로 관련 연구가 주춤하였으나 컴퓨터 기술의 발달, 지형측정센서의 정확도 향상과 더불어 GPS 교란 가능성 등이 부각되면서 최근 다시 관성항법시스템(INS)을 보조하는 대체 항법으로서 주목받고 있다. 주로 다중 측정치를 이용하는 방법과 비선형 필터를 이용하여 항법해 성능을 향상시키거나 병렬 다중필터를 이용하여 항법해의 신뢰성을 향상시키는 방향으로 연구가 진행 중이다. 그리고 다양한 지구물리데이터와 통합한 데이터베이스기반 복합항법 기술로 발전하고 있다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.2
• /
• pp.160-167
• /
• 2001

This paper presents control and evaluation of a new haptic device with a 6-DOF parallel mechanism for interfacing with virtual reality. This haptic device has low inertial, high bandwidth compactness, and high output force capability mainly due to of base-fixed motors. It has also wider orientation workspace mainly due to a RRR type spherical joint. A control method is presented with gravity compensation and with force feedback by an F/T sensor to compensate for the effects of unmodeled dynamics such as friction and inertia. Also, dynamic performance has been evaluated by experiments. for force characteristics such as maximum applicable force, static-friction force, minimum controllable force, and force bandwidth Virtual wall simulation with the developed haptic device has been demonstrated.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.1
• /
• pp.63-72
• /
• 2003

A new 6-DOF parallel haptic device is proposed. Many existing haptic devices require large power due to having floating actuator and also have small workspaces. The proposed new mechanism can generate 6-DOF reflecting force. This device is relatively light by employing non-floating actuators and has large workspace. Kinematic analysis and kinematic optimal design is performed for this mechanism. Dexterous workspace, global isotropic index, and global maximum force transmission ratio are considered as kinematic design indices. To deal with such multi-criteria optimization problem. composite design index is employed. For the given operational specifications, actuator sizing for this mechanism is also carried out.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.5
• /
• pp.464-472
• /
• 2006

This paper presents the two degree-of-freedom (DOF) planar parallel mechanism, called the $2{\underline{R}}RR-RP$ manipulator, whose degree-of-freedom is dependent on an additional passive constraining leg connecting the base and the platform. First, the kinematic analysis of the mechanism is performed: the inverse and forward kinematic problems are analytically solved, the workspace is systematically derived, and all of the singular configurations are examined. Then, in order to determine the geometric parameters the optimization of the mechanism is performed considering its dexterity, stiffness, and space utilization. Finally, the kinematic performances of the optimized mechanism are evaluated through the comparison study to the conventional 5-bar parallel manipulator.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.12
• /
• pp.1072-1080
• /
• 2013

In a the present day, many vision inspection techniques are used in productive industrial areas. In particular, in the semiconductor industry the vision inspection system for wafers is a very important system. Also, inspection techniques for semiconductor wafer production are required to ensure high precision and fast inspection. In order to achieve these objectives, parallel processing of the inspection algorithm is essentially needed. In this paper, we propose the GPU (Graphical Processing Unit)-based parallel processing algorithm for the fast inspection of semiconductor wafers. The proposed algorithm is implemented on GPU boards made by NVIDIA Company. The defect detection performance of the proposed algorithm implemented on the GPU is the same as if by a single CPU, but the execution time of the proposed method is about 210 times faster than the one with a single CPU.