• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.04a
• /
• pp.755-758
• /
• 2015

LED 부품소재 분야에서 가장 높은 특허 분쟁율을 나타낸 신물질 형광체는 외부로부터 흡수된 에너지를 가시광선 영역의 빛 에너지로 변환시켜주는 무기 발광 물질로 LED에서 직접적으로 빛을 내는 역할을 하는 핵심소재로 LED 전체의 발광 특성(광 변환 효율, 휘도, 연색지수 등) 향상이 가능하므로, 고온에서도 발광강도의 안정성을 유지할 수 있는 형광체에 대한 기술이 유망할 것으로 판단된다.

• Proceedings of the Optical Society of Korea Conference
• /
• 1988.06a
• /
• pp.112-116
• /
• 1988

Homodyne 방식으로 동작하는 광섬유 간섭계 센서는 주위 온도의 변화나 진동등에 의하여 시노의 크기가 불규칙하게 변화된다. 따라서 광섬유 간섭계가 직작조건에서 동작하도록 하여 감도를 최대로 유지시켜야 한다. 본연구에서는 원통형 압전자소자에 단일모드 광섬유룰 감아서 변환율 K=1.07$\pi$/V의 위상변조기를 만들고, 이를 이용하여 능동위상추적(active phase tracking)방식의 신호안정화 장치를 제작하고 광섬유 간섭계 센서의 공기중 읍압반응을 조사하였다.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.350-351
• /
• 2019

High Voltage Direct Current (HVDC) 시스템은 고압 직류 송전을 위한 시스템이다. 고압 직류 송전을 위해서는 전력변환기가 교류전력을 직류전력으로 변환해주어야 하는데, 최근에는 모듈형 멀티레벨 컨버터(Modular Multilevel Converter, MMC)가 많이 적용되고 있다. 모듈형 멀티레벨 컨버터는 단위 서브모듈이 직렬로 구성되어야 하는데 기구적으로 하나의 밸브 구조물에 6개의 서브모듈이 일정한 간격을 두고 위치하게 된다. 모듈형 멀티레벨 컨버터의 특징 중에 하나는 예비모듈이 구성되어 가용율을 높일 수 있다는 것이다. 본 논문에서는 서브모듈의 IGBT 폭파에 의해 발생되는 플라즈마가 주변 서브모듈에 도달해 절연파괴를 발생시키는지 확인하였다.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1996.06a
• /
• pp.148-151
• /
• 1996

• Proceedings of the KSEEG Conference
• /
• 2001.04a
• /
• pp.147-147
• /
• 2001

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.8
• /
• pp.863-874
• /
• 1999

세분화란 초기 원형 모델의 삼각형 메쉬를 여러 개의 작은 메쉬로 변환하는 기법으로, 간략화 된 모델을 다시 원상태로 표현하기 위해 사용된다. 기존의 보간에 의한 세분화는 전체 모델의 에지에 일률적으로 세분화를 적용하기 때문에, 효과가 적은 부분까지도 세분화가 수행하게 되어 효율이 떨어진다. 본 논문에서는 정점 변화율을 기반으로 에지를 선택하여 세분화를 수행한다. 따라서 원형 메쉬를 변환하여 세분화된 메쉬를 생성할 때, 모델의 각 부분들은 정점 변화율의 차이에 의해 서로 다른 세분화 정도를 가지게 된다. 이 과정을 통해 원형 모델의 곡률 특성이 반영된 세분화를 수행할 수 있게 되고, 전체 모델의 세분화 정도를 조정하는 것도 가능해진다. Abstract The subdivision is a mesh transformation, which makes an original triangle mesh to subdivided meshes. This method is used for recovering original model from simplified model. The existing subdivision based on interpolation is inefficient, because it is targeted for whole edges of mesh model. Therefore, this method applies to non-effective parts. In this paper the subdivision is executed by edge selection based on curvature. When original model is transformed to subdivided model by proposed method, the parts of model has different subdivision degrees by means of the averages of vertex curvature.Proposed method makes it enable subdivision, which deploy characteristics of curvatures of original model and adjusting a degree of subdivision in whole model.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.4 no.2
• /
• pp.33-38
• /
• 1998

In point of flexographic printing on generally corrugated fiberboard cartons, the precision of film master and the adequate compression rate are very important factor in bar-code printing. Also, the complete system including scanner is essential for the purpose of enhancing the reading rate. The film master had good precision when the film was prepared by means of printing/developing machine after transformation of input bar-code number through transceiver, and the BWR 100 showed better compression rate than BWR 200. Also considering the bar-code reading, the complete system targeting the reading rate above 99.8% could be configured by Omni-Directional Scanner type accomplishing the reading rate above 99.5%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.7C
• /
• pp.548-553
• /
• 2008

To reduce the bit-rate requirements imposed by a network or satisfy processing limitations imposed by a terminal, Conversion the temporal resolution of a video bit stream is a technique that may be used. This paper discusses the problem of reduced resolution transcoding of compressed video bit streams, and discussed the technique for temporal transcoding. To speed up this operation, a video transcoder usually reuses the coded motion vectors from the input video bit stream. In this paper we propose an enhanced motion re-estimation technique to maintain higher quality of coded frames. The performance of experimental results can be improved while maintaining low computational complexity for a reduced frame rate video transcoder.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.3
• /
• pp.18-27
• /
• 2009

In this paper, we propose a frame rate conversion algorithm using adaptive search-based motion estimation (ME). The proposed ME method uses recursive search, 3-step search, and single predicted search as candidates for search strategy. The best method among the three candidates is adaptively selected on a block basis according to the predicted motion type. The adaptation of the search method improves the accuracy of the estimated motion vectors while curbing the increase of computational load. To support the proposed ME method, an entire image is divided into three regions with different motion types. Experimental results show that the proposed FRC method achieves better image quality than existing algorithms in both subjective and objective measures.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.4
• /
• pp.66-72
• /
• 2010

In this paper, AZO thin film was deposited on polyethylene terephthalate(PET) substrate by r. f. magnetron sputtering method from a ZnO target mixed with 2[wt%] Al2O3. The flexible film-typed dye sensitized solar cell(F-DSC) was fabricated and photo-electric conversion efficiency was investigated. The results showed that the minimum resistivity and the maximum deposition rate of AZO conducting film were recorded as $1.8{\times}10^{-3}[{\Omega}{\cdot}cm]$ and 25.5[nm/min], respectively at r.f. power of 220[W]. From the analysis of XPS data an improvement of electrical resistivity or an increase in carrier concentration with increasing sputtering power may be related to the generation of lattice imperfections as a result of increasing component ratio of O1s/Zn2p, which generates donor carriers or active growth of crystalline grain. The photo-electric conversion efficiency of F-DSC with AZO conducting electrode was over 2.79[%], which was comparable as that with commercially available ITO electrode.