• Proceedings of the Optical Society of Korea Conference
• /
• 1991.07a
• /
• pp.115-121
• /
• 1991

레이저 반점사진 계측법의 원리와 이를 응용하여 물체표면의 움직이나 변형을 재는 여러 가지 방법에 관하여 설명하였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.8
• /
• pp.841-846
• /
• 2014

FBG sensors are mainly used to measure deformation of structures such as tunnels, bridges and ships. In this paper, an interrogator of FBG sensors is developed and implemented to measure the status of structures. A developed interrogator includes CAN wired and Zigbee wireless communication for remote monitoring. Strain of structure is measured using shift of wavelength of reflected light from FBG sensor. A digital signal controller is used to process signals of a FBG sensor and transmit data for remote monitoring. As a result of experiment, developed interrogator is effective to measure deformation of structures.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.8
• /
• pp.1137-1142
• /
• 2013

FBG sensors are mainly used to measure strain and temperature of structures. In this paper, an interrogator of FBG sensors is developed and implemented to measure the crack of structures using FPGA and DSP. Developed interrogator consists of an optical source, an optical circulator, an optical grating and a CCD sensor and controller. The spectrum of the reflected light from the FBG sensor is analyzed and peak wavelength is detected. Next, strain of structure can be measured using shift of peak wavelength. Centroid algorithm and Gaussian fitting which are mainly applied to detect peak wavelength of the interrogator are compared in this paper. As a result of experiment, Gaussian fitting is suitable for a developed interrogator.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.5
• /
• pp.87-95
• /
• 2010

Lots of bridge structure generated the change of outward formation according to durability capability and decrepitude by long use. Especially, in case of the typhoon, snowing and earthquake is going to make rapidly more worse formation about the old structural facilitys. Also, outward formation by irregular and micro-distortion in bridge structure could not easily checked by normal diagnostics method. As a result, performance-capability of structure facility is getting to make a decline in standard of structure performance. Recently, real-time monitoring technology by wireless environment go into the study of irregular movement for structure facility. This paper presents the development of sensor to displacement checking about bridge structure. Sensing method of developed sensor put bring into the gyroscope technology using the acceleration speed and angular acceleration speed. This paper also will simulated to verified the monitoring capability of developed sensor against random vibration, frequency and distortion in simulated equipment.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.13 no.1
• /
• pp.69-76
• /
• 1995

This study is the 3-D precision deformation measurement of a bridge, obtain results of precision control points by GPS and 3-D measurement system and develope efficientlty technices which can solve precision 3-D analysis by CRP In the result, we could overcome the problems of former control point measurement in the way of the combination system of GPS and 3-D measurement system to positioning decision of reference points and control points. Then we could symplify old measurement process on the 3-D deformation analysis of a linear structure and complement parted analysis fault of measurement instrument.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.6
• /
• pp.711-721
• /
• 2009

This study proposed digital close-range photogrammetric technique to measure deformation of I-plate-girder bridge. To compare deformation-measurement using the proposed method, a loading tester is used in the same time. As results, deviations of measuring values between the two methods range from 1mm to 2mm, and we could find-out simultaneously deflection and torsion of I-plate girder by repeated load of train. Then this study verified a measuring feasibility of I-plate-girder deformation by the proposed method. This may be alternative method of precise-stability inspection and manpower inspection.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1987-1989
• /
• 2003

3차원 형상을 측정하는 측정법으로는 접촉식과 비접촉식이 있는데 최근에는 물체의 표면을 손상 시키지 않으면서 물체의 변형 상태 등을 정밀하게 측정할 수 있는 비접촉식 측정법이 주로 사용되어 지면서 변형, 진동, 결함 등의 다양한 측정 분야에 찰용되고 있다. 이는 광학 간섭의 하나인 Twyman-Green 간섭계를 이용하여 간섭 무의 패턴을 PZT Controller로 위상 이동하여 CCD 카메라로 물체의 영상을 얻어 위상 지도를 추출, 이미지를 분석하여 3차원 물체를 해석하고자 한다. 하지만 이미지 측정시 미세 진동 및 조명 등에 의한 노이즈가 발생하게 되어 물체의 정확한 정보를 얻기가 어려워 노이즈 제거를 위한 이미지 처리 알고리즘 개발과 Unwrapping 처리, 위상이동 알고리즘 개발 등을 통하여 좀더 정확한 정보를 얻고자 한다.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.4
• /
• pp.503-514
• /
• 2006

FBG sensors are capable of measuring the strain of structures easily and more durably than electric resistance gauges. Thus, many researches are dedicated to the application for the response monitoring or non-destructive evaluation of structures using FBG sensors. Additionally, the measured strains at the top and bottom of a cross-section can be transformed into the curvature of the section, which can be used to calculate its vertical displacement. Hence, this study aims to measure the dynamic strain signals of a steel section simply supported beam and to estimate the dynamic displacement from the strain signals, after which the estimated displacement is com pared with the measured displacement. The dynamic characteristics (natural frequency, damping ratio and mode shape) of the beam are predicted from both the estimated and measured displacement signals, and from the strain time history of the FBG sensors. The predicted properties are compared with those of an analytical model of the beam. The estimated displacement. However, the predicted dynamic properties from both the estimated displacements and the measured strains are well-correlated with those from the measured displacement. It is therefore appreciated that the estimation of the dynamic properties of FBG sensor signals is reasonable. Especially, the strain signal of the FBG sensor was amplified at a higher-frequency region in comparison with the displacement estimation with higher-mode properties.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.214-216
• /
• 2004

3차원 홀로그램의 생성에 이용되었던 변형 삼각간섭계를 이용한 비접촉진단 방법에 대하여 논하고자 한다. 변형 삼각간섭계를 이용한 비접촉진단은 측정대상물체의 간섭패턴을 구하고 이로부터 위상지도와 변형량을 계산함으로써 이루어질 수 있다. 본 논문에서는 변형 삼각간섭계를 이용한 간섭패턴 생성과 관련한 몇 가지 실험결과를 제시한다.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1976-1977
• /
• 2003

3차원 영상저장과 복원에 이용되어왔던 변형 삼각간섭계를 이용하여 비접촉진단에의 응용가능성을 연구한다. 변형 삼각간섭계를 이용하여 측정대상물체의 간섭패턴을 3-5개 구하고 이로부터 위상지도를 얻고 이로부터 변형량을 계산할 수 있다는 것을 이론적으로 제시한다.