• Journal of Korean Society of Archives and Records Management
• /
• v.16 no.2
• /
• pp.29-55
• /
• 2016

Korean public organizations create electronic documents through electronic document management systems under the e-Government scheme. A majority of these public documents are saved in vendor-dependent file formats, mainly HWP. Vendor-dependent formats can be opened only with specific software, which requires purchase. As the license does not guarantee compatibility between past and future versions, interoperability problems occur in long-term preservation, which need to be solved. Any error from the elimination of styles or no matching elements in document definition during conversion from vendor-dependent formats to the XML-based standard exchange format leads to file open failure or the modification of original documents. This study introduces the Open Document Format (ODF) and investigates the effects of adopting ODF in the creation, exchange, management, and preservation of public records.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.126-126
• /
• 1999

본 실험의 목적은 FED의 상부, 하부 전극으로 사용되는 Mo를 건식, 습식 식각함으로써 DED 소자의 공정을 개발하는 것이다. Mo는 $261^{\circ}C$의 높은 융점을 지니고 있으며, 우수한 열적 안정성과 비교적 낮은 비저항을 가지는 재료로써 FED와 같은 전계 방출 소자의 cathod 팁 및 전극물질로 사용되어지는 가장 보편적인 물질이다. FED와 같은 전계방출소자가 갖추어야 할 요건은 전자 방출 영역이 소자 동작시 변형되지 않아야 하고, 기계적 ,화학적, 열적 내구성이 좋아야 함인데 이러한 요건을 충족시킬 수 있고 가장 범용적으로 사용되는 물질이 Mo이다. 실험에서 사용된 Mo는 DC magnetron sputter를 사용하여 Ar 가스를 첨가하여 5mTorr하에서 Si 기판위에 증착속도를 300$\AA$/min로 하여 1.6$\mu\textrm{m}$ 증착하였다. 본 실험의 Mo 식각은 고밀도 플라즈마원인 ICP를 이용하였다. 식각특성은 식각 가스조합, inductive power, bias voltage, 공정 압력의 다양한 공정 변수에 따른 식각특성 변화를 관찰하였다. 식각시 chlorine 가스를 주요 식각 가스로 사용하고 BCl3, O2, Ar을 첨가가스로 사용하였으며, inductive power는 300-600, bias voltage는 120-200V 사용하였고 압력은 15-30mTorr, 기판온도는 7$0^{\circ}C$로 유지하였으며 식각마스크로는 electron-beam evaporator로 1$\mu\textrm{m}$ 증착한 SiO2를 patterning하여 사용하였다. 식각속도는 stylus profiler를 이용하여 측정하였으며 식각후 profile은 scanning electron microscopy (SEM)을 통하여 관찰하였다. 실험 결과 순수한 Cl2 BCl3 가스만을 사용한 경우 보다는 Cl2 가스에 O2를 첨가하였을 때 좋은 선택비를 얻었다. 또한, inductive power와 bias voltage, Mo의 식각속도의 적절한 조절을 통해 SiO2에 대한 선택도를 변화시킬 수 있었다. Cl2:O2비를 1:1로 하고 400W/-150V, 20mTorr의 압력, 7$0^{\circ}C$ 기판온도에서 식각시 200$\AA$/min의 Mo 식각속도, SiO2와의 선택비 8:1을 얻을 수 있었다. 또한 실제 FED 소자 구조형성에 적용한 결과 비등방적인 식각형상을 형성할 수 있었다.

• The KIPS Transactions:PartB
• /
• v.12B no.4 s.100
• /
• pp.429-436
• /
• 2005

A simple stereo matching algorithm using population-based incremental learning(PBIL) is proposed in this paper to decrease the general problem of genetic algorithms, such as memory consumption and inefficiency of search. PBIL is a variation of genetic algorithms using stochastic search and competitive teaming based on a probability vector. The structure of PBIL is simpler than that of other genetic algorithm families, such as serial and parallel ones, due to the use of a probability vector. The PBIL strategy is simplified and adapted for stereo matching circumstances. Thus, gene pool, chromosome crossover, and gene mutation we removed, while the evolution rule, that fitter chromosomes should have higher survival probabilities, is preserved. As a result, memory space is decreased, matching rules are simplified and computation cost is reduced. In addition, a scheme controlling the distance of neighbors for disparity smoothness is inserted to obtain a wide-area consistency of disparities, like a result of coarse-to-fine matchers. Because of this scheme, the proposed algorithm can produce a stable disparity map with a small fixed-size window. Finally, an alterative version of the proposed algorithm without using probability vector is also presented for simpler set-ups.

• Archives of design research
• /
• v.17 no.3
• /
• pp.91-100
• /
• 2004

Natural forms could be ultimate visual expression power that affects on the industrial design. The rule of power in nature as nature formal characteristics have a direct influence and can be also applied to productional and artificial form. All organic forms and structures in nature have unique form and shape to be self controlled and good in order. Such an order in nature comes from regular and ratio principles which has aesthetical order by mathematics. The specialty of beauty in nature can be revealed not only visual form but also the ratio, balance and rhythm of structural principles. As we examine the aesthetic source, embodied some object can be developed into basic principles. Furthermore, through this study we can find out that the form theory in nature forms share the quality attribute with geometrical form to be shown in industrial product design. In this context, this study aims to make dear visual quality of organic form and structure that is immanent in nature about a form as formative principles of industrial product design, the significancy of this study is to prove the application into functional and structural form of product design.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.5748-5755
• /
• 2015

Scribing is cutting process to determine production amount and characteristic of LED chip. So it is an important process for fabrication of LED chip. Mechanical process and conventional scribing process with laser source has several problems such as thermal deformation, decreasing of material strength and limitation of cutting region. To solve these problems, internal laser scribing process that generates void in wafer and derives self-crack has been researched. However, studies of sapphire wafer cutting by internal laser scribing process for fabrication of LED chip are still insufficient. In this paper, cutting parameters were determined to apply internal laser scribing process for sapphire wafer for fabrication of LED chip. Then, foundation of cutting condition was established to set up internal laser scribing system through investigation of cutting characteristics by several experiments.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.952-962
• /
• 2015

In this study, multilayered rings with a large outer diameter have been developed using a hot ring rolling process. The ring rolling process has been analyzed by rigid plastic finite element analyses (FEA) using the AFDEX2D and AFDEX3D/HEXA/RING simulators, where the finite element meshes received severe plastic deformation are remeshed into a fine mesh-size using a dual-mesh system. According to the simulated results, the design variables of the multilayered rings were determined and real tests were conducted to check the validity of the simulation results. By adopting the hot ring rolling process, the input weight of raw materials was reduced by 40% against the conventional hot forging process and that the recovery rate was increased by 24%. The measurement of the averaged roundness was satisfied within 0.5 mm for both the inner and outer diameters. Moreover, the hot ring rolling processes yielded 1.49 Cpk for the outer-diameter and 0.84 Cpk 0.84 for the inner-diameter.

• The KIPS Transactions:PartB
• /
• v.9B no.5
• /
• pp.653-662
• /
• 2002

Fingerprint recognition is a task to find a matching pattern in a database for a specific persons fingerprint. To accomplish this task, preprocessing, classification, and matching steps are taken for a large-scale fingerprint database but only the matching step is taken without classification for a small-scale database. The primary matching method is based on minutiae (ridge ending point, bifurcation). This matching method, however, requires a very complex computation to extract minutiae and match minutiae-to-minutiae accurately due to translation, rotation, nonlinear deformation of fingerprint and occurrence of spurious minutiae. In addition, this method requires a laborious preprocessing step in order to improve the quality of fingerprint Images. This paper proposes a new simple method to eliminate these problems. With this method, Gabor variance is used instead of minutiae for fingerprint recognition. The Gabor variance is computed from Gabor features that result from filtering a fingerprint image through Gabor filter. In this paper, this method is described and its test result is shown, demonstrating the potential of using this new method for fingerprint recognition.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.6
• /
• pp.481-489
• /
• 2000

A time-frequency analysis method was developed to analyze the dispersive waves caused by impact loads in structural members such as beams and plates. Stress waves generated by ball drop and pencil lead break were recorded by ultrasonic transducers and acoustic emission (AE) sensors. Wavelet transform (WT) using Gabor function was employed to analyze the dispersive waves in the time-frequency domain, and then to find the arrival time of the waves as a function of frequency. The measured group velocities in the beam and the plate were compared with the predictions based on the Timoshenko beam theory and Rayleigh-Lamb frequency equations, respectively. The agreements were found to be very good.

• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.726-735
• /
• 2013

This paper proposed face recognition methods about performance improvement of the face recognition using the properties of wavelet transform. Using discrete wavelet transform is Daubechies D4 filter that is similar to mother wavelet transform. For discrete wavelet transform method, In this case, by using LL subband only we can reduce processing time and amount of memory in recognition processing. To improve recognition ratio without further loss of 2 dimensional data changing, We applies 2D LDA. We perform SVM training algorithm to the feature vector obtained by 2D LDA. Experiment is performed using ORL database set and Yale database set by Matlab program. Test result shows that proposed method is superior to existence methods in recognition rate and performance time.

• Journal of the Institute of Convergence Signal Processing
• /
• v.16 no.4
• /
• pp.122-128
• /
• 2015

As multimedia information is spread over cyber networks, problems such as protection of legal rights and original proof of an information owner raise recently. Various image transformations of DCT, DFT and DWT have been used to embed a watermark as a token of ownership. Recently, SVD being used in the field of numerical analysis is additionally applied to the watermarking methods. A watermarking method is proposed in this paper using Gabor cosine and sine transform as well as SVD for embedding and extraction of watermarks for digital images. After delivering attacks such as noise addition, space transformation, filtering and compression on watermarked images, watermark extraction algorithm is performed using the proposed GCST-SVD method. Normalized correlation values are calculated to measure the similarity between embedded watermark and extracted one as the index of watermark performance. Also visual inspection for the extracted watermark images has been done. Watermark images are inserted into the lowest vertical ac frequency band. From the experimental results, the proposed watermarking method using the singular vectors of SVD shows large correlation values of 0.9 or more and visual features of an embedded watermark for various attacks.