• Applied Microscopy
• /
• v.37 no.2
• /
• pp.83-91
• /
• 2007

The present study examined the epidermal changes of adhesive disks which occur during attachment in Parthenocissus tricuspidata using scanning and transmission electron microscopy. Several adhesive disks, each covered with a bract, develop from the shoot apical meristem during early development. In the initial stage, the adhesive disks are club-shaped and their upper and lower epidermis are indistinguishable. However, in the actively growing stage, they become spherical and both epidermis are clearly differentiated into the adventitious roots. Prior to wall attachment, the adhesive disks exhibit adaxial convex and abaxial concave shapes, and electron-dense substances are abundant in the vacuoles of epidermal cells. The peripheral area of the adhesive disk is adhered first to the wall surface, while the central area is drawn inward in a vacuum-like state during attachment. As the attachment progresses and the electron-dense substances continue to discharge, the upper and lower epidermis rapidly undergo deterioration and the disks shrink considerably. At this stage, structural changes of the lower epidermis occur much faster than in the upper one. The discharged substance is accumulated on the wall surface, and this aids the attachment of adhesive disks on the wall for long periods. In this manner, the shape and structure of the adhesive disk epidermis change drastically from initial growth to the mature stage. Further, the role of electron-dense substance and shrinkage of the disk during attachment has been discussed in Parthenocissus tricuspidata.

• The korean journal of orthodontics
• /
• v.29 no.4 s.75
• /
• pp.467-481
• /
• 1999

Cleft lip and/or palate is one of the most common congenital craniofacial anomalies. According to previous epidemiologic studies, incidence of cleft lip and/or palate has been increasing nowadays. However, there is no report about epidemiologic study of cleft lip and/or palate patients who visited dept. of orthodontics in Korea. So the purpose of this study was to provide the epidemiological characteristics and important basic clinical data for the diagnosis and the treatment of the cleft lip and/or palate patients. With the orthodontic and cleft charts, diagnostic models and X-ray films from 250 patients with cleft lip and/or palate who visited Dept. of Orthodontics, Seoul National University Dental Hospital during the last 11 years, the authors investigated patient's visiting yew, types of cleft, patient's gender, and Angle's classification of malocclusion, and surgery timing. The results were as follows ; 1. The number of cleft patients who visited Dept. of Orthodontics, SNUDH increased during 1988-1990 and then it declined until 1992. From 1993 to 1996, it showed a stationary trend. After 1997 it showed an overwhelmingly increasing trend. 2. In the cleft type, the ratio of cleft lip cleft lip and alveolus cleft palate : cleft lip and palate was 7.6:19.2:9.6:63.6. In cleft position, unilateral clefts were more than bilateral ones (cleft lip 79:21, cleft lip and alveolus 77:23, cleft lip and palate 75.5:24.5). In cleft side, left clefts were mote than right clefts (cleft lip 53.3:46.7 cleft lip and alveolus 59.5:40.5, cleft lip and palate 59.2:40.8). 3. In gender ratio, males were more than females in cleft lip (57.9:42.1), cleft lip and alveolus (68.8:31.2) and cleft lip and palate (76.1:23.9). But in cleft Palate females were more than males as 41.7: 58.3. 4. In the age groups, 7-12 year group was the most abundant as $52\%$, and then 0-6 year group ($20.4\%$), 13-18 year group ($17.2\%$), more than 18 yew group ($10.4\%$) were followed as descending order. 5. Most of the cleft lip repair surgeries were operated in 0-3 month ($60.3\%$) and 4-6 month ($17.9\%$). 6. The cleft palate repair surgeries were done in 1-2 year ($31.7\%$), 0-1 year ($25.6\%$), 2-3 year ($12.1\%$), more than 5 year ($11.6\%$) as descending order. 7. The lip scar revision surgeries were done before admission at elementary school in $60\%$. (4-6 you ($27.5\%$), 6-8 year ($19.6\%$), more than 10 year ($19.6\%$), 2-4 year ($13.7\%$) as descending order) 8. The rhinoplasties were done before admission at elementary school in $51.7\%$. (0-2 year ($7.1\%$), 2-4 year ($14.3\%$), 4-6 year ($21.4\%$), 6-8 year ($14.3\%$)). 9. The pharyngeal flap were done at 6 Y (72.5 months) after birth on average and there was even distribution of surgery timing. 10. In relationship between Angle's classification of malocclusion and cleft types, Class I was most abundant and Class III, Class II were followed as descending order in cleft lip group. But Class III was most abundant and Class I, Class II were followed as descending order in cleft lip and alveolus group, cleft palate group, and cleft lip and Palate group. The percentage of frequency in Class III malocclusion was overwhelmingly higher in cleft lip and palate group than any other groups. 11. Because the frequency of class III malocclusion was most prevalent in all age groups, anterior crossbite was the most common chief complaint of cleft patients.

• Cartoon and Animation Studies
• /
• s.33
• /
• pp.317-341
• /
• 2013

Found Footage Film has been increasingly addressed between film and visual art world in the age of rapid media change. With regards to this self-conscious found footage filmmaking, narrative structures are unraveled to relate new stories, images are removed from their original context only to reappear in a different context, new layers that alter the meaning are added, stereotypes from Hollywood movies are exposed, and new montages are used to destroy the illusion of the medium itself. The physical properties of the original material are also emphasized or altered in order to add a new meaning. The starting point of this study is the recognition of the origin of found footage film. It traces back to the found object from primitive impulse and found art from Dada and surrealism. Many found footage films have been at least partly inspired by Duchamp's ready-mades. These films use footages that the filmmakers did not shot, and even footage that was never intended as art. This essay deals with the found footage practices and interrogates the aesthetic implications by the concept of self-reflexivity. Self-reflexivity means consciousness turning back on itself, and found footage film is about films which call attention to themselves as cinematic constructs. It breaks with art as illusionism and exposes their own factitiousness as textual constructs. Furthermore, the inevitable mortality of celluloid and temporal reconstruction of original film will be treated. Recentely, many attention has been given to role of Found Footage Film. I hope to add the understanding of the artistic found footage film with this study.

• The Journal of the Petrological Society of Korea
• /
• v.27 no.3
• /
• pp.173-184
• /
• 2018

Geologic structures related to the latest event in the evolution around Gyeongsang Basin are mainly associated with the Yangsan Fault. In particular, the structures in the northern part of the Yangsan Fault are mainly observed in the region between Bogyeongsa Temple and Danguri. Such structures are also clustered in the vicinity of the Yangsan Fault, exhibiting similar geometric and kinematic patterns. In general, N-S and NE-SW trending fractures and tectonogeomorphic lineament are mainly eastward dipping reverse faults, such that the blocks in the east of the structures moved west or northwest. The reverse faults are segmented by NW trending fractures that accommodate strike-slip movements. The reverse faults and geomorphotectonic lineaments related to the latest event of deformation in the northern part of the Yangsan Fault show a westward convex patterns. We infer that these structures were initially normal faults that formed during a NW-SE extensional environment and were later reactivated during an E-W compressional one. Such a deformation pattern is also well developed around Pohang-Heunghae area based on the tectonogeomorphic analysis, which appears to be closely related to the Pohang Earthquake (15 Nov. 2017), and its development of the surface rupture and highly damaged zones.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.6
• /
• pp.285-296
• /
• 1999

Preloading method is used to prevent the settling of a foundation and to increase the strength of ground by consolidation settlement in advance. But, the embankment used in preloading method brings large deformation and sliding failure in the soft ground. Recently, reinforcement method is often used in embankment in order to prevent sliding failure. But, until now, the research on the stability analysis considering both the rate of strength increase of clay by embankment load and increase of resistance force by the geosynthetics in the embankment body is not found. In this study, the stability analysis program(REAP) for embankment including these two points is developed. By this program(REAP), the stability analysis can be done about during the gradual increase of embankment and the stability counterplan can be established when the safety factor is lower than allowable safety factor of design. After calculating the position of sliding failure surface, the force of geosynthetics which is selected by either the effective tensile strength or tensile force caused by the displacement of soil mass in this position is applied to stability analysis. And the increase of resisting moment can be calculated by this force. Also, the construction period can be estimated and the time for the appropriate counterplan can be decided in order to maintain the stability of embankment. And then, safe and economical embankment design can be performed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.2
• /
• pp.389-395
• /
• 2017

A study was carried out to improve the field implementation of asphalt surface reinforcement method which is a preventive maintenance. Mean Texture Depth (MTD) was measured to quantify the surface condition and used to determine the optimum application rate. Determining the application rate using MTD can reduce the material loss from 30% to 15%. In order to reduce the curing time to 30 minutes, the heat capacity of $317kcal/m^2$ is required. Therefore, the design capacity of the heating curing device requires more than 380,000 kcal/hr. The asphalt surface reinforcement method is preferably applied at a time when slight cracking occurs before the permanent deformation becomes serious. Through the analysis of the pavement survey data, it was decided to apply the surface reinforcement method at the crack rate of 3~4%. Heating the surface reinforcement agent to $50^{\circ}C$ improves workability and ensures sufficient penetration depth even at a crack width of 1 mm. The results will be utilized as basic data for the development of automated construction equipment for efficiency improvement.

• Archives of design research
• /
• v.11 no.2
• /
• pp.215-226
• /
• 1998

As late as middle of 1980s, what was referred to as new model cars consisted, on the premise of a standardized packaging layout, principally of the endeavor to transform their style images by changing little by little the form of layouts almosts similar to or with larger bodies than those of the old model ones. Afterwards even in the period of competition of engeineering and mechanical body styles for reducing fuel cost and improving comfortability in riding, the standardized packaging layout did not change visibly, simply trying to ameliorating commercialism through high output and high efficacy on the engineering part. Today the sudden prevalent motorization in every walk of life has brought about the development of the car industry, thus producing surplus supply and technical standardization. This phenomenon of technical standardization leads the concept of the renovation of car design to a way quite different from that of the past and so may be said to be confronted with an era that requires genuine-sense car design in a way. It seems that interior design plans are of much more importance than external shapes. This is because the effort for enhancing comfortability to keep car passengers' needs of transportation is one of the essences of car design. The objective of this study consists in inquiring into how to plan motorcar interior design, an essential prerequisite in determining the external or of a car, obtaining data needed via analysis of interior design plans of the car models that have won favorable criticism from consumers, thus contributing to the use of the data obtained for reference in car design activities in a genuine sense.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.583-589
• /
• 2017

The 1900s in New Orleans, the harbor city, was indeed an era of confusion because there were various ethnic groups and races. Songs that had been sung by slaves taken from Africa, Black spiritual music, blues, British folk songs, French folk music, ballet music, Spanish dance music, and the march of military bands were mixed with Rag Time to achieve diversity. This developed the beginning of jazz. While swing jazz was most popular and loved by the public during the 20th century, the bebop preferred the small scale organization of musical instruments and developed as a form of jazz featuring the impromptu musical performances. Later, cool jazz, a new style involving the fast and complicated code progress, emerged with free jazz, which features the fundamental rupture from the tradition of the jazz. Miles Davis, who introduced the rock beat in jazz, started fusion jazz. Although jazz has been named differently depending on the era, the main attraction of jazz lies on improvisation. In other words, despite a small changes in code progress and rhythm, the most important thing the player considers is improvisation. Some famous players who lived in the same era followed the whole atmosphere but each had their own style. So, even when they did play the same song, they revealed their style in solo parts despite the same head.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.2 no.1
• /
• pp.62-70
• /
• 2003

Purpose: We examined the kinematics and kinetics of the shoulder in youth baseball pitchers in light of the mechanisms of development of little league shoulder and humeral retrotorsion. Materials and Methods: The joint kinematics and the net force and torque acting on the humerus were calculated in fourteen youth pitchers throwing in a simulated game. Results: The major force component acting on the humerus was a tensile force of 378$\pm$81 N that peaked just after ball release. The predominant torque on the humerus was an external rotation torque about the long axis of the humerus. This torque reached a peak value of 35.3$\pm$6.7 Nm about 73$\%$through the pitching motion. This torque is approximately 66$\%$ of the torque required to fracture of the adult humerus. Conclusions: The direction of the humeral torque was consistent with the development of increased humeral retrotorsion in the throwing arm. Shear stress arising from the high torque during the late cocking phase likely leads to deformation the relatively weak proximal humeral epiphysis. The external rotation torque applied to the humerus during the pitch also agrees with the proposed mechanism for development little league shoulder, which has been hypothesized to be due to rotational stresses acting on the epiphysis during the throwing motion.

• Korean journal of communication and information
• /
• v.70
• /
• pp.132-164
• /
• 2015

The formation of knowledge of the people of Korean society is the social practices of collective subjectivity. Subjectivity is the truth of the self, which is incessantly created, questioned and modified in the milieu of self-reflection. In an attempt to examine the hermeneutics of the subject of Korean society, a conceptual framework is proposed, which, with the notion of life embedded, consists of a historical sequence of the popular, minjung, multitude, people and community. The period of 1960s saw the ambiguous mass of lifes floating, the individual with his/her own interior world of consciousness emerge. The ideological solidarity is formed in the the next two decades, in contestation with immediate and physical threatening such as poverty and dictatorship. The democratization of Korean society and the global expansion of neoliberal regime gave a re-birth of multitude and people which is characterized with their pursuit of the co-existence and co-realization of singularity and universality on the ethical principle of the open and communicative radicality.