• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.1
• /
• pp.9-15
• /
• 2011

In this paper, we designed and fabricated a dual-band bandpass filter which can control upper and lower bandwidth using the transformed E-shaped dual-mode resonator. The filter is made the coupling between even-mode not to affect odd-mode resonant frequency by the transformed resonator to control upper bandwidth effectively. The cross coupling between input and output feed lines was employed to improve stopband characteristic. The bandpass filter has been designed to indicate the same bandwidth at center frequency 2 GHz and 3 GHz to show to control bandwidth.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.11a
• /
• pp.125-127
• /
• 2011

구조물의 동적특성인 모드형상을 통해 국부적인 손상을 탐지하는 손상평가 기법은 많은 연구자에 의해 발전되고 있다. 하지만 플로팅 구조물에 대한 손상탐지 기법은 그 사례를 찾아보기 힘들다. 본 논문에서는 플로팅 구조물의 축소모형을 제작하고, 손상을 모사하여 손상전과 손상 후 구조물의 모드형상에서 얻을 수 있는 모달 변위로 나타낸 손상지수를 통해 플로팅 구조물의 손상을 탐지 하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.28-33
• /
• 1995

본 논문에서는 조합변형이 각각의 모드에 따라 매우 다양하게 달라질 수 있으며 각 모드의 역학적 거동에 따라 제어기의 최적 위치가 달라지는 것을 보였으며 이러한 최적의 위치를 효과적으로 파악할 수 있는 각 모드의 기하학적인 중심에 대하여 기술하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.10a
• /
• pp.279-281
• /
• 2012

구조물의 동적특성인 모드형상을 통해 국부적인 손상을 탐지하는 손상평가 기법은 많은 연구자에 의해 발전되고 있다. 하지만 플로팅 구조물에 대한 손상탐지 기법은 그 사례를 찾아보기 힘들다. 본 논문에서는 콘크리트재질의 플로팅 구조물의 축소모형을 제작하고 손상을 모사하여 손상 전, 후 구조물의 모드형상에서 얻을 수 있는 모달 변위로 나타낸 손상지수를 통해 플로팅 구조물의 손상을 탐지하였다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.415.1-418
• /
• 1998

G.723.1은 부호화 방식은 제한된 계산량으로 낮은 전송율에서 음성을 가장 잘 표현할 수 있도록 최적화되어 있어서, 음성주파수 대역에 있는 DTMF톤의 경우 왜곡이 발생되어 전송성능이 떨어지는 문제점이 있다. 본 논문에서는 DTMF톤의 투명한 전송을 위해 LSP 계수를 이용한 톤 신호 검출에 기반을 둔 음성모드와 톤모드의 이중모드를 가지는 변형된 G.723.1 음성부호화 방식을 제안한다. 제안된 방식에서 음성모드 부호화기는 기존의 방식과 동일하며, 톤모드의 경우 부호화 단계에서 spectral smoothing 및 피치주기 검출 방식 등을 수정함으로써 수신단의 변경없이 DTMF톤의 전송왜곡을 개선시킨다. 본 논문에서는 컴퓨터 모의실험을 통해 제안된 방법이 DTMF 전송성능을 개선시킴을 확인하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.2
• /
• pp.171-180
• /
• 2008

The aim of this paper is to clarify the structural performance of RC beams strengthened with Carbon Fibre Reinforced Polymer(CFRP) plates using channel-type anchorage system. Twelve RC beams were specifically designed without and with a channel-type anchorage system, which was carefully detailed to enhance the benefits of the strengthening plates. All the twelve beams were identical in terms of their geometry but varied in their internal reinforcement, concrete strength. All the beams were tested under four point bending and extensively instrumented to monitor strains, cracking, load capacity and failure modes. The structural response of all the twelve beams is then critically analyzed in terms of deformability, strength and failure processes. It is shown that with a channel-type anchorage system, a brittle debonding failure of a strengthened beam can be transformed to an almost ductile failure with well-defined enhancement of structural performance in terms of both deformation and strength.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 1999.04a
• /
• pp.239.2-243
• /
• 1999

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.2_spc
• /
• pp.275-289
• /
• 2020

In 2017, multimodal transportation tests for evaluating road, sea, and rail transport were performed by research institutes in the US, Spain, and the Republic of Korea. In this study, acceleration and strain data determined through road and sea tests were analyzed. It was investigated whether the load generated for each transport mode was amplified or attenuated according to the load transfer path. From the results, it was confirmed that the load transfer characteristics differed according to the transportation mode and loading path. The effects of strain determined through each test on the structural integrity of the spent nuclear fuel were also investigated. It was found that the magnitude of the measured strain had a negligible effect on the structural integrity of the spent nuclear fuel, considering its fatigue strength. The results for the acceleration and strain data analyses obtained in this study will be useful for scheduled domestic transportation tests under normal transport conditions.

• Journal of Korean Society of Steel Construction
• /
• v.14 no.3
• /
• pp.403-411
• /
• 2002

This paper described the ultimate strength and deformation limit of welded T-joints in cold-formed square hollow sections. Previous studies showed that the T-joint has an obvious peak load. with the failure mode of chord-web buckling at a ratio of branch width to chord width ($\beta$) of above 0.8. Similar to a T-joint with chord-flange failure mode, the strength at a certain deformation limit can be regarded as the ultimate strength of a T-joint Based on the experimental results including tests done by Kato and Zhao, the deformation limit was proposed as 3%B for $10.7{\leq}2{\gamma}(B/T){\leq}42.3$ and $0.8{\leq}{\beta}{\leq}1.0$. The strength formula of CIDECT and those of other researchers were also compared with the test results. Finally, the strength formula based on the column buckling was proposed.

• Elastomers and Composites
• /
• v.43 no.1
• /
• pp.25-30
• /
• 2008

A bushing is a device used in automotive suspension systems to reduce the load transmitted from the wheel to the frame of the vehicle. A bushing is a hollow cylinder, which is bonded to a solid steel shaft at its inner surface and a steel sleeve at its outer surface. The relation between the force and moment applied to the shaft and the relative deformation and rotational angle of a bushing exhibits features of viscoelasticity. Since a moment-rotational angle relation for a bushing is important for multibody dynamics numerical simulations, the simple relation between the moment and rotational angle has been derived from experiment. It is shown that the predictions by the proposed moment-rotational angle relation are in very good agreement with the experimental results.