• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.156-157
• /
• 2001

전계 흡수 광 변조기는 우수한 소광비와 낮은 전력 소모로 넓은 대역폭을 확보할 수 있으며 LD와의 단일 집적인 EML(electro-absorption modulator integrated laser diode)의 제작도 용이하므로 Microwave-Photonics 시스템에 매우 적합한 소자로써 근래에 활발한 연구가 진행되어지고 있다. 전계 흡수 광 변조기의 대역폭을 최대한 확보하기 위해서는 진행하는 마이크로파의 위상속도와 광파의 그룹 속도가 정합 되어야 하며 소자의 임피던스가 50Ω에 정합 되어야 한다. (중략)

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.557-561
• /
• 2002

본 논문에서는 전자식 형광등의 직류구동과 AM 변조시 빛의 주파수 특성에 관하여 다루고 있다. 전자식 형광등을 구동하는 안정기 회로는 상용전원을 직류로 정류시켜 고주파로 변환하여 형광등을 구동시킨다. 형광동의 구동에 사용되는 안정기 회로의 내부 평활 컨덴서의 유.무와 각각 공급되는 전원을 상용전원인 경우, 상용전원을 정류한 경우, 상용전원을 정류하고 정현파를 AM 변조한 경우에 대해서 측정하였으며, 변조하여 입력되어진 정현파가 빛을 통해서 송신되는 것을 확인할 수가 있었다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.5
• /
• pp.383-388
• /
• 2018

This paper presents a 1.8 GHz six-port-based impedance modulator using CMOS technology, which can select an arbitrary load impedance with switch control. The proposed 1.8-GHz impedance modulator comprises a Wilkinson power divider, three quadrature hybrid couplers, and four SP3T switches for each load impedance selection. The measured insertion loss of -13 dB and the input/output return losses of >10 dB are achieved in the range of 1.4~2.2 GHz. The low drop output regulator for a stable 3.3 V DC power and the serial peripheral interface(SPI) for an easy digital control are integrated. The chip size, including the pads, is $1.7{\times}1.8mm^2$.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.2
• /
• pp.141-146
• /
• 2016

This paper presents a method to improve time interval error for asynchronous communication systems. The proposed method is designed and simulated with multi-phase VCO, interpolator, phase selector, up-down counter, comparator and adder. The simulation results for CAN communication system show that the maximum time interval error can be tightly managed for satisfying the required specification. The proposed frequency modulation method can be properly used for asynchronous communication systems requiring high reliability.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.6
• /
• pp.1061-1068
• /
• 2019

Cooperative networks transmit signals form the source node to the destination node via several relay node where the combining and demodulation of relay aided signals provide the benefit of performance enhancement and data rate increment. In general, a repetitive manner transmission scheme in which the received signal from the source node is amplified/re-generated and forward to the destination node is widely used. In this paper, we analyzed the performance of cooperative networks using the mixed transmission scheme. The conventional modulation scheme is used in the source-relay links, and space-time code is applied in the relay-destination links. To reduce the complexity of the overall system, we adopt differential modulation which bypasses channel state information. We analyze bit error rate (BER) of the proposed system by considering the number of relay nodes, and the performances depending on the strength of transmission signal in the source-relays and rely-destination links are compared. In addition, we also discuss the system performance with the signal strength and the number of relay nodes simultaneously.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.12 no.3
• /
• pp.13-19
• /
• 1975

A detailed analysis has been carried out of a zigzag traveling wave electro-optic laser modulator usin3 CuCl, KDP Crystal. The inclusion of such practical factors as M/W and optical loss results in an optimum design in which modulator dimensions and bandwidth limitation are uniquely determined by optical and M/W dielectic properties of modulating crystal. The main conclusion of the analysis are: (1) CuCl, KDP may be used to produce 50% modulation over bandwidth of 10(GHz) with less than (watt) of modulating power. (2) The upper modulation frequency limit is set by a cutoff frequency which arises from finite width of optical beam.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.9-15
• /
• 2015

A CMOS band-pass delta-sigma modulator(BPDSM) and cascode class-E power amplifier have been developed CMOS for Class-S power amplifier applications. The BPDSM is operating at 1-GHz sampling frequency, which converts a 250-MHz sinusoidal signal to a pulse-width modulated digital signal without the quantization noise. The BPDSM shows a 25-dB SQNR(Signal to Quantization Noise Ratio) and consumes a power of 24 mW at an 1.2-V supply voltage. The class-E power amplifier exhibits an 18.1 dBm of the maximum output power with a 25% drain efficiency at a 3.3-V supply voltage. The BPDSM and class-E PA were fabricated in the Dongbu's 110-nm CMOS process.

• Korean Journal of Optics and Photonics
• /
• v.3 no.1
• /
• pp.27-36
• /
• 1992

Frequency modulation spectroscopy of the super-cavity, of which finesse is app. 40,000 has been demonstrated by using a sigle mode He-Ne laser. In-phase and quardrature components of frequency modulation signals (FM signal) were obtained by using the 1.5 MHz-driven-electrooptic phase modulator. The vector locus of the FM signa in the phase space, which is consisted of in-phase and quardrature components of the FM signal, was observed and analyzed for the dependence of FM signal upon the phase of the reference signal of a phase-sensitive-detector. According to rotating the phase of the reference signal, the vector locus was observed to rotate with the same phase angle as the reference signal. The in-phase component of the FM signals will be used to stabilize the frequency of the He-Ne laser to the resonant frequency of the super-cavity.

• Korean Journal of Optics and Photonics
• /
• v.8 no.3
• /
• pp.250-253
• /
• 1997

The effect of dispersion in optical transmission system changes according to chirp and SPM. Chirp depends on the modulation condition of an external modulator. SPM is proportional to signal power. In this paper, we analyzed the pulse broadening due to SPM and chirp in the system with dispersion by using Split Step Fourier Method and calculated the optimum chirp parameter for 400 km transmission system. Experimental results are presented also.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11B
• /
• pp.1595-1599
• /
• 2001

In this paper, we have desired and implemented of ASK modulator MMIC operating at 5.8 GHz for OBE used in AGPS(Automatic Gate Passing System). The proposed ASK modulator MMIC was implemented to apply a single supply voltage of 3 V to the drain in order to decrease ACP(Adjacent Channel Power). As a result, it is exhibits a broad linear modulation range from 0.7 V to 3 V and an On/off characteristic over 40 dB. The layouts of ASK modulator MMICs was designed and fabricated by using ETRI 0.57m MESFET library The chip size was 1.0mm $\times$x1.0mm.