• Proceeding of EDISON Challenge
• /
• 2012.04a
• /
• pp.29-32
• /
• 2012

변장비의 변화가 사각실린더에 작용하는 유체력에 미치는 영향을 알기 위해 EDISON_열유체를 사용하여 수치해석을 하였다. 낮은 레이놀즈수 영역($100{\leq}Re{\leq}200$)에서 사각실린더의 변장비(W/H)를 0.5, 0.75, 1, 2로 변화시키며 해석을 수행하였고, 레이놀즈수와 변장비에 따른 스트로할수(St), 항력계수($C_D$), 양력계수($C_L$)를 비교하였다. 본 논문에서는 레이놀즈수와 실린더의 변장비가 스트로할수, 항력계수, 양력계수에 미치는 영향을 알아보는 데 중점을 두었다. 해석결과 레이놀즈수가 증가하고 변장비가 감소할수록 스트로할수, 항력계수, 양력계수가 증가하는 것을 확인하였다. 본 논문을 통해서 레이놀즈수와 사각실린더의 변장비가 사각실린더에 작용하는 유체력에 영향을 미친다는 것을 알 수 있었다.

• Proceeding of EDISON Challenge
• /
• 2012.04a
• /
• pp.73-76
• /
• 2012

변장비의 변화에 따른 타원형 실린더 주위의 유동장을 해석하기 위하여 Navier-Stokes 방정식을 사용한 EDISON 열유체 툴로 분석하였다. 본 논문은 기존의 연구와 비교 분석하는데 목적을 두었으며, 기존의 연구결과와 비교 분석하기 위하여 계산 영역을 동일하게 설정하였다. 타원형 실린더의 변장비를 0.5, 1, 2, 4로 변화시키고 레이놀즈수 200, 400, 1000인 조건하에 유동장을 해석하였다. 본 연구의 해석 결과를 통해 선행연구와 전체적인 경향이 같다는 것을 알 수 있었고, 또한 변장비와 레이놀즈수는 항력진폭과 양력진폭, 스트로할 수에 영향을 미침을 알 수 있었다.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.1 s.74
• /
• pp.23-32
• /
• 2005

In this paper, the modified coefficient of the orthotropic rigidity for stiffened plates with open ribs is proposed to improve the inaccurate results of the orthotropic plate analysis. For stiffened plates with rectangular and angle ribs having various aspect ratios and boundary conditions, the aspect ratio and the rigidity ratio are selected as parameters and the parametric study on the modified coefficient is performed. Analyzed results of stiffened plates modeling with the isotropic and orthotropic plate element show that the modified coefficient can be expressed as a function of the rigidity ratio for each rib space regardless of the aspect ratio in case of the aspect ratio under 1 and can be represented as a single union function without regard to rib spaces and aspect ratios in the other case. The results also shows that the effects of the boundary condition on the modified coefficient is small and coefficient functions have different values according to rib shapes. The application to examples shows that the modified coefficient of the orthotropic rigidity improves accuracy. Therefore, the orthotropic plate analysis of stiffened plates with open ribs can easily achieve more accurate results using the coefficient function proposed in this study

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.10a
• /
• pp.549-556
• /
• 2002

주변이 Kinney의 정의에 따른 부분 고정도를 가지고 지지된 직4각형 평판이 부분 분포하중을 받고 있을 때의 안정해석을 유한 요소법으로 수행하였다. 수치해석에서 고려한 변수는 평판의 변장비 (=λ)와 부분 분포하중 작용폭 (=γ) 및 부분 고정도 (=f) 값이다. 여기서 특히 f=0.0 은 주변이 단순지지를 표시하고 f=1.0은 고정지지를 뜻하는데 수치해석에서는 f=0.0, 0.2, …, 1.0으로 변화시켰다. 유한 요소법으로 산정한 판의 좌굴계수 변화는 각각의 변장비에 대하여 나머지 두 개의 매개변수를 변랑으로 하는 대수 함수식으로 표시하였다. 제안한 대수식으로 추정한 임계하중치와 유한 요소법으로 산정한 임계하중치 간의 상관계수는 모든 변장비에 대하여 거의 단위치 (ρ=1.0)에 가까웁다. 따라서 제안한 대수 함수식은 구조 설계자들의 판 설계 및 안정 검토시에 유익한 자료로 이용될 수 있다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.375-382
• /
• 2019

In this study, an experimental study on the buildability of the structure using the developed printing materials and equipment was performed. Experimental variables included the moving speed of nozzles(=80 and 100mm/s), the revolutions per minute (RPM) of screw in discharge buckets, and the aspect ratio(=1.67 and 5.00) reflecting wall length of the structures. Buildability of the 3D printed concrete structures was analyzed based on the maximum decomposition layer and collapse patterns of the structures according to the experimental variables. The nozzle movement speed of 80mm/s and the aspect ratio of 1.67 were favorable for 3D printing in this study. The collapse process of structure due to uneven layer decomposition was also analyzed through the relative displacement measurement of the lower part of the structure during printing.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.3
• /
• pp.25-30
• /
• 2011

Flow control of flow field is essential to design efficient elements relating to fluid machineries. In this study, flow characteristics of rectangular prism with center gap through-flow at different aspect ratio was investigated to flow control. It was used a FLUENT 6.3 version to study flow field. It was found that the through-flow disturbs the development of vertical velocity component and decreased the vortex size and critical value of a rapid change in pressure coefficient distribution.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3A
• /
• pp.241-256
• /
• 2010

This study intends to develop an aerodynamic girder for suspension bridge with width corresponding to 1/70 of the main span length. In the first step of present study, parametric study for the effects of major structural properties on aerodynamic stability of bridges was performed. The span length and natural frequency of bridges were found to be free from girder width, girder height, and aspect ratio of width to height. The empirical equation according to confidence interval was proposed to estimate the natural frequencies of bridges from span length. From the sensitivity analysis, it was revealed that the torsional frequency was dominant parameter among various structural properties that affected flutter velocity mostly. The final aerodynamic bridge section which satisfied the flutter criteria was found from section wind tunnel tests for 30 cross sectional models. The aerodynamic stability of the developed cross section was verified by multimode flutter analysis. The present economical cross section can be used for long span suspension bridge.

• The Journal of the Korea Contents Association
• /
• v.19 no.5
• /
• pp.542-552
• /
• 2019

This study aimed to analyze characteristics of employment and factors affecting of employment of person with Brain disorder. Participants were 317 individuals with brain disorders. Data were analyzed using Chi-square test, regression analyses. according to the Panel Survey of Employment for the Disabled in Korea. These factors were classified into disability and health factors, employment related factors, and household related factors. First, The employment group showed significantly severe disorder, higher health status, absent of daily life helper, absent of assistive devices, higher level education, licenses, public employment service, job arrangement of acquaintance, find a job oneself, married, absent of basic living security assistance, greater supports of family compared to the unemployed group. Second, Factors affecting employment of individuals with brain disorders included daily life helper, education level, job arrangement of acquaintance, married, basic living security assistance. Base on these results, developing dailylife and education system and social supported system and modifying the benefit system can promote employment acquisition of individuals with brain disorder.

• The magazine of the Korean Society for Advanced Composite Structures
• /
• v.5 no.3
• /
• pp.10-14
• /
• 2014

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.3
• /
• pp.285-292
• /
• 2016

In this study, FE-BE direct coupling methods of 1D and 2D problems are considered for the pontoon-type floating structure and the difference of the modeling dimensions is investigated for the hydroelastic response. The modeling dimensions are defined as the 1D problem consisting 1D beam-2D fluid coupling and the 2D problem consisting 2D plate-3D fluid coupling with zero-draft assumption. For case studies, hydroelastic responses of the 1D Problem are compared to those of the 2D Problem for a wide range of aspect ratio and regular waves. It is shown that the effects of the elastic behavior are increased by decreasing the incident wavelength, whereas the effects of the rigid behavior are increased by increasing the incident wavelength. In 2D problem, the incident wave angle can be considered, and slightly more accurate results can be obtained, but the computational efficiency is lower. On the other hand, in 1D problem with plate-strip condition, the incident wave angle cannot be considered, but when the aspect ratio is large, the overall responses can be analyzed through a simplified model, and the computational efficiency can be improved.