• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.12 no.2
• /
• pp.87-95
• /
• 2000

Spectral wave models are applied to the area of Kyung-gi bay with two different combinations. One combination assumes a constant tidal elevation over the whole region when applying the wave model to the area. In this case no tidal currents exist in any place. The other combination employs tide model as well as wave model so that tidal condition is defined at every computation time when wave modelling is carried out. Significant wave heights and wave directions are shown for these two cases. With these two different constraints of tidal variation, the results are checked and compared with each other. Both results are found significantly different from each other.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.4
• /
• pp.316-323
• /
• 2011

Purpose: The purpose of this study was to investigate the effect of different thread designs on the marginal bone stresses around dental implant. Materials and methods: Standard ITI implant(ITI Dental Implant System; Straumann AG, Waldenburg, Switzerland), 4.1 mm in diameter and 10 mm in length, was selected as control. Test implants of four different thread patterns were created based on control implant, i.e. maintaining all geometrical design of control implant except thread pattern. Four thread designs used in test implants include (1) small V-shape screw (model A), (2) large V-shape screw (model B), (3) buttress screw (model C), and (4) trapezoid screw (model D). Surface area for unit length of implant was 14.4 $mm^2$ (control), 21.7 (small V-shape screw), 20.6 (large V-shape screw), 17.0 (buttress screw) and 28.7 $mm^2$ (trapezoid screw). Finite element models of implant/bone complex were created using an axisymmetric scheme with the use of NISA II/DISPLAY III (Engineering Mechanics Research Corporation, Troy, MI, USA). A load of 100 N applied to the central node on the crown top either in parallel direction or at 30 degree to the implant axis (in order to apply non-axial load to the implant NKTP type 34 element was employed). Quantification and comparison of the peak stress in the marginal bone of each implant model was made using a series of regression analyses based on the stress data calculated at the 5 reference points which were set at 0.2, 0.4, 0.6, 0.8 and 1.0 mm from implant wall on the marginal bone surface. Results: Results showed that although severe stress concentration on the marginal bone cannot be avoided a substantial reduction in the peak stress is achievable using different thread design. The peak marginal bone stresses under vertical loading condition were 7.84, 6.45, 5.96, 6.85, 5.39 MPa for control and model A, B, C and D, respectively. And 29.18, 26.45, 25.12, 27.37, 23.58 MPa when subject to inclined loading. Conclusion: It was concluded that the thread design is an important influential factor to the marginal bone stresses.

• Korean Journal of Microbiology
• /
• v.32 no.1
• /
• pp.70-77
• /
• 1994

The author isolated 7 mutant candidates which mapped around cysA (which was 10 o'clock). They were divided into two groups. One of them was located counterclockwise to cysA, and the other was clockwise to cysA. Since bldA was mapped counterclockwise to cysA, the candidate which mapped counterclockwise to cysA was transduced with phage containing wild type bldA gene clone. The candidates might be the alleles of bldA, because they were complemented by bldA clone. However some of such mutants sporulated very well and developed as much pigment as wild type on rich media plate. Their phenotype was not like bld mutant at all on such conditions. There were real antibiotics gene expressions, since transcriptional reporter gene xylE had shown high activities. Majority of the bldA like mutants showed act gene expressions when they were transformed with high copy number plasmid containing actII-ORF4.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.1
• /
• pp.122-127
• /
• 1983

Germination and seedling emergence of 40 barley cultivars and lines having been bred in Korea were studied under different water and salt stress conditions containing different sucrose and KC1 concentration in laboratory at Suweon. This study revealed that the barley cultivars and lines differed markedly in their emergence rate index(ERI), total stand(TS), coleoptile length, seedling height, top and root weight. Those characters of the most cultivars were progressively reduced as water and salt stress increased. Jogangbori, Dongbori 1, SB 77460 and SB 77415 were less sensitive to both stress and will be useful for breeding sources. ERI was highly correlated with TS, coleoptile length and seedling height. ERI and TS between two different solutions were correlated each other, and this study indicated that for screening the varieties or lines tolerant to water and salt stress, both ways were available and should be screened genetic materials with a good germination and emergence rate in I stress conditions.

• Magazine of the Korea Concrete Institute
• /
• v.9 no.5
• /
• pp.217-224
• /
• 1997

매스콘크리트의 타설시 온도이력을 정확히 예측하기 위해서는 재령별로 민감하게 변하는 시공 및 주변 환경요인을 엄밀히 반영하여 온도이력을 합리적으로 해석하는 것이 필요하다. 본 연구에서는 시공시에 발생되는 주변환경조건을 고려한 상태에서 온도이력을 해석할 수 있도록 개발된 해석프로그램을 이용하여 주변환경조건에 대한 수치실험을 수행하고자 한다. 수치실험의 목적은 매스콘크리트 타설시 각종 인자가 매스콘크리트의 온도이력에 미치는 영향정도를 정량적으로 파악하여 실제 매스콘크리트의 설계 및 시공시 사전에 콘크리트의 온도이력을 예측하여 효율적으로 관리하는데 있다. 수치실험을 수행한 결과주어진 구조물의 설계조건에 부가하여 타설시기, 타설온도,거푸집조건 및 제거시기, 양생 및 개기온도 등의 시공시 주변환경조건의 영향이 대단히 민감하게 작용하는 것으로 나타났다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.427-430
• /
• 2009

풍력 터빈 블레이드용 익형의 경우 운용 조건에서 높은 양항비를 가지도록 설계되나 풍속, 풍향의 변동에 의해 운용조건에 변화가 발생할 경우 성능의 저하가 발생할 수 있다. 따라서 운용조건의 변동이 발생하더라도 공력 성능이 크게 변하지 않는 익형이 요구된다. 본 연구에서는 이러한 운용조건의 불확실성을 고려하여 풍력 터빈 블레이드용 익형의 신뢰성 기반 강건 최적 설계를 수행하였다. 익형 설계를 위해서 여러 익형 형상 변수들을 고려할 수 있는 익형 모델링 함수를 정의하였고 기저형상으로는 NREL에서 개발한 S809 익형을 사용하였다.

• Applied Biological Chemistry
• /
• v.46 no.4
• /
• pp.305-310
• /
• 2003

Hydrophobic core variant of ubiquitin appeared to have partially folded structure at pH around 2. The intrinsic tryptophan fluorescence emission maximum of this ubiquitin variant at pH 2 showed slight blue shift compare to that of unfolded state, suggesting that some residual tertiary structures remain in this solvent condition. At the same solvent condition, this ubiquitin variant binds with hydrophobic dye, 8-anilinonaphthalene-1-sulfonic acid(AMS), which is known to bind to exposed hydrophobic surface. Furthermore, far-UV circular dichroic spectrum of this ubiquitin variant in the diminished pH was remarkably different from the far-UV CD spectrum of the native state or unfolded state. Based on the molar ellipticity at 220 nm, this ubiquitin variant at pH 2 appeared to have significant amount of secondary structures. All these observations suggest that this ubiquitin variant in the diminished solvent pH has loosely folded hydrophobic core with some secondary structures, which are key features of molten globule conformation. Since molten globule has long been considered as a protein folding intermediate, it is considered that this hydrophobic core variant ubiquitin will serve as a valuable model to study protein folding process.

• Computational Structural Engineering
• /
• v.3 no.2
• /
• pp.67-75
• /
• 1990

A stepped beam with immovable ends under the free and forced vibrations with large amplitude is investigated by using the finite element method to show the effects of longitudinal displacement, shear deformation and rotary inertia. A modified harmonic force matrix is introduced for analysis of finite amplitude vibration of the stepped beam under uniform harmonic loading and a beam under nonuniform harmonic loading. Numerical examples are analysed for deflections and natural frequencies of stepped beam under various support conditions. Results show that the proposed method is valid and efficient.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.3
• /
• pp.85-91
• /
• 1984

This paper is a study on the determination of plane coordinates by observing only the distance with EDM (Electromagnetic Distance Measuring instrument). The advent of EDM has made a precise measurements of long distance be possible, therefore many studies on trilateration were made. It is the object of this study to investigate the error distribution of trilateration according to the changing distance and the geometric figure.

• Annual Conference of KIPS
• /
• 2012.11a
• /
• pp.1728-1731
• /
• 2012

본 논문에서는 부모 개체의 해밍 거리에 기반하여 선택적 변이연산을 적용한 유전알고리즘을 제안한다. 유전자 형이 매우 유사한 개체들 간의 유전연산은 알고리즘의 탐색성능을 저하시키고 조기 수렴의 가능성을 증가시킨다. 본 논문에서는 이러한 현상을 극복하기 위하여, 교차연산 시 선택된 두 부모 개체간의 해밍 거리에 따라 그 값이 낮으면 교차연산 후 생성된 두 자식 개체 중 한쪽에게 높은 변이확률을 적용하고 다른 한쪽 자식은 부모와 비슷한 유전자 형으로 탐색을 계속하게 하여 조기 수렴을 방지하면서 해집단의 다양성 유지 기능을 향상 시켰다. 제안한 유전 알고리즘을 다차원 배낭 문제에 적용한 결과, 같은 조건에서 단순 유전 알고리즘(SGA) 보다 향상된 탐색 성능을 보여주었다.