• Journal of the Korean Geotechnical Society
• /
• v.32 no.6
• /
• pp.5-16
• /
• 2016

In the geosynthetics-reinforced piled embankment the effects of soft soil stiffness, friction angle of the fill material, tensile stiffness of geosynthetics, and height of the embankment on the load transfer soil arch measured by the critical height were numerically investigated. Results from parametric studies show that the magnitude of the soft soil stiffness is the most influencing factor on the critical height. The contour charts of the critical height with respect to the combination of the soft soil stiffness and other parameters were presented. The charts show that the critical height sensitively varies with the combination of the soft soil stiffness and the height of embankment. Under the sufficiently low stiffness of soft soil, the critical height sensitively varies with the friction angle of the fill material. Once the geosynthetic layer is placed, however, the magnitude of the tensile stiffness of the geosynthetic layer hardly influences the critical height of the soil arch.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.3
• /
• pp.457-476
• /
• 2016

This was investigated on the major issues and research trends regarding the heat-treatment of woods through literature reviews. The principal heat-treatment technologies utilized for industrial purposes include the Plato-process (Netherlands), the Retification process (France), the OHT-process (Germany), and the Thermowood Process (Finland). Factors that mainly influence the heat-treatment process are the wood species, process temperature, processing time, and the heating medium (air, steam, vacuum, N2, oil, etc.). Researches on investigating the optimal conditions with these process conditions being the variables stand as the mainstream. Heat-treated woods present dimensional stability improvement, but mass loss and strength reduction, a wide variations for decaying inhibition, and insufficient resistance against mold, wood borer, and termites. For further improvement in respects of durability or resistance to biological degradation, necessity to search for more suitable heat treatment process and processing conditions fit for each wood species has been suggested. Exploiting new ways to utilize heat-treated wood and extending its range of use have been considered to be important matters that need more effort put into for the sustainable and sound environment as well as saving the wood resources.

• The Korean Journal of Mycology
• /
• v.19 no.2
• /
• pp.120-127
• /
• 1991

Several isolates producing the red-pigment were isolated from the Korean and Brazi­lian soils. The pigment producton by the molds belongs to a genus Monascus was investigated under the submerged culture. Mutagenesis of Monascus sp. KS 2 as the highest pigment production by NTG was made to increase pigment production. This mutant was examined to produce red and yellow pigment with 2.4 and 1.6 times higher than the parental isolates, respectively. The optimal cultural conditions for the pigment production by this mutant were: pH 6.0 , temperature $30^{\circ}C$, rice powder 5%, and monosodium glutamate 0.15%.

• Journal of Navigation and Port Research
• /
• v.36 no.5
• /
• pp.379-385
• /
• 2012

In this paper, the stability and stabilization problems for marine vessels including surface and underwater vehicles are described. In the marine vessels, there are many and strong nonlinear parameters. These give hard design process and difficulties to us. In this article, at first we make a descriptor system representation as a controlled system to preserve the physical parameters of the system as it is. And we propose a new stability and stabilizability conditions based on the quadratic stabilization approach which gives a solution for the unreasonable problems produced by added mass. That is, the proposed conditions are not interfered with the nonsymmetric matrix constraint. And the stability condition is given by an matrix inequality such that it makes us to obtain a solution easily for something.

• Korean journal of applied entomology
• /
• v.37 no.2
• /
• pp.127-135
• /
• 1998

To study overwintering biology of the oriental tobacco budworm (OTB), Helicoverpaa.ssulta, OTB larvae were collected from middle and southern region of Korea in the autumn and rearedto diapausing pupae. Diapausing pupae were held at two different locations (Suwon and Chinju) and wererecollected in the spring to observe adult emergence rate and duration to adult emergence at 25$^{\circ}$C. Thesurvivorship of overwintering pupae was less than 5% when the pupae were buried in the soil in 20cmdepth. However, more than 60% of the pupae survived when they were kept in the plastic cup withartificial diet and were buried in the soil. The mean developmental periods of overwintering pupae at 25"C varied from 20.4 days to 43.9 days depending on years and locations where larvae were collected andpupae were held. The proportion of individuals which required longer than 30 days for development washigher in the population from the middle regions than those of southern regions. However, the proportiondecreased when the pupae collected from middle regions were held at Chinju, southern region. Chinju, southern region.

• Microbiology and Biotechnology Letters
• /
• v.31 no.4
• /
• pp.395-399
• /
• 2003

Nebramycin is a complex of aminocyclitol compounds that is produced by aerobic culture in fermentation process. The major antibiotic factors produced by Streptoalloteichus hindustanus are nebramycin factor 2, 4, 5'and kanamycin A. A mutant was selected, producing nebramycin factor 5' activity 16.4 times higher than parent strain by microbiological assay using Pseudomonas aeruginosa CH-U34AF. The component ratio of nebramycin factor 5' was dramatically increased from 34% to 70% by the optimization of fermentation condition. It was found that the component ratio of nebramycin factor 5' in fermentation was especially affected by the oxygen transfer rate. Optimum oxygen transfer rate for maximal nebramycin factor 5' productivity and ratio during S. hindustanus fermentation was elucidated to $0.50 mMO_2$/min.

• Journal of Life Science
• /
• v.16 no.1
• /
• pp.1-5
• /
• 2006

This study investigated the optimal conditions of high yield production of cyclofructan (CF) using recombinant deletion mutant enzyme CFT108 which is constructed by N-terminal deletion from cycloinulooligosaccharide fructanotransferase (CFTase) gene of Penibacillus polymyxa. The production yield was dependent on reaction time, substrate concentration and enzyme concentration. The optimum reaction time for industrial purpose was achieved at 3 hr reaction. The optimal concentrations of substrate and enzyme were found to be $2\%$ inulin and 40 unit/ g inulin, respectively. At optimum condition, 9.5 g/l of maximum yield and $47.5\%$ of conversion efficacy were achieved. For purification of CF produced, the reaction mixture was treated with 1 unit/ml exoinulinase and then added $3\%$ CaO three times with blowing $CO_2$ gas, resulted in $95\%$ purity.

• Applied Biological Chemistry
• /
• v.39 no.3
• /
• pp.165-171
• /
• 1996

The rheological properties of biopolymers produced by Bacillus sp. K-1 and its mutant strains(KM-21, KM-83) were studied. Apparent viscosity of biopolymers decreased as rising the temperature. The biopolymer produced by KM-21 strain showed 1.7 times low viscosity, 2.7 times low viscosity by K-1 and 1.9 times low viscosity by KM-83 at $80^{\circ}C$ compared with at $20^{\circ}C$ respectively. The viscosity of biopolymer solution also increased with increasing the polymer concentration and showed pseudoplastic characteristics which is high temperature dependency in all concentration. The change of the biopolymer viscosity on the pH showed the highest value at the pH 7.0 and it showed lower at acidic condition than at alkaline condition comparatively.

• Applied Biological Chemistry
• /
• v.23 no.4
• /
• pp.246-250
• /
• 1980

The effects of two Cytozyme complexes, Crop Plus and Seed Plus, applied to rice (variety: Jinheung) were evaluated during the 1980 rice growing season. Primary objectives were directed to determine the effects of rates, timing and method of application of the products on the yield of rice. For the Seed Plus test, seed was soaked in the diluted Seed Plus solution(1 : 100) for 24 hours just prior to sowing. The Crop Plus was diluted to 1 : 12 for seedling treatment. Seedling roots were immersed in the diluted solution for 3 hours before transplanting. Crop Plus spray applied at the rates of 450ml/ha or 900ml/ha when rice plants were in the panicle initiation, heading or tillering stage respectively to compare the effects of rates and timing of application. The weather was not favorable for rice growth during the growing season except the tillering stage. The foliar spray at the tillering stage was more effective than the spray at the panicle initiation, and the rates of 900ml/ha showed better results than 450ml/ha. Combination of seed treatment and foliar spray increased grain yield by 16% over untreated control plots.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.8 no.2
• /
• pp.83-93
• /
• 2004

In this study. the Modified Response Displacement Method(MRDM) for seismic design of underground box-type structures is proposed. Firstly, to investigate the applicability of the conventional RDM, various parametric studies are performed according to buried depth and soil conditions. Results from the conventional RDM are compared with those of time history analysis in terms of the maximum bending moment and relative displacement. The comparison shows that the velocity response spectrum and the determination method of foundation modulus which significantly influence the accuracy of RDM should be modified. Thus, the modified velocity response spectrum and the new determination method of foundation modulus are proposed under consideration of domestic conditions. In order to demonstrate the accuracy and validity of the proposed MRDM numerical analyses are performed according to different parameters such as depth of base rock, height and width of box, buried depth and soil condition. the comparison with the results of the time history analysis verifies the feasibility of the proposed MRDM for the seismic analysis.