• Journal of Environmental Impact Assessment
• /
• v.28 no.3
• /
• pp.332-345
• /
• 2019

The purpose of the study is to evaluate the treatability of contaminated groundwater with TPH and (or) $Cr^{6+}$. Laboratory scale tests were performed for oil/water separation, dissolved air flotation (DAF), coagulation and precipitation, and filtration with sand and activated carbon respectively. Two times of oil/water separation tests for total 40 minutes of separation or separating time shows 90.2 % of TPH removal rate. In case of DAF test for high TPH sample, the TPH removal rates were not varied significantly by the variation of microbubble size. However, tests for low TPH samples show that TPH removal rate increases as microbubbles are smaller. When coagulant was added to sample for DAF test, TPH removal rate was increased 12.3 %. SS removal rate by DAF was 97.9 % at $16-40{\mu}m$ and it was increased as the size of microbubble is reduced. Tests for coagulation and precipitation were performed to evaluate the removal of $Cr^{6+}$ in groundwater. The increase of $FeSO_4$ dosage increased $Cr^{6+}$ removal rate in the coagulation and precipitation process. As the amount of activated carbon in the filter media increased TPH removal rate in the filtration process. SS removal rate by the filtration was 96.7 % similar to the results of DAF process tests. The filtration process treats TPH and SS. Best design parameters are determined as the size of sand is $425-850{\mu}m$ and the ratio of activated carbon and sand is 50:50.

• Korean Journal of Cognitive Science
• /
• v.30 no.2
• /
• pp.85-104
• /
• 2019

Past research showed that presence of others induces morally desirable behavior and stricter judgments. That is, presence of others makes people become a moral being. On the other hand, little research has been conducted to test what effects facial expression of others have on moral judgments. In this research, we tested the effects of emotion exposed by facial expression on moral judgments. To this end, we presented descriptions of immoral or prosocial behavior along with facial expression of various emotions (in particular, disgust and happiness), and asked participants to make moral judgments on the behavior in the descriptions. In Experiment 1, facial expression did not affect moral judgments, but variability of judgments was increased when descriptions and facial expression were incongruent. In experiment 2, we modified potential reasons of the null effect and conducted the experiment using the same procedure. Subjects in Experiment 2 made stricter judgments with disgust faces than with happy faces for immoral behavior, but the effect did not occur for prosocial behavior. In Experiment 3, we repeated the same experiment after having subjects to consider themselves as the actor in the descriptions. The results replicated the effects of facial expression in Experiment 2 but there was no effect of the actor on moral judgments. This research showed that facial expression of others specifically affects moral judgments on immoral behavior but not on prosocial behavior. In general discussion, we provided further discussion on the results and the limitations of this research.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.2
• /
• pp.139-150
• /
• 2019

This study is investigated sunscreen formulation that enhances UV absorption efficiency by UV light. Ethylhexyl methoxycinnamate (OMC) is one of the most common UV filters. Many studies have been conducted about photostability of OMC. It is well known that under the UV exposure, trans-OMC could turn to cis-OMC, or produce various photoproducts including its dimers. Those chemical structure changes were understood as the reason of a decrease in UV absorption efficiency upon UV exposure. However, it was found that OMC and isoamyl p-methoxycinnamate (IMC) could even enhance its UV absorption efficiency when it was exposed to UV light in an environment similar to actual use. In order to develop sunscreen formulation that enhances UV absorption efficiency by UV light, emollient with high polarity and compatibility should be avoided from the formular. Those emollient seemed to prevent OMC or IMC from producing photoproducts under UV light. Finally, a sunscreen formulation (UV sensing SPF boosting formular) enhancing UV absorption efficiency by UV was developed by the UV activated SPF boosting technology, and the effect of the sunscreen was evaluated. in vitro SPF of the sunscreen was increased from 50.69 to 72.33 when it was exposed to UV light and its in vivo SPF (53.7) was 56.10% higher than that of the control sunscreen (below 34.4).

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.3
• /
• pp.157-165
• /
• 2019

Recently, large and small earthquakes have occurred in the Korean peninsula. In this sense, Korea is no longer considered as an earthquake free zone. Especially, it is necessary to respond quickly to earthquake tsunami which may be caused by the influence of neighboring countries with large earthquakes. Since the occurrence of tsunamis can cause great casualties, it is very important to allocate the location of the shelter in case of an earthquake. Although many researches on shelter allocation have been conducted in various ways, but most of them have been analyzed based on administrative district resident data, resulting in a lack of reality. In this study, floating population data were used to reflect reality in case of emergency situations, and genetic algorithm, which produce good results among the heuristic algorithms, was used to select shelter locations. The number of evacuees was used as a objective function of genetic algorithm and the optimal solution was found through selection, crossover and mutation. As a result of the research on Busan Haeundae-Gu, selected as a research area, allocating eight shelters was the most efficient. The location of the new shelters was selected not only in residential areas but also in major tourist areas whose results can not be derived from administrative district resident data alone, and the importance of utilizing the floating population data was confirmed through this study.

• Journal of Life Science
• /
• v.29 no.6
• /
• pp.637-644
• /
• 2019

This study was conducted to analyze the genetic characteristics of the Jeju dog for preservation and protection. A total of 139 dogs from 7 dog breeds, including the Jeju dog, were genotyped using 16 microsatellite markers. The results revealed 2-18 alleles per locus, with a total of 131 alleles among the 16 markers. Most alleles were identified for FH3381, which had 18 alleles, whereas FH2834 had the fewest alleles, with just 2. When the total mean value was observed, the expected heterozygosity and observed heterozygosity were higher for than for outgroup dogs, and the PIC values ranged from 0.000 to 0.862, respectively. The phylogenetic tree analysis of the Jeju dog and other dog varieties revealed that the Jeju dog is closest to the Sapsal dog (0.393). The phylogeny between the Jeju and Korean domestic dogs showed that the Jeju dog is most distant from the Dongkyung dog (0.507). Looking at the distribution individually, the Jeju dog is in the same group as the Labrador Retriever and the Sapsal dog. Meanwhile, the Poongsan, Dongkyung, and Jindo dogs and the German Shepherd were in the same group. Genetic information confirmed through the results of this study can be used as basic data to study the genetic characteristics of the Jeju dog.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.259-267
• /
• 2019

The purpose of this study is to examine the inner side of those who raise the children, that is, the mothers, through the satisfaction with the parental roles and the child-rearing stress of them, with a view to emphasize the importance of an alternative for the mothers to cope with child-rearing stress and enhancing their satisfaction level with their role as a parent as well as the importance of social support in order to enhance the quality of rearing. For this purpose, the researcher conducted a survey with 312 mothers with preschool children of age 4 to 7 in Seoul and Gyeonggi Area from October 1, 2018 to October 15, 2018. To analyze the data, the researcher conducted frequency analysis, exploratory factor analysis, confirmatory factor analysis, confidence analysis, correlation analysis, structural equation model, and Sobet-test, using SPSS 22.0 and AMOS 22.0. The results of the analyses showed that social support and satisfaction with the parental role were significantly influenced by child-rearing stress, while social support influenced the satisfaction with the parental role significantly. Also, it turned out to have a mediating effect in the relationship between the mother's child-rearing stress and the satisfaction with the parental role. Based on these findings, the study highlights that the social network that is connected with the mothers may function to reduce the negative influence of child-rearing stress on the satisfaction with the parental role when the social network channels appropriate support, tangible assistance, appealing of difficulties, and encouragement.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.447-455
• /
• 2019

When constructing LNG storage structures using the cast-in-place method in extreme areas, the construction cost and time may be increased due to the poor working environments and conditions. Therefore, demand for modular energy storage tanks is increasing. In this study, we propose using an SCP module as an alternative for lighter-weight LNG storage tanks. The purpose of this study is to evaluate the feasibility of LNG storage outer tanks by performing bending tests on the thickness of composite steel plate concrete under field conditions. The loads on specimens with thicknesses of 100 mm and 200 mm were linearly increased to the design final loads of 413 kN and 822 kN, respectively. The slope was rapidly changed, and fracture occurred. The two test conditions showed linear behavior until the steel plate yielded, and after an extreme load behavior, sudden yielding of the steel plate yield occurred in the SCP bending test according to the INCA guidelines. The results satisfied the design flexural load and showed the possibility of using the specimens in a modular LNG outer tank. However, it is necessary to evaluate the structural performance of the SCP by performing compression and shear tests in future research.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.2
• /
• pp.107-113
• /
• 2019

In this paper, a robust filter based wind velocity estimation algorithm without an air velocity sensor in an air vehicle is presented. The wind velocity is useful information for the air vehicle to perform precise guidance and control. In general, the wind velocity can be obtained by subtracting an air velocity which is obtained by an air velocity sensor such as a pitot-tube, and a ground velocity which is obtained by a navigation equipment. However, in order to simplify the configuration of the air vehicle, the wind estimation algorithm is necessary because the wind velocity can not be directly obtained if the air velocity measurement sensor is not used. At this time, the aerodynamic coefficient of the air vehicle changes due to the turbulence, which causes the uncertainty of the system model of the filter, and the wind estimation performance deteriorates. Therefore, in this study, we propose a wind estimation method using $H{\infty}$ filter to ensure robustness against aerodynamic coefficient uncertainty, and we confirmed through simulation that the proposed method improves the performance in the uncertainty of aerodynamic coefficient.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.121-130
• /
• 2019

Automobile insurance medical expenses increased by 12% in year 2015 compared to year 2014. But the oriental medical service expenses in automobile insurance increased by 36% during the same period. In this paper the reason for the rapid increase of expenses for oriental medical service was analyzed using the method of decomposing medical expenses. As a result of analyzing 34,351,120 cases that were examined and completed during the period of 2014~2015, the number of oriental medicine patients increased by 27% and the medical expense per patient increased by 7%. The result of analysis showed that there was no significant change in service period per patient but medical expense per day increased by 7%. The increase in the number of patients receiving only oriental medical services was 32%. Increase in the number of patients receiving medical treatment and oriental medical services was 24% and the number of patients receiving medical treatment only decreased by 4%. There was significant increase in non standardized cost of oriental physical therapy which was one reason of the increase of the expenses. However, the most influential factor of the increase in the expenses of oriental medical services was the increase of the number of patients.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.2
• /
• pp.69-79
• /
• 2019

The coastal area forms various sedimentary layers according to the environmental conditions such as the topography and geological features of the upper region of the river, ocean currents, and river mouth. Therefore, identifying the characteristics of the marine clay deposited in the coastal area plays a key role in the investigation of the formation of soft ground. In general, alluvial grounds are formed by a variety of factors such as changes in topography and natural environment, they have very diverse qualities depending on the deposited region or sedimentation conditions. The most important thing for the construction of social infrastructures in soft ground areas is economical and efficient treatment of soft ground. In this study, the author collected data from diverse laboratory and field tests on five areas in western and southern offshore with relatively high reliability, and then statistically analyzed them, thereby presenting standard constants for construction design. Correlation between design parameters such as over consolidation ratio, preconsolidation pressure was analyzed using linear and non-linear regression analyses. Also, proposed distribution characteristics of design parameters in consideration of each region's uncertainty through statistical analyses such as normality verification, outlier removal.