• Korean Journal of Optics and Photonics
• /
• v.9 no.5
• /
• pp.277-281
• /
• 1998

One dimensional inhomogeneous aperture modulation effects on the MTF of optical system was investigated. The lens under test was a doublet made in Korea. It has 10 mm effective diameter, 87.8 mm effective focal length. The ray-fans and spot diagrams were calculated and presented on the picture for on-axis and off-axis (field of view, $1^{\circ}$ and $2^{\circ}$). Aperture modulation was carried out by positioning a aperture modulator close contacter with the lens under test. We bought two modulators from Edmud Company in U.S.A. One was linear type and the other was stepped type. The MTFs were measured on the best of focus for each modulated aperture where the MTF has the highest value for 60 line/mm and were compared with one another. For on-axis, the MTFs of some modulated apertures had higher values than the MTF of unmodulated aperture in the high frequency region. In the case of off-axis, at the field of view $1^{\circ}$, the MTF values of some modulated aperture are improved prominently and some other one are disimproved. At the field of view $2^{\circ}$ most of the MTFs of modulated apertures had lower values than the MTF of unmodulated aperture except the MTFs of linear and inverse linear type aperture in the high frequency area. But the values of MTFs in high frequency region were too low for actual use.

• Korea journal of population studies
• /
• v.32 no.1
• /
• pp.139-164
• /
• 2009

The first demographic transition refers to the historical decline in mortality and fertility, as shown from the 18th Century in several European populations, and continuing present in most developing countries. The end point of the first demographic transition(FDT) was supposed to be a stationary and stable population corresponding with replacement fertility and zero population growth. In addition, households in all parts of the world would converge toward the nuclear and conjugal types, composed of married couples and their offspring. The second demographic transition(SDT), on the other hand, sees no such equilibrium as the end-point. Rather, new developments bring sub-replacement fertility, a multitude of living arrangements other than marriage, and the disconnection between marriage and procreation. Populations would face declining sizes if not complemented by new migrants. Over the last decades birth rates have been on the decline in all countries of the world, and it is estimated that already more than half of he world's population has below replacement level fertility. Measured in terms of the Total Fertility Rate (TFR), currently 34 countries have fertility levels of 1.5 or less. Similarly, Korea has been below lowest-low fertility for eight consecutive years since 2001 and below the replacement level for more than twenty years. In explaining the low fertility in Korea, some researchers explain the low fertility as revenge against a male-dominated society and institution, while others focus the impact of the employment instability. These studies share the basic ideas (spread of individualism, delayed marriage and childbearing, high divorce rate etc.) of a second demographic transition in order to explain the low fertility in Korea.

• Research in Plant Disease
• /
• v.9 no.1
• /
• pp.32-35
• /
• 2003

Pink rot of potato (Solanum tuberosum L.) occurred at Pyeongchang in Gangwon and at Bosung in Junnam province since 1999. The disease incidence in the surveyed areas was about 5% of harvested potatoes in 2002. Affected tubers showed a dull brown appearance and the lenticels and eyes on tubers turned dark brown. The cut surface of the diseased tuber colored faint pink and the entire surface of the diseased tuber becomes deep salmon pink within 30 min. The pathogen isolated from the diseased tubers was identified as Phytophthora erythroseptica based on morphological and cultural characteristics. Mycelial mat was fairly fluffy, rosette or stellate patterns and rounded or angular hyphal swellings were farmed in water, Temperature for mycelial growth was ranged from 5 to 3$0^{\circ}C$ and optimal temperature was $25^{\circ}C$. Non-papillate sporangia were persistent on stalk and ellipsoid, ovoid, obpyriform or distorted in shape, often with a constriction distal in the middle. Size of sporangia was 41.3~69.6$\times$26.8~47.4 (av, 55.5$\times$37.1) ${\mu}{\textrm}{m}$. Sexuality of Phytophthora erythroseptica was homothallic. Oogonia were 30~46 ${\mu}{\textrm}{m}$ in diameter and oospores were 28~35 ${\mu}{\textrm}{m}$ in diameter, Elongated or cyclindrical antheridia were all amphigynous. This is the first report on potato pink rot caused by Phytophthora erythroseptica in Korea.

• Research in Plant Disease
• /
• v.18 no.2
• /
• pp.133-138
• /
• 2012

In November 2009, a powdery mildew on glossy abelia (Abelia ${\times}$ grandiflora) was found in Seogwipo, Jeju Island, Korea. Further survey in the southern part of Korea, e.g., Jeju, Busan, and Tongyeong confirmed occurrence of the disease. White colonies were present on leaves, young stems, and flowers, detracting from their beauty in landscape plantings. Severely infected lesions were discolored to red-purplish. Based on the morphological characteristics and analysis of rDNA, the fungus associated with the symptoms was identified as Erysiphe abeliicola U. Braun & S. Takam. This work provides the morphological feature of its anamorph for the first time, which is characterized by having multi-lobed hyphal appressoria and short foot-cells of conidiophores. Morphological characteristics of mature chasmothecia were consistent with the previous Japanese record of this species. The sequence of internal transcribed spacer region of ribosomal DNA obtained from a Korean sample showed that this species places in the section Microsphaera of the genus Erysiphe in phylogenetic position, corresponding with the classical taxonomy. This is the first report of E. abeliicola and its host plant in Korea. The host plant A. ${\times}$ grandiflora is newly listed in the host range of E. abeliicola.

• Archives of Plastic Surgery
• /
• v.38 no.5
• /
• pp.616-620
• /
• 2011

Purpose: Mayer-Rokitansky-Kuster syndrome (MRK) is second common cause of primary amenorrhea. It is a syndrome of vaginal aplasia and Mullerian duct anomaly. Vaginal aplasia varies from agenesis of whole vagina to aplasia of upper 2/3. For reconstructing vagina, various methods are introduced. Gracilis myocutaneous flap was the first attempt in that the flap is used in vaginal reconstruction. Various flap-based vaginal reconstruction methods have been introduced. Modified Singapore flap (pedicled neurovascular pudendal thigh fasciocutaneous flap) is one of those methods that used posterior labial artery as pedicle, and pudendal nerve branch as sensory root. As its donor lies on inguinal crease that is easily hidden and there are benefits on sexual intercourse by early sensory recovery, authors think that modified Singapore flap is effective for young MRK syndrome patients. Methods: Eight patients underwent surgery between 2008 and 2010. The flap was designed on both groin area with external pudendal artery branch as a pedicle. All flaps were fixated in pelvic cavity with absorbable suture, and additional compression on neovaginal wall was supplied by polyvinyl alcohol sponge ($Merocel^{(R)}$). Results: All patients were successfully reconstructed without flap related complications such as congestion or partial flap loss. The average size of the flap (each side) was 69.34 $cm^2$. Polyvinyl alcohol sponge ($Merocel^{(R)}$) was inserted into neovagina for 5 days on every patient. One case of rectal laceration was occurred while making pelvic pocket by OBGY team. Other complications such as lumen narrowing, wound contracture or vaginal prolapsed were not reported during 8 months of follow up. Conclusion: Modified Singapore flap is a sensate fasciocutaneous flap that is thinner than other myocutaneous flap such as VRAM, and more durable over skin graft. Therefore this is a good choice for vaginal reconstruction in MRK syndrome. And known complications of Modified Singapore flap could be reduced with careful procedure and mild compression techniques.

• Tunnel and Underground Space
• /
• v.17 no.2 s.67
• /
• pp.109-118
• /
• 2007

The excavation damaged zone (EDZ) is an area around an excavation where in situ rock mass properties, stress condition. displacement. groundwater flow conditions have been altered due to the excavation. Various studies have been carried out on EDZ, but most studies have been focused on the mechanical bahavior of EDZ by in situ experiment. Even though the EDZ could potentially form a high permeable pathway of groundwater flow, only a few studies were performed on the analysis of groundwater flow in EDZ. In this study, the' hydraulic EDZ' was defined as the rock Lone adjacent to the excavation where the hydraulic aperture has been changed due to the excavation. And hydraulic EDZ (hydraulic aperture changed zone) estimated by two-dimensional DEM program was considered in three-dimensional DFN model. From this approach the groundwater flow characteristics corresponding to hydraulic aperture change were examined. Together. a parametric study was performed to examine the boundary conditions that frequently used in DFN analysis such as constant head or constant flux condition. According to the numerical analysis, hydraulic aperture change induced by the hydraulic-mechanical interaction becomes one of the most important factors Influencing the hydraulic behavior of jointed rock masses. And also from this study, we suggest the proper boundary condition in three-dimensional DFN model.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.6
• /
• pp.531-536
• /
• 2009

Radial variations of ray spacing and frequency of biseriate ray were examined in the woods of most commercially important Korean softwood species of Pinus koraiensis and Larix kaempferi. Ray spacing, or ray number per mm in cross section, averaged 4.6 and 9.0 in Pinus koraiensis and Larix kaempferi, respectively. Thus, rays of Larix kaempferi appeared to be more closely arranged than those of Pinus koraiensis. Ray spacing was the densest around pith, and then slowly decreased toward bark. In tangential section, biseriate ray frequency of Larix kaempferi was higher than that of Pinus koraiensis. Biseriate ray was designated, based on the number of cells of biseriate portion in vertical extent, as the type of B+1 (one cell high), B+2 (two cells high), and so on. The dominated type was B+1 in Pinus koraiensis but B+2 in Larix kaempferi. The biseriate ray types of B+3, B+4, and B+5 were occasionally found in earlywood. Interestingly, even B+6 and B+7 types were observed in Larix kaempferi. In conclusion, it was considered that ray spacing could be used for separating juvenile wood from adult wood. Also, characteristics of ray spacing and biseriate ray might be used for identifying these two species.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.6
• /
• pp.566-577
• /
• 2009

The modification of wood color occurs rapidly during the service period at indoor. It is crucial to investigate the characteristics of color change, chemical and microscopical modification of wood at indoor. Wood products made of Japanese cedar at different years were used for this work. The tests were performed in order to evaluate the degree of color change of wood surface, breakpoint of brightness from surface to inside of wood, chemical analysis with FT-IR, and microscopical characteristics using the LM and TEM. Surface color of cedar wood stored indoor were rapidly changed at early stage, particularly ${\Delta}a$ (yellow), and ${\Delta}b$ (red) values were steeply decreased for one year old indoor wood, ${\Delta}L$ (white) value was dropped until 5 years old indoor wood compared with control sample. Decrease of peaks related to polysaccharide and lignin was noticed, especially, lignin was severely degraded. Although degradation of cell wall limited only to surface layers of indoor wood, degradation pattern of indoor wood showed similar degradation pattern to natural weathering of wood during outdoor weathering or wood behavior under artificial UV irradiation.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.3
• /
• pp.93-100
• /
• 2008

For investigation of adsoption properties of cadmium elimination by wood charcoal, $25m{\ell}$ aqueous cadmium solutions in various concentrations were treated with 0.2 g wood charcoal of Red Oak (Quercus mongolica) for 280 minutes. Almost 100% of cadmium elimination ratio was obtained in the solutions with initial concentration of 20 and 40 ppm in the treatment, whereas they were 75 and 50% in those of 80 and 160 ppm. In the effect of treatment time, the highest amount of cadmium ions was eliminated during the first ten minutes in each solution so that the elimination ratio of each case was over 70% of the maximum elimination value. From the analysis of adsorptive cadmium adsorption mechanism using the Langmuir adsorption isotherm, it was suggested that cadmium ion molecules were adsorbed at the active sites on the charcoal particle in form of one layer. The Gibbs free energy of the adsorption process was calculated in negative value for each solution. This means the adsorption processes are spontaneous which do not require the extra input energy.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.129-129
• /
• 2000

태양전지는 태양광에너지를 바로 전기에너지로 전환시키는 소자이다. 최근에는 다결정 태양전지의 응용가능성에 대한 연구가 활발히 진행되어 오고 있다. 이 중 CuInSe2는 여러 가지 좋은 물성을 가지고 있어서, 저가의 고효율 태양전지를 위한 광흡수층 재료로 주목받고 있다. 현재까지 다양한 방법이 시도되었지만, 10% 이상의 고효율을 가지는 고품질을 박막을 얻는 방법은 진공증발증착법과 selenization 방법뿐이다. 이 중 진공증발증착법에 의하여 형성된 박막을 이용하여 가장 높은 효율의 태양전지를 얻을 수 있으나, 진공 장비의 대면적화가 힘들기 때문에 대면적 태양전지 제조가 힘들다는 단점이 있다. 따라서 selenization 방법을 이용하여 CuInSe2 박막을 제조하는 것이 가장 유망한 방법이라 할 수 있다. Selenization 방법은 Cu-In 금속층을 제작한 뒤 이를 selenium과 반응을 시키는 방법이다. 따라서 이 방법을 이용하여 박막을 제조할 때는 Cu-In 금속층의 물성 조절이 이후 생성되는 CuInSe2 박막의 물성향상에 필수적이다. 따라서 Cu-In 금속층의 물성에 대해 많은 연구가 이루어지고 있다. 하지만 Cu-In 이 성분계에서 알려진 반가 없다. 저온에서는 반응속도론적으로 매우 느리게 반응이 일어나기 때문에 열역학적으로 안정한 상을 얻기가 힘들기 때문이다. 따라서 본 실험에 앞서 각 제조 조건에 따른 열역학적인 안정상을 계산하였다. 그 결과, 상온에서 Cu의 양이 증가함에 따라, In$\longrightarrow$CuIn2$\longrightarrow$Cu11In9$\longrightarrow$Cu7In3 상으로 변화하였다. 9$0^{\circ}C$이하의 온도에서는 CuIn2 상이 안정하였고, 10$0^{\circ}C$ 이상의 온도에서는 Cu11In9 상 두 가지로 존재하였고, Cu/In 인가전력비를 변화시켰을 때 조성비가 선형적으로 변하였다. 즉, Cu-In 동시스퍼터링법은 원하는 조성을 간편한 방법으로 정확하게 조절할 수 있는 방법이라 할 수 있다. 증착 온도를 변화시켰을 때는 9$0^{\circ}C$ 이하의 낮은 온도에서 존재하던 CuIn2 상이 10$0^{\circ}C$이상의 온도에서는 완전히 사라지고 In과 CuIn2 상이 사라지고 In 상과 Cu11In9 상이 나타났다. 상전이를 위하여 30$0^{\circ}C$의 높은 열처리 온도가 필요한 것은, 밀 저온 안정상이 형성된 뒤 각 원소들의 확산에 의해 상전이가 일어나기 때문에 이를 위한 충분한 열에너지를 가질 수 있는 온도가 필요하기 때문이다. 조성을 일정하게 유지하면서 챔버 압력을 변화시켰을 때는 형성되는 상의 미세구조난 결정성은 일정하였다. 인가전력, 증착온도, 챔버 압력 변화에 따른 상변화는 앞서 계산한 열역학적 결과와 정확히 일치하였다. 이는 동시스퍼터링 방법이 각 입자들을 원소 단위에서 균일하게 혼합할 수 잇는 방법이고, 또 입자들이 높은 에너지를 가지고 있기 때문이다. 즉, 원소 단위에서 균일한 반응을 하고, 가장 안정한 위치로 쉽게 이동할 수 있기 때문에 열역학적으로 안정한 상을 형성할 수 있는 것이다.