• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3370-3377
• /
• 2015

FMECA(Failure Mode, Effects and Criticality Analysis) techniques to make quantitative evaluation of failure effects severity and criticality have been applied to systematic failure analysis for reliability improvement of train which should provide regular service and secure high level of safety as a mass transportation system. These FMECA techniques do not fully reflect the inherent train operation and maintenance circumstances because they are based on the FMECA standards devised for other industries such as automobile industry and FMECA standard dedicated to train industry has not been established yet. This paper analyzes FMECA standards for various industries, and suggests a FMECA technique dedicated to train industry which makes failure effect analysis and criticality analysis step by step and makes criticality analysis placing emphasis on the severity of the failure effect. The proposed technique is applied to FMECA of high-speed current breaker which is a core safety device of train using field failure data for 15 years of train maintenance. The FMECA results show that breakage of arc chute has the highest risk with 3rd severity class and 5th criticality class among all the components of high-speed circuit breaker. Damage and poor contact of electronic valve, and cylinder breakage with 3rd severity class and 4th criticality class are followed by. These results can be applied to improvement of design and maintenance process for high-speed circuit breaker of train.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.5
• /
• pp.75-82
• /
• 2015

An experimental study has been carried out to examine development length effects for high strength headed deformed bars. Current design codes limit the specified yield strength of headed bars to 400 MPa. Such the limit is due to the lack of experimental studies on headed bars made of high strength materials. Thus a test program was planed with headed bars with the yield strength of 600 MPa. The threaded head type with head shapes of round plate and circular cone was selected in this study. The experimental variables were development length, number of bars, and head shape. Specimens were classified into L-type and S-type depending on the development length. The development length of L-type was computed according to the design code without considering the limit. S-type specimens had shorter development lengths than the L-type. Further classification was made depending on the shape of heads. A-types have the head shape of round plate and B-types have the shape of circular cone. Three L-type specimens were fabricated with the variable of number of bars (1, 2, and 3). Four specimens for each of SA and SB types were made with development lengths of 50%, 45%, 40%, and 35% compared with L-type. Pullout tests was carried out with 11 specimens. The test results were compared with computed strengths with the design code equations (Appendix II). Based the current studies, it can be said that high strength headed deformed bars used in this study be able to provide such strengths computed with the current design code without considering the yield strength limit.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.34 no.2
• /
• pp.63-74
• /
• 2016

The purpose of this study is to expand a prospect of a few-remaining Byeolseo scenic sites of Gangwon-do(Province) through determining placeness formation, prospect characteristics, and landscape meanings of Gumi(Nine beauties) and Sipalgyung(18 scenic views) in Gumijeongsa. Gumijeongsa, which is located in a riverside of the Goljicheon(stream), a part of upstream of Namhangang, is the oldest existing Nujung architecture in the Jeongseon area. This study tried to unearth the Gumijonegsa's locational and formational characteristics through literature review and a field survey. Especially, through the field survey, this study tried to figure out the landscape meanings and contents of Gumi and Sipalgyung by Gumijeongsa's position and its prospect compositions. As a result of this study, Gumi and Sipalgyung of Gumijeongsa are variations of typical traditional culture of Gugok(Nine river bends) and Palgyung(Eight scenic views). Ja Lee, the founder, administrated Gumijeongsa as a core residence of Gugok culture. He established beautiful nine viewpoints from the building, named Gumi, and added 18 detailed landscapes(two landscapes for one beauties), instead of establishing nine river bends of the stream. The Gumi and Sipalgyung are formed by reflection of beautiful locational characteristics from the views in Gumijeongsa, thus the Gumi is the concept which is a unique variation of Gugok and Palgyung culture.

• Journal of KIISE:Databases
• /
• v.31 no.3
• /
• pp.261-273
• /
• 2004

Advances in information and communication technologies have been creating new classes of applications in the area of databases. For example, in moving object databases, which track positions of a lot of objects, or stream databases, which process data streams from a lot of sensors, data Processed in such database systems are usually changed very rapidly and continuously. However, traditional database systems have a problem in processing these rapidly and continuously changing data because they suppose that a data item stored in the database remains constant until It is explicitly modified. The problem becomes more serious in the R-tree, which is a typical index structure for multidimensional data, because modifying data in the R-tree can generate cascading node splits or merges. To process frequent updates more efficiently, we propose a novel update technique for the R-tree, which we call the leaf-update technique. If a new value of a data item lies within the leaf MBR that the data item belongs, the leaf-update technique changes the leaf node only, not whole of the tree. Using this leaf-update manner and the leaf-access hash table for direct access to leaf nodes, the proposed technique can reduce update cost greatly. In addition, the leaf-update technique can be adopted in diverse variants of the R-tree and various applications that use the R-tree since it is based on the R-tree and it guarantees the correctness of the R-tree. In this paper, we prove the effectiveness of the leaf-update techniques theoretically and present experimental results that show that our technique outperforms traditional one.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.1118-1125
• /
• 2014

The past IMF foreign exchange crisis and subprime financial crisis had a big influence on variability of macroeconomics, even if the origin of its occurrence might be different. This not only had a significant infrequence on the overall industries, but also produced many insolvent companies by being closely linked with a management environment of an individual construction company leading the construction industry. The purpose of this research is to investigate characteristics of management condition of construction company according to the size of construction company using KMV model developed on the basis of the Black & Scholes option pricing theory. This research has set 28 construction companies listed to KOSPI/KOSDAQ for applying the KMV model and measuring the level of the default risk of construction companies. The data was retrieved from TS2000 established by Korea Listed Companies Association (KLCA), Statistics Korea. The analysis period is between first quarter of 2004 and fourth quarter of 2010. This research examine characteristics of the level and fluctuation process of the management condition of construction company according to the size of construction company.

• The KIPS Transactions:PartC
• /
• v.15C no.1
• /
• pp.37-44
• /
• 2008

In order to minimize the signaling delay for a resource reservation on the new routing path after the handover of Mobile Node(MN) is completed, it is important to discover the crossover node where the old and new routing paths meet. With the 크로스오버 노드 being found, the signaling messages only need to be transferred on the changed part of the end-to-end path. The crossover node is generally discovered using the end-to-end Session ID(SID) of the established session between MN and Correspondent Node(CN). However, in the Hierarchical Mobile IPv6(HMIPv6) network, if the Mobile Anchor Point (MAP) reserves the resource by aggregate with the Home Agent(HA), the crossover node discovery cannot be performed in the general way since the aggregate SID that has established between the previous MAP and HA is different from the that of the current MAP and HA after MN's handover. In this paper, we propose a mechanism to discover the crossover node within the tunnel between the MAP and the HA in an HMIPv6 network, assuming that the Next Steps in Signaling(NSIS) is deployed for the resource reservation and the aggregate reservation is applied over the MAP and HA tunnel. The local repair required for the change of path is performed upon the crossover node discovery. The simulation results show that the proposed scheme reduces the signaling delay for the reservation and outperforms the existing scheme with respect to throughput during the handover.

• The KIPS Transactions:PartD
• /
• v.16D no.5
• /
• pp.661-672
• /
• 2009

Recently it was found that various genetic structural variations such as CNV(copy number variation) exist in the human genome, and these variations are closely related with disease susceptibility, reaction to treatment, and genetic characteristics. In this paper we propose a new CNV detection algorithm using millions of short DNA sequences generated by giga-sequencing technology. Our method maps the DNA sequences onto the reference sequence, and obtains the occurrence frequency of each read in the reference sequence. And then it detects the statistically significant regions which are longer than 1Kbp as the candidate CNV regions by analyzing the distribution of the occurrence frequency. To select a proper read alignment method, several methods are employed in our algorithm, and the performances are compared. To verify the superiority of our approach, we performed extensive experiments. The result of simulation experiments (using a reference sequence, build 35 of NCBI) revealed that our approach successfully finds all the CNV regions that have various shapes and arbitrary length (small, intermediate, or large size).

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.11
• /
• pp.527-534
• /
• 2016

The emergent information society requires the talent for creative thinking based on problem-solving skills and comprehensive thinking rather than simple memorization. Therefore, the Korean curriculum has also changed into the direction of the creative thinking through increasing short-answer questions that can determine the overall thinking of the students. However, their scoring results are a little bit inconsistency because scoring short-answer questions depends on the subjective scoring of human raters. In order to alleviate this point, an automated scoring system using a machine learning has been used as a scoring tool in overseas. Linguistically, Korean and English is totally different in the structure of the sentences. Thus, the automated scoring system used in English cannot be applied to Korean. In this paper, we introduce an automated scoring system for Korean short-answer questions using predictability and unanimity. We also verify the practicality of the automatic scoring system through the correlation coefficient between the results of the automated scoring system and those of human raters. In the experiment of this paper, the proposed system is evaluated for constructed-response items of Korean language, social studies, and science in the National Assessment of Educational Achievement. The analysis was used Pearson correlation coefficients and Kappa coefficient. Results of the experiment had showed a strong positive correlation with all the correlation coefficients at 0.7 or higher. Thus, the scoring results of the proposed scoring system are similar to those of human raters. Therefore, the automated scoring system should be found to be useful as a scoring tool.

• The KIPS Transactions:PartD
• /
• v.13D no.5 s.108
• /
• pp.641-650
• /
• 2006

XML has the characteristics of self-describing and uses DTD or XML schema in order to constraint its structure. Even though the XML schema is only at the stage of recommendation yet, it will be prevalently used because DTD is not itself XML and has the limitation on the expression power. The structure defined by the XML schema as well as the data of the XML documents can vary due to complex reasons. Those reasons are errors in the XML schema design, new requirements due to new applications, etc. Thus, we propose XML schema evolution operators that are extracted from the analysis of the XML schema updates. These schema evolution operators enable the XML schema updates that would have been impossible without supporting tools if there are a large number of XML documents complying the U schema. In addition, these operators includes the function of automatically finding the update place in the XML documents which are registered to the XSE system, and maintaining the XML documents valid to the XML schema rather than merely well-formed. This paper is the first attempt to update XML schemas of the XML documents and provides the comprehensive set of schema updating operations. Our work is necessary for the XML application development and maintenance in that it helps to update the structure of the XML documents as well as the data in the easy and precise manner.

• The KIPS Transactions:PartA
• /
• v.8A no.4
• /
• pp.319-330
• /
• 2001

In virtual memory system, when a process attempts to access a page that is not resident in memory, the system generates and handles a page fault that causes unpredictable delay. So virtual memory system is not appropriate for the real-time system, because it can increase the deadline miss ratio of real-time task. In multimedia system, virtual memory system may degrade the QoS(quality of service) of multimedia application. Furthermore, in general-purpose operating system, whenever a new task is dynamically loaded, virtual memory system suffers from extensive page fault that cause transient overloading state. In this paper, we present efficient overloading control mechanism called RBPFH (Rate-Based Page Fault Handling). A significant feature of the RBPFH algorithm is page fault dispersion that keeps page fault ratio from exceeding available bound by monitoring current system resources. Furthermore, whenever the amount of available system resource is changed, the RBPFH algorithm dynamically adjusts the page fault handling rate. The RBPFH algorithm is implemented in the Linux operating system and its performance measured. The results demonstrate RBPFH\`s superior performance in supporting multimedia applications. Experiment result shows that RBPFH could achieve 10%∼20% reduction in deadline miss ratio and 50%∼60% reduction in average delay.