• Journal of Biomedical Engineering Research
• /
• v.25 no.6
• /
• pp.581-587
• /
• 2004

Conventional power spectrum methods based on FFT, AR method are not appropriate for analyzing biomedical signals whose spectral characteristics change rapidly. On the other hand, time-frequency analysis has more desirable characteristics of a time-varying spectrum. In this study, we investigated the spectral components of heart rate variability(HRV) in time-frequency domain using time frequency analysis methods. In the various time-frequency kernels functions, we studied the suitable kernels for the analysis of HRV using synthetic HRV signals. First, we evaluated the time/frequency resolution and cross term reduction of various kernel functions. Then, from the instantaneous frequency, obtained from time-frequency distribution, the method extracting frequency components of HRV was proposed. Subjects were 17 healthy young men. A coin-stacking task was used to induce mental stress. For each subjects, the experiment time was 3 minutes. Electrocardiogram, measured during the experiment, was analyzed after converted to HRV signal. In the results, emotional stress of subjects produced an increase in sympathetic activity. Sympathetic activation was responsible for the significant increase in the LF/HF ratio. Subjects were divided into two groups with task ability. Subjects who have higher mental stress have lack of task ability.

• Journal of Biomedical Engineering Research
• /
• v.18 no.3
• /
• pp.273-283
• /
• 1997

Electrogastrography(EGG), the cutaneous recording of the myoelectrical activity of the stomach using surface electrodes, is attactive due to its non-invasiveness. Despite many attempts made over the decades, analysis of surface EGG has not led to identification of contraction-related electrical response activity of the stomach that would help the clinician to diagnose motility disorders of the stomach. We propose feasible methods to detect the gastric contraction by spectrum analysis and vector analysis of the surface EGG signal. A running spectral analysis(RSA) based on the fast Fourier transform (FFT) was applied to the filtered EGG signal. The powers of dominant frequency and its harmonics were compared with gastric contraction signals such as the strain gauge signal from the gastric serosa in dog or the antropyloric pressure in human. And we also carried out vector analysis of the filtered EGG signals obtained from three paired electrodes. The amplitude and direction of the calculated EGG vector were analyzed and compared with the gastric contraction signals. From the spectrum analysis, we found that the increase of the power of the first harmonic of the dominant frequency was highly correlated with the gastric contraction. And from the vector analysis of the EGG signal, we found a typical change of the amplitude and direction of the EGG vector, which can indicate occurrences of the gastric contraction.

• Journal of Life Science
• /
• v.16 no.1
• /
• pp.12-16
• /
• 2006

Genetic alternation of Brca1 predispose of breast and ovarian cancer. Brca1 plays critical role in cell cycle regulation following DNA damage. Previous studies revealed that Brca1 plays an important role in S phase and G2/M checkpoint regulation. However, whether Brca1 involves in spindle checkpoint is unclear. In this study, the role of Brca1 in cell cycle response following nocodazole, which is a reagent that depolymerizes microtubules and activates the spindle checkpoint, has been examined using wild type $p53^{-/-}\;and\;p53^{-/-}Brca1^{-/-}$ mouse embryonic fibroblasts (MEFs). While wild type and Brca1-proficient MEFs showed an acute mitotic arrest, Brca1-deficient MEFs failed to arrest at mitotic phase in response to nocodazole treatment. In double-thymidine block and nocodazole treatment experiment, a portion of $p53^{-/-}\;Brca1^{-/-}$ MEFs were clearly by-passed nocodazole induced mitotic arrest. Consistent with this, in morphologic analysis, $p53^{-/-}\;Brca1^{-/-}$ MEFs showed growing cell morphology after nocodazole treatment. Taken together, these results suggest that Brca1 protein is an important component for normal induction of spindlecheckpoint and impairment of Brca1 function could induce dysregulation of mitotic cell cycle that ultimately results in genomic instability.

• Korean Journal of Food Science and Technology
• /
• v.29 no.6
• /
• pp.1228-1235
• /
• 1997

This study was conducted to standardize the proper ingredient ratios of chinese cabbage kimchi by the sensory evaluation, chemical properties, and functional properties of antimutagenic effect and inhibitory effect on the growth of cancer cells from the ratios obtained from literatures. The standardized ratios of ingredient from the literatures was 13.0 of radish, 2.0 of green onion, 3.5 of red pepper powder, 1.4 of garlic, 0.6 of ginger, 2.2 of anchovy juice, 1.0 of sugar and the final salt concentration 2.7 in the proportion of 100 salted chinese cabbage. The standardized ratio of the ingredients exhibited better overall acceptability and less moldy smell and moldy flavor than any other ratio of ingredient in the sensory evaluation. The standardized kimchi with the above ratios of the ingredients, at final salt concentration of 2.5%, showed high reducing sugar contents and Leuconostoc sp. counts. All juices of the chinese cabbage kimchi showed not only high antimutagenicity against aflatoxin $B_1$ in Salmonella typhimurium TA100 but also strong inhibitory effect on the growth of AGS human gastric adenocarcinoma cells in SRB assay, especially these functional properties were the most effective at each standardized ratio of the ingredients. From the taste, chemical and functional properties, the standardized ratios of ingredients was 13.0 radish, 2.0 green onion, 3.5 red pepper powder, 1.4 garlic, 0.6 ginger. 2.2 anchovy juice, 1.0 sugar and the final salt concentration 2.5 in the proportion of 100 salted chinese cabbage.

• Korean Journal of Food Science and Technology
• /
• v.29 no.6
• /
• pp.1175-1183
• /
• 1997

Lethal effects of high voltage pulsed electric fields (PEF) on suspensions of Lactobacillus plantarum cells in phosphate buffer solution were examined by using continuous recycle treatment system. Critical electric field strength and treatment time needed for inactivation of L. plantarum were 13.6 kV/cm and $16.1\;{\mu}s$ at room temperature, respectively. As decrease in frequency (decreasing pulse number), the degree of inactivation of L. plantarum was increased. A 2.5 log reduction in microbial population could be achieved with an electric field strength of 80 kV/cm, 300 Hz frequency and $2000\;{\mu}s$ treatment time. Survivability was decreased with increase in total treatment time (cycle number) and frequency at the same cycle number. As sterilization model of continuous recycle PEF treatment, $logS=-N_m\;log\;m+B$ and $N_m=k_1\;P_n+k_2$ were established. This model was very well fitted to tile empirical data. The rate of inactivation increased with increase in the processing temperature. The maximum reduction in survivability (5.6 log reduction) was obtained with 80 kV/cm electric field strength at $50^{\circ}C$ for $1000\;{\mu}s$ treatment.

• Journal of the Korea Concrete Institute
• /
• v.20 no.2
• /
• pp.147-156
• /
• 2008

In an uniaxial compressive test of a concrete standard specimen (150$\times$300 mm) the crack initiation and extension with the stress increase are the major reason of the failure, which is similar to the breakage of the particle bonding in the simulation by using particle bonded model, especially particle flow code in 3 dimensions (PFC3D) developed by Itasca Consulting Group Inc. That is the main motive to study the possibility of an uniaxial compressive strength test simulation. It is important to investigate the relationship between the micro-parameters and the macro-properties because the 3-dimensional particle bonded model uses the spherical particles to analyze the physical phenomena. Contact bonded model used herein has eight micro-parameters and there are five macro-properties; Young's modulus, Poisson's ratio, uniaxial compressive strength and the crack initiation stress and the ratio concerning the crack propagation with the stress. To simulate the compressive test we made quantitative relationships between the micro-parameters and the macro-properties by using the fractional factorial design and various sensitivity analyses including regression analysis, which result in the good agreement with the previous studies. Also, the stress-stain curve and the crack distribution over the specimen given by PFC3D showed the mechanical behavior of the concrete standard specimen under the uniaxial compression. It is concluded that the particle bonded model can be a good tool for the analyzing the mechanical behavior of concrete under the uniaxial compressive load.

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.3
• /
• pp.285-288
• /
• 2020

The demand for coating technology on electric power equipment that has arisen from such issues regarding the attaching of illegal advertisements and posters to electric power distribution boxes such as TR, SW, etc. in down town areas seeks to produce functional coating surfaces using polymers and nano-materials that will result in improvements in self-cleaning performance and greater stability even under harsh environmental conditions. KEPCO-coatings consist of copolymerized acrylic resin and methacryl-modified reactive silicone that are able to chemically combine, which results in performance improvement without any leakage of of silicone, thus contributing to its properties of high-stability. Thus, the research team has also started long-term on-site testing on 9 electric power distribution spots around a city center in cooperation with the KEPCO Daeduck-yusung branch. The KEPCO-coating technology could advance the best coating materials and processes to meet appropriate circumstances for a variety of outdoor damage environment. It is also predicted that KEPCO could be possible to expand international electric maintenance markets and to arrange business platforms if KEPCO would achieve its original technology (IPs) by the means of upgrading in self-cleaning coating technology and obtaining long-term on-site test records from nationwide electric facilities.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.1
• /
• pp.20-28
• /
• 2006

Statement of problem: The titanium has advantages of a high biocompatibility, a corrosion resistence, low density, and cheep price, so it is focused as a substituted alloy But it is quite difficult to cast with the tranditional method due to the high melting point, reacivity with element at, elevated temperature. By using the CAD-CAM system for the crown construction, it is possible to reduce the errors while proceeding the wax-up, investing, and casting procedure Purpose: The purposes of this study were to measure the marginal adaptation of the casting titanium coping and machine-milled titanium coping according to the casting methods and the marginal configurations. Material and method: The marginal configurations were used chamfer shoulder, and beveled shoulder. The total 30 copings were used, and these are divided into 6 groups according to the manufacturing method and marginal configuration. The gap between margin of the model and the restoration was measured with 3-dimensional measuring microscope. Results: The following results were obtained; 1. casting gold coping demonstrated the best marginal seal, followed by casting titanium coping finally machine-milled titanium copings. 2. In casting titanium coping, chamfer demonstrated the best marginal seal, followed by shoulder and beveled shoulder. There was no significantly difference in shoulder and beveled shoulder. But all margin form has clinically acceptable 3. In machine-milled titanium copings, chamfer demonstrated the best marginal seal, followed by shoulder and beveled shoulder. Beveled shoulder show large and uneven marginal gap Conclusions: Above result revealed that marginal adaptation of the titanim coping is avail able in the clinical range, it can be used as an alternative metal and it is prefered especially in chamfer or shoulder margin during implant superstructure fabrication. But there should be more research on machine-milled titanium in order to use it in the clinics.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.2
• /
• pp.41-45
• /
• 2012

Oxynitride green phosphors for white light emitting diodes (LEDs) were synthesized and their optical properties were evaluated. The N/O ratio ($\delta$) of $SrSi_2O_{2-{\delta}}N_{2+2/3{\delta}}:Eu^{2+}$ closely depended on the synthesizing conditions. The most excellent green emission (545 nm), which was assigned to the $5d{\rightarrow}4f$ transition of $Eu^{2+}$ ions, was achieved at the conditions of $1700^{\circ}C$, 5 mol% $Eu^{2+}$, and $H_2$ atmosphere. The well-developed $Ca-{\alpha}-SiAlON:Yb^{2+}$ particles with homogeneous size were obtained at m = 3 (n = 0.15) for the compound of $Ca_{0.5m-0.005}Yb_{0.005}Si_{12-(m+n)}Al_{m+n}O_nN_{16-n}$, resulting in the strong green emission at around 550 nm.

• Korean Institute of Interior Design Journal
• /
• v.21 no.3
• /
• pp.182-193
• /
• 2012

The percentage of senior citizens is increasing in Korea and it is expected to become an "aging society". Problems with the elderly are becoming a big concern, such as physical and mental illness, losing their jobs and having difficulties at home. But, the silver generation, as they are being known, has changed a lot these days. With the aid of medical developments, the elderly's lifespan has become longer, making them more independent and active. Senior Welfare Center's are places where the elderly can spend their golden years in comfort, meaningfully. Senior Welfare Center's these days provide many different programs, which naturally lead to an increase in elderly users. With the rise in welfare centers and users, research on the subject also grew. As this topic has only recently become an issue, there were not many spatial structure studies considering elderly movement. Therefore, there should be spatial structure research that considers older users space awareness and how it can be managed effectively. The goal of this study is to present basic resources for providing a comfortable senior welfare center for elders. This will be based on quantitative analysis derived from spatial structure research along with special construction characteristics based on the institution's general plan. As a research method, Senior Welfare Center's will be categorized into corridor type, hall type, and hybrid types which then be reproduced into a j-graph. Based on this, special structure characteristics and connection links will be comprehended. Then the connection link will be analyzed based on the space syntax result calculated from each type's integration, connectivity, control value, and intelligibility. The analysis result shows that Senior Welfare Center j-graph's average arrangement is hybrid>corridor>hall types. Those elders lacking awareness need easily perceivable spatial structure's and hall type's would be the best choice to increase their awareness as it has high articulation. However, hall type's would be difficult to construct with the size increase, so hybrid type would be the next logical solution. Space with relatively high articulation will need to be planned in hybrid type's where rest areas can be created within the halls in the Welfare Center in connection to its corridors.