• The Journal of the Korea Contents Association
• /
• v.15 no.6
• /
• pp.539-546
• /
• 2015

In this study, we develop numerical model using the elliptic mild-slope equation for waves propagating around axis-symmetric topographies where the water depth varies arbitrarily having zero at the coastline. The entire region is divided into three regions. In the both of inner and outer regions, an existing analytical solutions are used. In the middle region, the finite element technique is applied to the governing equation. To get the solution, the methods of separation of variables, Frobenius series are used. Developed solution is validated by comparing with previously developed analytical solution. We also investigate various cases with different bottom topographies.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.4
• /
• pp.233-240
• /
• 2019

Open-hole tensile tests are usually performed to measure the tensile strengths of composites as they are an essential parameter for designing composite structures. However, correctly modeling the tensile test is extremely challenging as it involves various damages such as fiber and matrix damage, delamination, and debonding damage between the fiber and matrix. Therefore, a progressive damage model was developed in this study to estimate the in-plane failure and delamination between the fiber and matrix. The Hashin damage model and cohesive zone approach were used to model ply and delamination failures. The results of the present model were compared with previously published experimental and numerical findings. It was observed that neglecting delamination during finite element analysis led to overestimation of tensile strength.

• Applied Chemistry for Engineering
• /
• v.33 no.5
• /
• pp.488-495
• /
• 2022

Activated carbon (AC) and carbon molecular sieve (CMS) have attracted attention as porous materials for recovery and separation of greenhouse gases. The carbon molecular sieve having uniform pores is used for collecting and separating gases because it may selectively adsorb a specific gas. The size and uniformity of pores determine the performance of the CMS, and chemical vapor deposition (CVD) is widely used to coat the surface with a predetermined thickness in order to control the CMS's micropores. This CVD method can be used to control the size of pores in CMS manufacturing, but it must be optimized because of its various experimental variables. Therefore, in order to produce AC and CMS for gas adsorption and separation, this review focuses on various activation processes and pore control technologies by CVD and surface treatment.

• Journal of Korea Water Resources Association
• /
• v.32 no.3
• /
• pp.247-254
• /
• 1999

The frequency analyses of annual maximum rainfall data for 22 rainfall gauging stations is Korea were performed. The method of moments (MOM), maximum likelihood (ML), and probability weighted moments (PWM) were used in parameter estimation. The GEV distribution was selected as an appropriate model for annual maximum rainfall data based on parameter validity condition, graphical analysis, separation effect, and goodness of fit tests. For the selected GEV model, spatial analysis was performed and rainfall intensity-duration-frequency equation was derived by using linearization technique. The derived rainfall intensity-duration-frequency equation can be used for estimating rainfall quantiles of the selected stations with convenience and reliability in practice.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.5-5
• /
• 2011

나노섬유를 제조하는 방법 중에는 상분리 현상을 이용한 방법, 자가 조립성을 이용한 방법, 템플레이트를 이용한 방법, 전기방사법이 있으며 특히 전기방사법은 연속적으로 균일한 나노섬유를 제조할 수 있다. 또한 전기방사법은 장비가 간단하며 고분자 blend ratio와 무기재료의 함량에 따라 뛰어난 특성을 나타내는 나노복합섬유를 만들 수 있다. 최근 식물에서 추출한 단백질을 전기방사법을 이용하여 나노입자 및 나노섬유를 제조하고 이를 의료 분야 등에 적용하기 위한 연구가 활발히 진행되고 있으며 이런 식물성 단백질은 동물성 단백질에 비하여 인체 적용이 용이하고 매장량이 풍부한 장점이 있다. 본 연구에서는 전기방사법을 이용하여 옥수수에서 추출한 단백질인 zein의 나노입자 및 나노섬유를 제조하였다. 또한 천연 추출물이 혼입된 복합 나노입자 및 나노섬유를 제조하여 zein이 가진 고유 특성 이외에 천연 추출물의 특성을 추가로 부여해서 더욱 발전된 나노입자 및 나노섬유를 제조하였다. 고분자 농도, 전압, 방사거리 등 다양한 공정변수를 조절하여 최적의 조건을 확립하였으며 제조된 나노입자 및 나노섬유는 field-emission type scanning electron microscope (FE-SEM), transmission electron microscopy (TEM), ultraviolet-visible spectroscopy (UV/vis), fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC)를 이용하여 특성분석을 실시하였다.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.1 no.2
• /
• pp.1-13
• /
• 2010

Delamination reduces an elastic buckling load of the laminated composite structures and lead to global structural failure at loads below the design level. Therefore, the problem of the delamination buckling of laminated composite structures has generated significant research interest and has been the subject of many theoretical and experimental investigations. However, questions still remain regarding a complete understanding and details of the phenomena involved. In this paper an efficient finite element model is presented for analyzing the elastic buckling behavior of laminated composite plates with square embedded delamination using a solid element based on a three-dimensional theory. The solid finite element, named by EAS-SOLID8, based on an enhanced assumed strain method is developed. The study for elastic buckling behavior of laminated composite plates with embedded square delaminations are focused on various parameters, such as support condition and width-to-thickness ratio. Both graphs and buckling modes in this paper are good guide for design of the laminated composite plates with embedded square delamination.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.3
• /
• pp.11-19
• /
• 2008

Background subtraction, which separates moving objects in video sequences, is an essential technology for object recognition and tracking. However, background subtraction methods are often confused by shadow regions and this misclassification of shadow regions disturbs further processes to perceive the shapes or exact positions of moving objects. This paper proposes a method for shadow elimination which is based on shadow modeling by color information and Bayesian classification framework. Also, because of dynamic update of modeling parametres, the proposed method is able to correspond adaptively to illumination changes. Experimental results proved that the proposed method can eliminate shadow regions effectively even for circumstances with varying lighting condition.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.385.2-385.2
• /
• 2014

그래핀은 전기적, 광학적, 역학적, 열적 특성 등이 아주 좋은 소재이다. Thermal Chemical Vapor Deposition (T-CVD) 장비를 이용 저 진공, 고온에서 CH4과 H2를 가스를 사용하여 그래핀을 합성을 하였다. 그래핀은 탄소만으로 이루어진 2차원 층상구조를 가지고 있다. 촉매 금속 위에서 합성이 이루어지기에 합성된 그래핀을 바로 다른 응용하기에는 어려움이 따른다. 따라서 촉매 금속에서 그래핀을 분리하여 원하는 곳으로 옮기는 과정이 필요한데, 이를 전사공정이라 한다. 최근 전기분해를 이용하여 발생되는 수소 버블을 사용하여 그래핀을 촉매로 사용되는 금속으로부터 분리해내는 Electrochemical Delamination(ED) 전사방식이 소개가 되었다. 이러한 전사 방식의 장점은 촉매기판을 제거하지 않음으로써, 다시 재활용이 가능하고, 공정에 필요한 시간이 짧다. 또한 표면에서 직접적으로 분리하는 방식이기에 촉매 금속의 양면을 사용이 가능하다. 이러한 ED방식의 장점이 있기에 공정의 최적 조건을 잡기 위하여 변수들을 바꾸어가면서 실험을 하였다. 전사된 그래핀은 표면을 광학현미경으로 확인하였고, 라만 분광기를 사용하여 라만 스펙트럼과 기본적인 전기특성을 확인하여 특성을 평가하면서, 기존의 전사방식을 사용한 그래핀 샘플과 비교분석 하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10B
• /
• pp.1885-1894
• /
• 1999

The higher mode cutoff frequencies in Crawford TEM cells computed by the Galerkin method(GM) describe in this paper. The authors also report the half mode boundaries to solve not only the cut-off frequencies of symmetric TEM cells and those of asymmetric TEM cells. It is shown that the measured resonant frequencies of the present symmetric TEM cells and a designed asymmetric TEM cell are agreed with the calculated results.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.4
• /
• pp.518-527
• /
• 1985

대류-대류의 복합 열전달 문제를 유한차분법을 사용하여 수치적으로 연구하였다. 아래로부터 가열되는 직사각형 공동 내에서의 자연 대류와 공동 위쪽의 외부 난류 경계층 유동이 복합된 경우의 열전당 현상을 고려하였다. 두개의 서로 다른 모우드의 대류가 온도 분포가 미리 알려져 있지 않은 얇은 수평평판에 의해 분리되어져 있다는 점이 본 논문의 특이점이다. 수치적 해석은 Reynolds 수와 Grashof 수 및 공동의 기하학적 종횡비의 매개 변수적 효과가 발견되도록 행하여 졌다. 외부 난류 경계층 유동의 강도에 따라 공동 내에서의 유동 형태가 변할 수 있음을 알았다. 즉 내부 부력 세포의 회전 방향은 외부 유동의 존재에 의해 특성적으로 정해지며 공동 내의 유동 세포의 수는 Grashof 수가 증가 할수록 많아진다.