• The Journal of the Petrological Society of Korea
• /
• v.20 no.2
• /
• pp.99-114
• /
• 2011

Precambrian gneiss complex in the Pyeongchang-Wonju area, which lies west of the Paleozoic sedimentary basin of the Yeongwol-Taebaek area, is being considered as a part of the Gyeonggi massif, but its ages of formation and metamorphic events are not well defined yet. In this study, SHRIMP zircon U-Pb ages were determined from the gneiss complex in the area, We obtained the discrete ages of magmatic (ca. 1960 Ma) and metamorphic (ca. 1860 Ma) events through the interpretation of the SHRIMP data based on the internal structures of zircons. These are almost the same to the ages of main intrusion and metamorphism reported from the Precambrian basements of Gyeonggi, Yeongnam and Nangnim massifs of the Korean Peninsula, Ages of 3200~3300 Ma, 2900 Ma, 2660 Ma, 2430 Ma, 2260 Ma, and 2080~2070 Ma obtained from inherited cores of studied zircons are also very similar to the frequently reported ages from the basement rocks of the Gyeonggi and Yeongnam massifs, Lower intercept age of about 270 Ma calculated from the rim data seems to indicate that the study area suffered from a late Paleozoic metamorphism (Okcheon Orogeny), but we need more reasonable and sufficient data to confirm it. According to the results of this study, it is suggested that the Bangnim group unconformably overlying the gneiss complex was deposited after the Paleoproterozoic granitic magmatism (ca. 1960 Ma) and metamorphism (ca. 1860 Ma).

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.4
• /
• pp.634-646
• /
• 2016

In this work, modified epoxy resins which were well melted in mild solvent were synthesized and solubility assessment was carried out for synthesized epoxy resins. Bisphenol-A type, phenol novolac type and ortho-cresol novolac type epoxy resins were used and fatty acid, dodecyl phenol (DP) and toluene diisocyanate (TDI) were added for synthesis of modified epoxy resins containing fatty acid (MEFA). Composition was epoxy resin/fatty acid = 1.0/0.5 and fatty acid/DP = 0.25/0.25 by equivalent weight and twelve MEFAs were synthesized according to epoxy resins. Viscosity and solubility were measured for twelve MEFAs. As a result, solubility of MEFA was excellent for mild solvent according to increasement of contents of benzene ring, glycidyl group and carbon number of alkyl group. And physical properties were measured for each coating of paints after preparing transparent paints of MEFA to melt well in mild solvent among twelve MEFAs. As a result, they showed an optimal performance on conditions of equivalent ratio of bisphenol-A type epoxy resin/fatty acid/DP/TDI; 1.0/0.25/0.25/0.5 and equivalent ratio of phenol novolac type epoxy resin/fatty acid/DP; 1.0/0.25/0.25 for drying time, adhesion, hardness, impact resistance and alkali resistance.

• Economic and Environmental Geology
• /
• v.52 no.5
• /
• pp.367-379
• /
• 2019

Pyeongan Supergroup (PS) in the Taebaeksan basin preserves key geological evidences to understand the tectonometamorphic evolution of the Songrim orogeny that affected the formation of the Korean Peninsula during the late Paleozoic to early Mesozoic. The aims of this paper therefore are to investigate the characteristics of the Songrim orogeny based on the previous results of metamorphism and deformations of the PS, and then to review geological significance and research necessity of the PS. Age distributions and Th/U ratio of detrital zircon in the PS indicate that sedimentary environment of the Taebaeksan basin during the late Paleozoic was arc-related foreland basin and retro-arc foreland basin at the active continental margin. In addition, the main magmatic activities occurred in the early Pennsylvanian and Middle Permian, thus sedimentation and magmatic activities occurred simultaneously. The PS was affected by lower temperature-medium pressure (M1) and medium temperature and pressure (M2) regional metamorphism during the Songrim orogeny. During M1, slate and phyllite containing chloritoid, andalusite, kyanite porphyroblasts intensively deformed by E-W bulk crustal shortening combined with folding and shearing. And garnet and staurolite porphyroblasts were formed during the N-S bulk crustal shortening accompained by M2. Such regional metamorphism of the PS is interpreted to occur in an area where high strain zone is localized during ca. 220-270 Ma. In order to elucidate the evolution of the Taebaeksan basin and tectonic features of the Songrim orogeny, it is expected that the study will be carried out such as the regional distribution of metamorphic zones developed in the PS, characteristics and timing of deformations, and late Paleozoic paleo-geography of the Taebaeksan basin.

• Proceedings of the KIEE Conference
• /
• 2008.11a
• /
• pp.253-255
• /
• 2008

병합장치(merging unit: MU)는 변류기(CT)와 변성기(VT)로부터 계측된 전류와 전압을 이더넷을 통해 샘플값(sampled value: SV) 메시지를 전송하는 IED이다. 본 논문에서는 병합장치(MU)의 통신 성능 테스트하기 위한 시스템을 구축하는 방법을 제시하였다. RTDS를 이용하여 계통을 모의하고 샘플값 메시지를 지원하는 과전류계전(OCR) IED를 구축 한 후 계통에 모의 고장을 통해 CB를 동작시킴으로서 성능을 확인하였다. 또한 상용 IED를 연결하여 CB 동작 테스트를 통해 구축한 통신 테스트 시스템의 상호운용성을 확인하였다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.342_343
• /
• 2009

This paper describes a compact Iron-cored Electronic Current Transformer(ECT) based on IEC 61850 9-2. The ECT developed in this study has the feature of designing the current transformer with compact iron-core, compensating error due to the nonlinear characteristic of iron-core, and applying IEC 61850 9-2 for sampled value(SMV). We test the performance of the product developed in the study in KERI, KEPRI.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.208-209
• /
• 2006

Voltage Transformer is used to transform high voltage into low voltage to input signal of protection relay. Most of the Voltage Transformers use the iron core which maximizes the flux linkage. The ratio of the Voltage Transformer depends on the transformer turns ratio. The current which flows in the Voltage Transformer has non-linear characteristic caused by hysteresis of the iron core, it causes a voltage loss in the winding impedances which makes measurement errors. This paper describes an error compensation method considering hysteresis characteristic. The proposed compensation method improves error by calculating the primary current from the exciting current of the hysteresis loop in the Voltage Transformer, compensating the voltage loss.

• Speech Sciences
• /
• v.14 no.4
• /
• pp.251-260
• /
• 2007

The structure changes of the vocal folds are related to the fundamental frequencies (F0). In other words, the increasing in vocal fold length and thickness makes the result of dropping in the F0 during the mutational period. The purpose of this study was to investigate F0 of normal children's voice in mutational period. 360 children (180 boys and 180 girls) were participated in this experiment. The age was ranged from 11 to 16 years. The subjects were asked to produce sustained comer vowels (/a/ /i/ /u/) five times each and the data were analyzed using the MDVP of CSL. The result shows that the F0 are considerably decreased with age and reach to adults' F0 by 16 years in most cases. In particular, the F0 of male subjects were rapidly decreased between the ages from 12 ($226.98\;{\pm}\;19\;Hz$) to 13 years ($169.3\;{\pm}\;25\;Hz$), while the F0 of female subjects were slowly changed from the later period of 12 to 16 years old. This result may be used by the meaning of guideline and lead the basic data to differentiate between normal voice and voice disorder.

• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1152-1154
• /
• 1999

Recently. due to the drastic development of communication method between substations for pilot protective relaying system. The power line carrier(PLC) application is getting obsolete. Consequently, the coupling capacitor voltage transformer (CCVT) loses its necessity for the carrier coupling function, and so wound voltage transformer(VT) can be used to substitute CCVT for voltage signal. However, VT has been reported to give rise to ferro-resonance phenomena, so sufficient consideration on applying the VT to line side is required. This study introduces probable technical problems in using the VT on T/L side, and carries out feasibility study on the basis of modeling results by EMTP(Electro-magnetic transient program)

• Proceedings of the KIEE Conference
• /
• 2004.04a
• /
• pp.33-36
• /
• 2004

세계적으로 전기수요와 전기풀질의 중요성의 증대로 진력설비의 감시 및 보호를 위한 센싱기술에 대한 연구가 활발히 진행되고 있다. 그러나 기존의 전압 및 전류측정 장치인 철심형 변성기는 측정전압이나 전류가 증가될수록 전기적 절연설계가 어렵고 외형 부피가 커질 뿐만 아니라, 측정의 정확도, CT 철심의 자속포화로 인한 사고전류측정의 어려움 등의 문제점이나 단점을 가지고 있어서, 이를 해결하기 위해 센서기술의 개발이 진행되고 있다. 따라서 본 논문에서는 전력설비분야에서의 새로운 센싱기술에 대한 연구개발 동향 및 상용화동향을 분석하고, 이를 통해 국가 과학기술정보의 확산 및 국가 경쟁력 증대에 작으나마 도움이 되고자 한다.

• Proceedings of the KIEE Conference
• /
• 2004.04a
• /
• pp.89-92
• /
• 2004

세계적으로 전기수요와 전기품질의 중요성의 증대로 전력설비의 감시 및 보호를 위한 센싱기술에 대한 연구가 활발히 진행되고 있다. 그러나 기존의 전압 및 전류측정 장치인 철심형 변성기는 측정전압, 전류가 증가될수록 전기적 절연설계가 어렵고 외형 부피가 매우 커질 뿐만 아니라, 측정의 정확도, CT 철심의 자속포화로 인한 사고전류측정의 어려움 통의 문제점이나 단점을 가지고 있어서, 이를 해결하기 위해 센서기술의 개발이 진행되고 있다. 본 논문에서는 전력설비분야에서의 새로운 센싱기술에 관해 조사된 특허정보를 중심으로 과거의 기술흐름과 최근의 기술동향, 출원인 분석을 통한 기술의 우위현황 및 기술의 주요 분포도 등을 도식화된 그래프를 이용하여 다각적으로 분석하고자 한다.