• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.3
• /
• pp.29-37
• /
• 2000

In this paper, the thrust control of PWM Inverter-fed SLIM(Single-sided Linear Induction Motor) is achieved by vector control and PID control with DSP(TMS320C32). SLIM which used as a conveyor has required the quick response and the constant operating without air gap trembling while it conveys load.Thus, SLIM should have the smallest trembling of air gap length. First, voltage equations for SLIM are calculated from the proposed equivalent circuit in this peper, and not only the exciting current but also the thrust component are obtained from them. The thrust current ripple can be reduced by the vector controller using a slip angle frequency, and the PID controller is also use for the position control.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.897-900
• /
• 2007

This paper presents a study on the DSP controller and IGBT inverter driver design for the power-by-wire(PBW) system using BLDC servo motor. This BLDC servo motor system was realized with DSP(Digital Signal Processor) and IGBT inveter module. The PBW system needs speed control of servo motor for linear thrust action. This paper implements a servo controller with vector control and min-max PWM technique. As CPU of controller, TMS320F2812 DSP was adopted because it has PWM(Pulse Width Modulation) waveform generator, A/D(Analog to Digital) converter, SPI( Serial Peripheral Interface) port and many input/output port etc.

• Journal of Industrial Technology
• /
• v.21 no.B
• /
• pp.59-66
• /
• 2001

In this paper, a novel overmodulation strategy for PWM inverters to extend linearity region is presented. The proposed strategy uses the concept of space-vector PWM(SVPWM) based on the zero sequence signal(offset voltage) injection principle. So, by modifying the pole voltage simply, the linear control of inverter output voltage over the whole overmodulation range can be achieved easily. The proposed strategy is so simple that its practical implementation is easy. The validity of the proposed strategy is confirmed by the experimental results.

• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.111-112
• /
• 2013

The three-phase four-leg voltage source inverter (VSI) topology can be an interesting option for the three phase-four wire system. With an additional leg, this topology can handle the neutral current, hence the DC link capacitance can be reduced significantly. In this paper the three dimensional space vector modulation (3D SVM) in ${\alpha}{\beta}{\gamma}$ coordinates for the three-phase four-leg VSI is presented. By using the 3D SVM method, the DC link voltage can be reduced by 16% compared with the split DC link capacitor topology and the output distortion can also be reduced under the unbalanced load condition.

• Proceedings of the KIEE Conference
• /
• 1990.11a
• /
• pp.347-351
• /
• 1990

In this paper voltage source inverter(VSI)-fed induction motor vector control system is controlled by a derived model tracking controller. The system analysis is discussed from the viewpoints of ideal vector control, adoption of model tracking controller and derivation of linear model. Furthermore, the result is obtained by the model-tracking control compare with that of P-I, I-P control.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.6
• /
• pp.299-305
• /
• 2006

In this paper, we suggest a new space vector PWM modulation method with very short processing time which does not need identification of nearest three vectors(NTV) and duty ratio for each vector. The suggested PWM method makes mean value of phase voltage to be same as reference during every modulation period by use of a triangle in small hexagon on multi-level vector space. This paper described the suggested modulation method can be successfully applied to the space vector modulation use of multi-level inverter by computer simulations and experiments.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.543-545
• /
• 1996

In this paper, a voltage and current control scheme of a three-phase voltage source inverter for UPS is described. The inverter provides pure sinusoidal output voltage with very low THD(Total Harmonic Distortion). The proposed controller is designed to robust against the load change, parameter variations, and disturbances using PI controller. The switching pattern is determined to Space Vector Modulation. Finally, the performance of the proposed inverter is shown and discussed by simulation.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.333-335
• /
• 1996

A method for detecting the three-phase currents of a voltage-fed pulsewidth modulated(PWM) inverter is proposed by utilizing only one current sensor placed on the dc-link. The proposed space vector PWM technique is two phase modulated PWM, this enables to detect the phase currents from only one DC link current sensor. The proposed method is simple, reduces the cost, and provides the small detection errors.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.154-156
• /
• 2003

3상 4레그(leg) VSI(Voltage Source Inverter)는 독립된 3개의 출력전압을 합성할 수 있다. 따라서 전압 합성에 있어서 3개의 자유도를 갖는다. 본 논문에서는 3상 4레그 VSI를 위한 PWM방법에 대해서 설명한다. 3상 4레그 VSI를 위한 기존의 PWM기술은 3-D SVPWM으로 그 구현 방법에 있어서 많은 양의 계산과 테이블을 필요로 하였다. 하지만, 본 논문에서 제안 한 방법은 3상 3레그 VSI경우에 적용되었던 옵셋(offset) 전압의 개념을 사용한다. 또한 단일 반송파를 이용하여 폴(Pole)전압과 비교함으로써 PWM을 구현하기 때문에 그 적응이 매우 간단하다. 본 논문에서는 기존의 3-D SVPWM과 제안한 방법이 해석적으로 동일한 방법임을 증명하였으며, 3상 4레그 VSI에서 합성가능한 3자유도의 전압범위를 계산하였다. 마지막으로 이를 실험을 통하여 검증하였다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.764_765
• /
• 2009

본 논문은 매입형 영구자석 동기모터(IPMSM)의 제어 파라미터에 관한 것으로, 종래의 IPMSM의 제어는 $120^{\circ}$ 통전방식의 인버터로 구동되는 구형파 제어를 적용하여 왔으나, 최근 정음화, 저진동화 및 고속 운전영역의 확대 등의 시장의 요구, 제어 기술의 발전으로 정현파 제어 (또는 벡터 제어) 방식이 점차로 확대되는 추세이다. 본 논문에서는 정현파 제어방식에 요구되는 IPMSM의 모터 파라미터에 대해 FEM 해석 결과와 측정 장치에 의한 실측의 결과를 비교 분석하여, IPMSM의 제어 파라미터 도출의 기초 연구 자료로 활용하고자 한다.