• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.8
• /
• pp.1007-1013
• /
• 2010

A new local refinement scheme for spline finite element method has been proposed; this scheme involves the use of hierarchical B-spline. NURBS has been widely used in CAD; however, the local refinement of NURBS is difficult due to its tensor-product property. In this study, we attempted to use hierarchical B-splines as local refinement strategy in spline FEM. The regions of high gradients are overlapped by hierarchically-created local meshes. Knot vectors and control points in local meshes are extracted from global meshes, and they are refined using specific schemes. Proper compatibility conditions are imposed between global and local meshes. The effectiveness of the proposed method is verified on the basis of numerical results. Further, it is shown that by using a proposed local refinement scheme, the accuracy of the solution can be improved and it could be higher than that of the solution of a conventional spline FEM with relatively lower degrees of freedom.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.1
• /
• pp.63-71
• /
• 2004

This research is to reconstruction of railway alignment using GPS data, an investigation is made on the method of optimum simplification for reduction of unnecessary linear data, improve the accuracy by using four simplification algorithms among the methods. By applying two measured of displacement between observed data and it's simplification methods have been evaluated. The results showed that the complexities of lines is not practical to investigate simplification algorithms, the Douglas-Peucker method produced a little displacement between observed data and it's simplification. Its by using the Douglas-Peucker method to observed linear GPS data in railway track, design elements of horizontal alignment have been calculated. Then we could know that obtain the good results fur reconstruction of alignment elements through the methods and algorithns of this study.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.4
• /
• pp.399-405
• /
• 2010

In this paper, the movement faces the problem of the difficult points upon the gaze of the user that corrective action is needed to solve the identification system offers a new perspective. Using the Kalman filter using the position information of the current head position estimated the future. In order to determine the authenticity of the face features of the face structural element information and the processing time is relatively fast horizontal and vertical histogram analysis method to detect the elements of the face. and people grow and infrared bright pupil effect obtained by constructing a real-time pupil detection, tracking and pupil - geulrinteu vectors are extracted.

• Journal of Advanced Navigation Technology
• /
• v.16 no.4
• /
• pp.673-678
• /
• 2012

Traditional culture's researcher has attempting to public use as a various method. Example is design of digital archive and digital contents. However, in spite of this effort, traditional culture's researcher has difficulty to public use. Because traditional culture is hard to understand, and less interest than the other area. Especially, traditional culture has not environment that user can searching and using the culture's information due to difficult to search the data and layers. We propose a design to make an ontology using information profile for digital contents of traditional culture. Also, we use topic-map for the factors of ontology's relation, and specify their relation using topic vector.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.6
• /
• pp.973-980
• /
• 2011

In this paper, we gaze upon the movement faces the problem points are difficult to identify a user based on points and that corrective action is needed to solve the identification system is proposed a new eye. Kalman filter, the current head of the location information was used to estimate the future position in order to determine the authenticity of the face facial features and structural elements, the information and the processing time is relatively fast horizontal and vertical elements of the face using the histogram analysis to detect. And an infrared illuminator obtained by constructing a bright pupil effect in real-time detection of the pupil, the pupil was tracked - geulrinteu vectors are extracted.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.533-536
• /
• 2015

Mobile music market is growing. However, services what are applied recently are inaccurate to recommend music that a user is worth to prefer. So, this paper suggests music recommend system. This system recommend music that users prefer analyzing music information and user's musical propensity and using collaborative filtering. This system classify genre and extract factors what can be get using STFT's ZCR, Spectral roll-off, Spectral flux. So similar musics are clustered by these factors. And then, after divide mood of music's lyric, it finally recommend music automatically using collaborative filtering.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.3
• /
• pp.331-338
• /
• 2016

In this paper, we propose a GRNN(: Generalized Regression Neural Network) algorithms for new eyes and face recognition identification system to solve the points that need corrective action in accordance with the existing problems of facial movements gaze upon it difficult to identify the user and. Using a Kalman filter structural information elements of a face feature to determine the authenticity of the face was estimated future location using the location information of the current head and the treatment time is relatively fast horizontal and vertical elements of the face using a histogram analysis the detected. And the light obtained by configuring the infrared illuminator pupil effects in real-time detection of the pupil, the pupil tracking was - to extract the text print vector.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.3
• /
• pp.8-16
• /
• 2006

This paper discusses design sensitivity analysis and its application to a structural dynamics modification. Eigenvalue derivatives are determined with respect to the element parameters, which include intrinsic property parameters such as Young's modulus, density of the material, diameter of a beam element, thickness of a plate element, and shape parameters. Derivatives of stiffness and mass matrices are directly calculated by derivatives of element matrices. The first and the second order derivatives of the eigenvalues are then mathematically derived from a dynamic equation of motion of FEM model. The calculation of the second order eigenvalue derivative requires the sensitivity of its corresponding eigenvector, which are developed by Nelson's direct approach. The modified eigenvalue of the structure is then evaluated by the Taylor series expansion with the first and the second derivatives of eigenvalue. Numerical examples for simple beam and plate are presented. First, eigenvalues of the structural system are numerically calculated. Second, the sensitivities of eigenvalues are then evaluated with respect to the element intrinsic parameters. The most effective parameter is determined by comparing sensitivities. Finally, we predict the modified eigenvalue by Taylor series expansion with the derivatives of eigenvalue for single parameter or multi parameters. The examples illustrate the effectiveness of the eigenvalue sensitivity analysis for the optimization of the structures.

• Journal of Korea Water Resources Association
• /
• v.30 no.1
• /
• pp.63-73
• /
• 1997

Finite element model is established for the simulation of groundwater flow due to water curtain around underground oil storage Choleski decomposition method. The symmetric global conductance matrix is solved by vector storage Choleski decomposition method. The model is verified through comparison with the results of electric analogy. For the application of this model to real site, the finite element meshes are constructed according to representative vertical cross and longitudinal sections. In cross-sectional analysis, potential and flow distributions are compared based on the cavern pressure and horizontal water curtain. For longitudinal section, effects between nearly located caverns with or without vertical water curtain are analyzed. These results prove that the established model can be used as a tool for flow analysis around underground caverns.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.512-515
• /
• 2010

본 논문에서는 등기하 해석법을 이용하여 설계의존형 하중조건을 갖는 구조물에 대한 형상 최적설계를 수행하였다. 유한요소법 기반 형상 최적설계는 CAD 모델과 해석 모델의 차이로 인해, 설계영역 매개변수화에 어려움이 있다. 등기하 해석법은 CAD 모델과 동일한 NURBS 기저 함수와 조정점을 해석에 이용함으로써 설계의 기하학적 변화를 해석모델에 직접적으로 표현할 수 있는 장점을 가진다. 하중조건이 설계 영역이 변화함에 따라 변하는 최적설계 문제의 경우, 정확한 설계 영역 표현은 법선 벡터, 즉 변화하는 하중의 방향과 곡률과 같은 고차항의 정보를 정확하게 표현할 수 있고, 따라서 목적함수를 최소 또는 최대화시키는 최적의 해로 이끌어 낸다. 유한요소법 또는 밀도법을 이용한 형상 최적설계에서 설계의존형 하중조건을 갖는 구조물의 문제를 푸는 경우, 최적설계가 진행됨에 있어 변화하는 경계의 부정확성 때문에 정확한 설계민감도를 얻기가 어려운 점이 있다. 본 논문에서는, 수치 예제를 통해 등기하 해석 기반의 형상 최적설계 방법론이 설계의존형 하중조건을 갖는 구조물 문제에서 수월성을 가짐을 확인하였다.