• Computational Structural Engineering
• /
• v.11 no.3
• /
• pp.173-185
• /
• 1998

본 연구에서는 자동차엔진 및 트랜스미션 성능시험을 위한 다이나모 베드구조물을 분석하고 설계하였다. 해석상에 고려된 베드구조물은 Ⅰ형강 구조물, 보강된 박스구조물 그리고 블록구조물로 제작되었으며, 시험을 위한 엔진 및 트랜스미션은 베드상판에 장착된다. 엔진구동시 회전에 의한 진동이 발생된다. 공진을 피하기 위해 베드구조는 충분한 구조적 일체성을 가져야 한다. 본 연구에서는 베드 구조물의 응력, 변위 그리고 자유진동해석이 ANSYS Code를 이용한 유한요소해석이 수행되었다. Ⅰ형강 구조형 베드 구조물에서 최대 응력은 23.2MPa에서 90.3MPa까지 나타났으며, 최대 처짐은 0.25㎜에서 0.92㎜까지 나타났다. 박스 구조형 베드 구조물에서 최대 응력은 0.028MPa에서 0.259MPa까지 나타났으며, 최대 처짐은 0.031㎜에서 0.413㎜까지 나타났다. 그리고 박스구조형 베드 구조물에서 최대 처짐은 0.92MPa에서 2.15MPa까지 나타났으며, 최대 처짐은 1.1㎜에서 2.7㎜까지 나타났다. 모든 구조물이 응력과 처짐 값에서 매우 안정적인 범위 내에서 발생됨을 볼 수 있었다. 구조진동해석에서 Ⅰ형강 베드구조물의 고유진동수는 112.03㎐에서 141.66㎐까지의 범위에 발생되었다. 박스 구조형 베드구조물에서의 고유진동수는 396.93㎐에서 755.11㎐까지의 범위에서 발생되었다. 마지막으로 블록구조형 베드구조물에서는 266.51㎐에서 244.67㎐까지의 고유진동수를 찾을 수 있었다. 모든 구조물에서 베드구조물의 무게증가에 따른 기본진동수는 증가된다. 베드시스템의 지지기초시스템은 2자유도계 시스템으로 설계되었으며, 다양한 질량변화 및 스프링상수 변화에 따른 진동해석을 수행하였다. 질량비가 증가될수록 고유진동수는 크게 감소되며, 스프링상수가 증가될수록 고유진동수는 감소된다.

• Journal of Bio-Environment Control
• /
• v.15 no.3
• /
• pp.225-230
• /
• 2006

Tomatoes were experimented in perlite bags for various irrigation control methods to elucidate the efficient method for nutrient solution management. The irrigation control methods were for 3 different types such as control by drainage level sensor (PROBE), control by integrated solar radiation (ISR), and control by time clock (Timer). The substrate weight was maintained stably in the proper range in PROBE treatment, regardless of daily solar radiations or growth stages. The bed weights in the treatments of ISR and Timer were changed largely. Growth as well as total yield was the highest in PROBE treatment. There was no difference in soluble solids (Brix %) among the treatments. Consequently, ISR control could be useful only with appropriate timer control and also calibration. Control by drainage level sensor was suggested to be the most satisfactory as irrigation management method.

• Horticultural Science & Technology
• /
• v.34 no.2
• /
• pp.228-235
• /
• 2016

This study was conducted to determine the yield of cherry tomato (Solanum lycopersicum Mill.) grown at three planting times during the uncultivated period of strawberry. Cherry tomato was planted under condition filled with strawberry dedicated culture medium on a two-story bed with April 20, April 30, and May 10 at 2015. Fruit harvest was completed on July 31. The supply concentration of nutrient solution at the time of transplanting was started as EC $1.2dS{\cdot}m^{-1}$ and it was gradually increased to EC $2.5dS{\cdot}m^{-1}$ after blooming of the first flower cluster. Netherlands PBG solution was supplied for one minute six times per day. The heights of cherry tomato plants planted at earlier were significantly greater than those of tomato plants planted later. The heights of cherry tomato plants grown at the bottom of the bed were greater than those grown in the upper bed. The yield of cherry tomatoes planted on April 20 at the bottom of the bed was greatest with an average of 2,954 g of tomatoes per plant. There were no significant differences in the average weight and sugar content of fruit according to planting times and bed position. The yield of cherry tomato plants planted on April 20 was 18% and 34% higher than that of plants planted on April 30 and May 10. We confirmed to increase the yield of the cherry tomato when early plants planted on two-story bed. These results indicate that farmers can choose the best period of producing cherry tomato during the un-cultivated period of strawberry under two-story bed conditions.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.6
• /
• pp.447-451
• /
• 2004

This study was conducted to establish the proper techniques of the recirculating wick hydroponics for safe seed tuber proliferation of potatoes (Solanum tuberosum L. CV. Dejima). To achieve these, several intact tubers (5, 10 and 20 g) and cut seed-pieces (two or four) were treated in wick hydroponic system beds. A polystyrene box (31cm in width, 20cm in height, 51cm in length, and $0.031m^3$ in volume) was placed on a styrofoam hox. Eight wicks $(width\;1.5cm\;{\times}\;length\;40cm) $ were put into each polystyrene hox and the boxes were filled with perlite + peatmoss (1 : 2, v/v) medium. Top fresh weight per plant increased with increasing the tuber size from 10 to 30g/tuber. As the tuber size increases from 10 to 30 g/tuher in case of uncut tuber, the marketable tuber (>5g) production per plant increased from 83.8 to 141.8 g/plant and the marketable tuber (>5g) production per plant of cut tuber was slightly higher than that of uncut treatment. Total tuber yield ranged from 4.16 to $6.56kg/m^2$ and the percentage of seed tubers was greater than $97\%$ for all treatments. These results indicate that seed tuber should be cut to produce large tuber $(\geq10g)$ in the recirculating wick hydroponic system.

• Journal of Bio-Environment Control
• /
• v.22 no.3
• /
• pp.234-240
• /
• 2013

The purpose of this study was to provide basic data used in greenhouse design, and for this purpose, the crop loads of tomato and paprika which have high crop load among crops cultivated in greenhouse were measured. The maximum differences in lowest and mean temperatures between cultivation year and normal years for winter season were -5.6 and $-4.9^{\circ}C$, respectively and those for summer season were 3.0 and $1.5^{\circ}C$, respectively. The calibration of push & pull gauge indicated approximate 0.99 of coefficient of determination, representing very high association. The planting densities of paprika and tomato were 3.43, 3.56 and $2.13plants{\cdot}m^{-2}$, respectively. The yields were 4.1, 4.3 and $16.2kg{\cdot}plant^{-1}$, corresponding to 14.1, 15.2 and $34.5kg{\cdot}m^{-2}$ of yield per unit area. The maximum loads were 1.3, 1.5 and $3.3kg{\cdot}plant^{-1}$, respectively. When the paprika were hanged on cross beam, the total crop load applied to it was estimated to be $15.3{\sim}15.9kg{\cdot}m^{-2}$, and when the weights of gutters supporting the cultivation beds, the total weights were $26.0{\sim}26.9kg{\cdot}m^{-2}$.

• Journal of Sericultural and Entomological Science
• /
• v.33 no.2
• /
• pp.68-71
• /
• 1991

Mulberry cuttings from shoots of Shinkwangppong(Morus bombycis koidz.) had been callused in vermiculite separately at 15, 20, 25 and 30$^{\circ}C$ for 15 days before transplanting them in greenhouse to make clear the effect of temperature on root formation and growth is as follow. The buds of cuttings started sprouting in 4 and 6 days of callusing at 30 and 25$^{\circ}C$, respectively, reaching 100% budding in 10 and 15 days of callusing. Budding was delayed, however, at low temperature, showing 86% and 92% at 15 and 20$^{\circ}C$, respectively, in 15 days. Rooting from the cuttings was also accelerated at high temperature, showing 97-100% rooting at 25$^{\circ}C$ and 30$^{\circ}C$, in 15 days of callusing but no more than 93% at low temperature even in 35 days. Although high temperature increased root number and length after 15 days in callusing, no differences showed in the number and the weight at more than 20$^{\circ}C$ in 35 days of cuttings.

• Journal of Bio-Environment Control
• /
• v.22 no.4
• /
• pp.408-412
• /
• 2013

This study was carried out to investigate damp injury caused by tomato coir bag culture and prevent that. The tomato variety was used 'Minichal', and tomatoes were grown in greenhouse. The nutrient solution based on Yamazaki Tomato Standard Solution was irrigated from one hour after sunrise to two hour before sunset. The slits for darainage were made in three types; I, L, and bottom slit type. The coir bag of I and L type had six slits of 15cm length, that of bottom slit type had three slits of 15 cm length. The weight of coir bag in 24 hours after saturation was 14.2 kg in I type, 13.8 kg in L type, and 12.8 kg in bottom slit type, but there was not significant difference. The weight of coir bag after one day irrigation was 14.5 kg, 14.2 kg, and 13.3 kg at L, I, and bottm slit type, respectively. This means that the moisture content of coir bag during cultivation was lowest in bottom slit type. The number of adventitious root on stem was 160, 170, and 53 at I, L, and bottom slit type, respectively. The dry weight of root and root length were highest at bottom slit type, compared to other treatment. The marketable yield was highest 26.5 kg/20 plant in bottom slit type. For increasing yield and preventing damp injury, bottom slit type was most effective at U type bed coir bag culture.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.1
• /
• pp.60-65
• /
• 2017

This study was conducted to dentify the optimum plantlet type of 'Solara' potatoes (Solanum tuberosum L.) for growth in an aeroponics system. Plantlets of 'Solara' were transplanted on March 16, 2015 in a greenhouse, and growth and yield characteristics were investigated at 70 and 78 days after transplanting, respectively. Stem length was shorter in plantlet of 15-day-old stem cuttings and acclimatization of culture, and the stem length of plantlets of stem cuttings tended to increase with increasing stem cutting age. The fresh weight of plants was the highest in the plantlets of 40-day-old stem cuttings and the lowest in non-rooted stem cuttings and acclimatization of culture. The highest number of first stolons was obtained in 35-day-old stem cuttings. The number of second stolons was the highest in plantlets of 35-day-old stem cuttings, acclimatization of culture, and 30- day-old stem cuttings. The total number of tubers was higher in plantlets of 35-day-old stem cuttings and acclimatization of culture, and the number of tubers above 3 g was the highest in plantlets of 35-day-old stem cuttings. The weight of tubers above 3 g was the heaviest in plantlets of 35-day-old stem cuttings(1,947 g per 10 plants), followed by plantlets of 30-day-old stem cuttings. These results indicate that plantlets of 30 to 35-day-old stem cuttings could be the best for production of 'Solara' potato tubers in an aeroponics system.