• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.3
• /
• pp.374-382
• /
• 2001

The purpose of this study was to investigate the surface morphology and measure shear bond strength of Er : YAG lased enamel. To determine the most effective energy density of laser for improving bonding strength of human enamel, 24 specimen were lased from 30mJ to 150mJ at 1Hz used focused, defocused beam. After irradiation, the lased specimen were observed scanning electron microscope. To determine the resin shear bond strength of Er : YAG lased enamel, the 90 specimen were divided into 3 groups. The Control group was etched with 37% phosphoric acid for 15seconds and rinsed. Group 1 was only laser irradiaton(60mJ, 10Hz), Group 2 was irradiated as Group 1 regimen, followed 37% phosphoric acid etching. The following results were obtained: 1. In both focused and defocused Er : YAG lased enamel surface are similar to acid-etched enamel more than 60mJ in SEM evaluation. 2. The more increased laser energy, the more observed fissuring surface. 3. The highest mean shear bond strength value was observed in control group with the statistical significance(p<0.05) between all the other groups and the shear bond strength in group 1 was the lowest with significant difference among the other groups.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.4
• /
• pp.597-605
• /
• 2006

It is introduced that pit and fissure sealant is the most universal and effective to prevent occlusal dental caries. In processing of being applied the pit and fissure sealant, the various kinds of methods are developed to remove organic matters, plaque, microflora and debris in the pit and fissure for increasing the rates of maintain the sealant. Recently, the Er:YAG laser has been used as a new enamel surface treatment method. The purpose of this thesis is compared whether that enamel surface treatment method is superior to other methods or not. 1. 100mJ 5Hz Er:YAG lased enamel surface was similar to acid-etched enamel in SEM evaluation. 2, Mechanical preparation showed decreased microleakage when compared with acid-etching only, but no significant differences in both method. 3. After laser and acid-etching method showed decreased microleakage when compared with acid-etching only.

• The korean journal of orthodontics
• /
• v.40 no.4
• /
• pp.212-226
• /
• 2010

Objective: The aim of this study was to evaluate the effect of remineralization and inhibition to demineralization after fluoride gel (acidulated phosphate fluoride, APF) or hydroxyapatite (HAp) paste application on interdentally stripped teeth. Methods: After interdental stripping, 1.23% APF or 5%, 10% HAp paste were applied for 7 days for remineralization. Afterwards, teeth were exposed to lactate carbopol buffer solution for demineralization. Scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS) were used to compare change in surface contents and crystal structures after remineralization, and then after demineralization. Results: EDS analysis indicated that calcium (p < 0.001) and phosphate (p < 0.01) contents were increased after 10% HAp paste application on stripped enamel, calcium (p < 0.05) and phosphate (p < 0.01) contents were increased after 5% HAp paste application, and fluoride (p < 0.01) contents were increased after 1.23% APF application. SEM image showed that enamel surfaces became smoother and crystal structures became small and compact after APF or HAp application. After demineralization, calcium (p < 0.05) and phosphate (p < 0.05) contents remained increased on the enamel remineralized with 10% HAp paste, and phosphate (p < 0.05) contents remained increased on the enamel remineralized with 5% HAp paste. After demineralization, surfaces looked less destroyed in the enamel remineralized beforehand than those of the control, and small pores between crystal structures, formed by remineralization were remained. Conclusions: Hydroxyapatite paste and fluoride gel were helpful to remineralize and inhibit deminerlization on stripped enamel.

• The korean journal of orthodontics
• /
• v.25 no.3 s.50
• /
• pp.341-353
• /
• 1995

Previous study had shown the diversities in the propriety for optimal bond strength on the concentration of the etchant. The aim of present study in vitro was to evaluate and compare the shear bond strength of orthodontic brackets to enamel and to measure the depth of etch on the phosphoric acid concentrations. A hundred and seventy six extracted bovine lower centrals were ground to yield flat surfaces and etched by the concentration $0%,\;5%,\;10%,\;20%,\;30%,\;40%,\;50%,\;60%,\;70%,\;80%\;and\;85\%$ of phosphoric acid respectively during 60 seconds. The shear bond strength of orthodontic brackets, the depth of etch and surface roughness of the enamel were measured, and scanning electron microscopic observations on the etched enamel surfaces were carried out. The data obtained from the very experiments were processed and statistically analyzed and evaluated. The gradual increase in the depth of etch to enamel as the accretion of the concentration of the phosphoric acid upto $40-50\%$ and decline henceforth were manifested. The surface roughness showed no correlation with the depth of etch, yet moderate correlation with the shear bond strength of brackets. Scanning electron microscopic investigation revealed that morphological patterns of the etched enamel surfaces for $5\%\;to\;40\%$ of concentrations were even and homogenous, and those for $50\%$ as well as $60\%$ exhibited the overetched and unhomogenous. The shear bond strengths kom $10\%\;to\;60\%$ of concentration showed no statistically significant differences. It was suggested that the shear bond strengths at $5\%\;and\;70\%$ were sufficient to tolerate the force levels of the ordinary orthodontic treatment notwithstanding to be significantly lower than those from $10\%\;to\;60\%$ phosphoric acid solution.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.3
• /
• pp.381-390
• /
• 2004

The purpose of this in vitro study was to investigate the effects of Nd:YAG laser irradiation and fluorides on acid drink demineralized enamel. The materials were 30 freshly extracted permanent premolars with intact smooth enamel surfaces. They were demineralized with Coca-cola at $37^{\circ}C$ for 12hours and then irradiated by Nd:YAG laser with 6W power, $50mJ/cm^2$ energy density, and 20Hz pulse repetition. After laser irradiation, teeth were treated by three kinds of fluorides; (1)0.05% NaF fluoride solution (2)1.23% APF gel and (3)0.1%F fluoride varnish, microhardness(VHN) and Diagnodent scores were measured and the surfaces of each treated specimens were also observed with SEM under 1500 magnification. The results were as follows: 1. In the change of microhardness(VHN), it decreased to 34.68% from the initial micrhardness, increased to 78.37% after laser irradiation and increased to 82.62% after fluoride treatment, there were significant differences except when it was irradiated and treated with fluoride(P<0.05). 2. In the change of Diagnodent scores, it was decreased to 28.08% from the initial scores after demineralization, and then increased to 59.81% after laser irradiation, and increased to 82.17% after fluoride treatment. Scores were different significantly between the scores of initial, demineralization, laser irradiation and fluoride treatment(P<0.05). All the scores were not different significantly between fluoride types. 3. SEM observation showed that the lased enamel surfaces after demineralization were thermally degenerated and showed molten lava-like appearance and crater with cracks and many microholes.

• The korean journal of orthodontics
• /
• v.28 no.6 s.71
• /
• pp.947-954
• /
• 1998

The purpose of this study was to compare shear bonding strengths and debonding patterns of the ceramic brackets attached on the crystal which were grown on the enamel surface of a tooth with different concentrations of lithium sulphate-contained polyacrylic acid in different application times. Four kinds of concentrations of mixed solutions were made and applied to the enamel surface on extracted human premolars. The solutions were made by adding 0.3M or 0.6M of lithium sulfate to $50\%\;or\;65\%$ of polyacrylic acid with 0.3M sulfuric acid. The solutions were applied for 30 or 60 seconds. After bonding, a universal testing machine was used to measure the shear bond strength, and then observations were made of debonding patterns through the stereoscope. And the enamel surface was observed through the scanning electron microscope to examine the pattern of crystal growth and debonding. The results were as follows: 1. Shear bond strength in the enamel surface treated with $50\%$ polyacrylic acid was higher than that with $65\%$ polyacrylic acid. 2. There were no statistical differences in shear bond strength according to concentration of lithium sulfate and application time of solutions . 3. Enamel surface was almost free of resin debris after debonding. 4. Enamel surface treated with $50\%$ polyacrylic acid showed higher density of crystal growth than that with $65\%$ polyacrylic acid under scanning electron microscope.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.44 no.3
• /
• pp.272-279
• /
• 2017

This study aimed to evaluate the microleakage and penetration of two hydrophilic sealants, Embrace $Wetbond^{TM}$ and Ultraseal $XT^{(R)}$ $hydro^{TM}$, when applied on dry and moist enamel, as compared to a conventionally used hydrophobic sealant, $Clinpro^{TM}$. A total of 60 sound human third molars were randomly divided into 5 groups according to the enamel moisture control and the sealant material used. After sealant application, the teeth were thermocycled and immersed in 1% methylene blue dye. Subsequently, the teeth were sectioned twice and the sections were examined using an optical microscope and image analysis software. Application of Embrace $Wetbond^{TM}$ on either dry or moist enamel resulted in more microleakage than $Clinpro^{TM}$. Application of Ultraseal $XT^{(R)}$ $hydro^{TM}$ on dry enamel showed a similar level of microleakage to $Clinpro^{TM}$, but application on moist enamel resulted in more microleakage. There were no significant differences between the groups in penetration. In conclusion, application of hydrophilic sealants on moist enamel did not improve the sealing ability and showed lower sealing ability than that of $Clinpro^{TM}$ applied on dry enamel.

• Journal of dental hygiene science
• /
• v.15 no.4
• /
• pp.419-423
• /
• 2015

Recently, energy drink consumption is rising. The purpose of this study was to examine the effect of energy drink on enamel erosion by measuring pH and titratable acidity in energy drink on the market. pH and titrable acidity in drink were measured by selecting 3 kinds of energy drinks with high sales volume among energy drinks on the domestic market. To evaluate the erosion level of normal enamel, the erosion level was measured by using a surface micro-hardness after soaking it in drink for 1 minute, for 3 minutes, for 5 minutes, for 10 minutes, and for 30 minutes while using 10 pieces of bovine specimens per each group. All the energy drinks were containing citric acid. As for pH in drinks, pH of Burn intense was the lowest with $2.51{\pm}0.01$. Hotsix stood at $3.16{\pm}0.01$. Redbull stood at $3.37{\pm}0.00$. In pH 5.5, the titrable acidity of Burn intense was 3.59 ml. Redbull was 3.43 ml. Hotsix was 1.92 ml. All the energy drinks were reduced the surface micro-hardness according to a rise in time of immersion. Following the 30-minute treatment in drinks, the surface micro-hardness value was indicated to be the lowest in Redbull with $119.72{\pm}15.16$ VHN. It was shown to be in order of Hotsix $208.75{\pm}10.99$ and Burn intense $210.47{\pm}8.01$. Hotsix and Burn intense had no statistically significant difference (p>0.05). Accordingly, all the energy drinks, which were used in the experiment, caused the tooth enamel erosion. Among them, Redbull led to the largest enamel erosion. Thus, energy drink containing citric acid and low pH can cause the enamel erosion. However, it is thought to be necessarily progressed by considering factors of influencing etching a little more diversely by additionally analyzing intraoral factors, acid kinds, and even the content in calcium, phosphate and fluoride.

• Journal of dental hygiene science
• /
• v.17 no.4
• /
• pp.352-357
• /
• 2017

Consumption of liquid digestive medicine has continually grown in recent years. This present study was designed to evaluate the capability of liquid digestive medicine to erode dental enamel, relating the pH and titratable acidity of liquid digestive medicine. Three commercially available liquid digestive medicines were chosen these were Gashwalmyeungsu, Saengrokchun and Wicheongsu. The liquid digestive medicines were evaluated in respect to pH, titratable acidity and concentrations of calcium and phosphate, respectively. This measure was carried out three times for each digestive medicine and was recorded the data as mean (standard deviation). Bovine enamel specimens measured microhardness at base line and then were randomly assigned to 4 groups of 10 each. The specimens were immersed into each liquid digestive medicine for 1, 3, 5, 10, 15, and 30 minutes and then evaluated each time by VHN. All digestive medicines had a pH of less than 3.7. Wicheongsu had the lowest pH 2.93 and Gashwalmyeungsu had highest pH 3.63. In pH 5.5, titratable acidity of Wicheongsu was 1.27 ml. Gashwalmyeungsu was 0.63 ml. Saengrokchun was 0.60 ml. All liquid digestive medicines showed low concentration of calcium and phosphate. The microhardness of specimens after immersion into liquid digestive medicines was continuously reduced in all digestive medicines. After 30-minute treatment in liquid digestive medicines, Wicheongsu containing low pH and high tiratable acidity was shown to be lowest microhardness value ($207.80{\pm}15.52$). The three liquid digestive medicines caused surface softening of enamel erosion. We conclude that drinks, commonly consumed by functional dyspepsia patient can cause erosion of enamel.

• The korean journal of orthodontics
• /
• v.2 no.1
• /
• pp.23-28
• /
• 1971

In this study, sections of twenty eight teeth were used to investigate the effect of topical application of $8\%$ stannous fluoride on the decalcification rate of enamel surfaces stripped in a manner suggested for orthodontic purpose. The enamel treated with a single application of a fluoride had a significantly lower tile rate of decalcification for the first 96 hours to lactate buffer solution. After double application of fluoride, decalcification rate decreased signicantly. This study suggested that the continuing protection of stripped surfaces should be sought by regularly scheduled treatment of the enamel with the topical application of fluoride and regular use of a fluoride containing dentifrice.