• Journal of Wetlands Research
• /
• v.7 no.1
• /
• pp.107-117
• /
• 2005

Soil erosion is influenced from a variety of factors such as rainfall distribution, soil type, land use, etc. This paper is aimed at analyzing the soil erosion hazard zone in cropland. RUSLE was used for an analysis of soil erosion amount, and for the spatial data of basin, soil erosion amount was calculated by extracting the respect topography space related factors of RUSLE using DEM, Landuse, Soil map as base map. This paper is targeting at the watershed of Gyeongan stream in Gyeonggi-do The result of an analysis of soil erosion amount showed that soil erosion occurred in the order of crop field(1210) planting area, orchard(1220), non-adjusted paddy fields(1120), and adjusted paddy fields(1110), and also the average soil erosion in these planting areas has the most amount in crop field planting area. As a result of analysis on soil erosion hazard zone of farm land by classifying it into 5 classes using the result of that result of analysis on the amount of soil erosion, in case of Class 5 in which the hazard of soil erosion is the highest, approximately 72.5ha that corresponds to 2.4% of the total farm land was decided as erosion hazard zone. For this erosion hazard zone, it was analyzed that dry field crop planting area was 72.4ha and orchard was 0.1ha, and Class 5 hazard zone did not appear in other farming areas. Also, it showed that Class II(1~50ton/ha/yr) area had the most ratio of the entire farm land, i.e., 70.2%, regardless of land use state. According to the result of analysis on soil erosion hazard zone of farm land by classifying it into 5 classes, the Class V has the highest soil erosion hazard, approximately 72.5ha that corresponds to 2.4% of the total farm land was estimated as an erosion hazard zone. This erosion hazard shows 72.4ha in dry field crop planting area, 0.1ha in an orchard, but the highest hazard zone, the Class V was not shown in other farming areas. Also, it showed that Class II area had the most ratio of the entire farm land, i.e., 70.2%, regardless of land use state.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.5
• /
• pp.704-710
• /
• 2012

The lower portion of sloping paddy fields normally contains excessive moisture and the higher water table caused by the inflow of ground water from the upper part of the field resulting in non-uniform water content distribution. Four drainage methods namely Open Ditch, Vinyl Barrier, Pipe Drainage and Tube Bundle for multiple land use were installed within 1-m position from the lower edge of the upper embankment of sloping alluvial paddy fields. This study was conducted to evaluate soil physical characteristics by drainage improvement in poorly drained sloping paddy field. The results showed that subsurface drainage by Pipe Drainage improves the productivity of poorly drained soils by lowering the water table and improving root zone soil layer condition. In an Pipe drainage plot, soil moisture drained faster as compared to the other drainage methods. Infiltration rate showed high tendency to Piper Drainage method about $20.87mm\;hr^{-1}$ than in Open Ditch method $0.15mm\;hr^{-1}$. And Similarly soil water and degree of hardness and shear strength phase of soil profile showed a tendency to decrease. From the above results, we found that when an subsurface drainage was established with at 1m position from the lower edge paddy levee of the upper field in sloping poorly drained paddy fields Pipe Drainage was the most effective drainage system for multiple land use.

• The korean journal of orthodontics
• /
• v.31 no.4 s.87
• /
• pp.425-438
• /
• 2001

The delivery of optimal orthodontic treatment is greatly influenced by clinician's ability to predict and control tooth movement by applying well-known force system to dentition. It is very important to determine the location of the centers of resistance of a tooth or teeth in order to have better understanding the nature of displacement characteristics under various force levels. In this study, three dimensional finite element analysis was used to measure the initial displacement of the consolidated teeth under loading. The purpose of this study was to define the location of the centers of resistance at the upper six anterior segment. To observe the changes of six anterior segment, 200gm, 250gm, 300gm, and 350gm forces at right and left hand side each were imposed toward lingual direction. For this study, two cases, six anterior teeth and six anterior teeth after corticotomy, were reviewed. In addition, it was reviewed the effects of changes on the location of the center of resistance in both cases based on different degree of forces aforementioned. The results were that : 1. The instantaneous center of resistance for the six anterior teeth was vertically located between level 4 and level 5, which is, at 6.76mm, $44.32\%$ apical to the cementoenamel junction level. 2. The instantaneous center of resistance for the six anterior teeth after corticotomy was located vertically between level 4 and level 5, that is, at 7.09mm $46.38\%$ apical to the cementoenamel junction level. 3. Changes of force showed little effect on the location of the center of resistance in each case. 4. It was observed that the location of the instantaneous center of resistance for the six anterior teeth after corticotomy was changed more than the six anterior teeth without corticotomy to the apical part, and the displacement of the consolidated anterior teeth moved further in case of the consolidated teeth after corticotomy.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.1
• /
• pp.78-86
• /
• 2009

Recently, there seems to besome problems in the urban visual landscape as a result of continuous economic growth and industrial development. At the same time, the public has begun to be aware of the importance of visual resources, and the necessity for visual landscape conservation and improvement. Therefore, the development of evaluative indicators for systematic visual landscape planning and design is urgent. The purpose ofthis study is to discover evaluative models and indicators for the diagnosis of urban visual landscapes. This study included the selection of 18 physical indicators(statistical data) by literature reviews, adoption of field and questionnaire surveys at 12 autonomous districts in Seoul and surrounding major mountain valleys and river streams(i.e. Mt. Nam and Han-River). The content of the questionnaire is scenic beauty. Moreover, the linear regression analysis between the scenic beauty mean scores and the physical indicator scores figure out the scenic beauty prediction model. As this study suggests, the most important indicators in urban visual landscapes are 'Greens', 'Park' and 'the number of apartment buildings(higher than 20 stories).' Based on the results, greens and parks should be priority elements to considerin urban landscape planning and design. Moreover, since the number of apartment buildings that are higher than 20 stories has a negative correlation with the scenic beauty score, it can be used as basic data for landscape planning. For the scenic beauty prediction models and evaluative indicators suggest a direction of urban management, each indicator becomes basic data for visual landscape planning and design. In following studies, if physical indicators and case studies are added, the scenic beauty prediction models and evaluative indicators could be more synthetic and systematic. Moreover, the development of physical indicators in three dimensions(3D)(i.e. results from visual district analysis, view surface analysis) could be expected to obtain more general and varied results.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.1
• /
• pp.3-14
• /
• 2015

Since the global financial crisis, the Korean domestic construction market has continuously experienced downturns, and the Korean domain construction firms'profitability has been persistently deteriorated. Domestic construction firms have rapidly advanced to overseas markets exclusively for the construction contract packages. However, the profitability for the construction contracts has been lower compared to engineering or project management contracts. One of the critical issues the Korean firms have faced was project management capability across all phases in project execution. Even though several project management capability assessment tools were introduced, most tools were applicable to a wide variety of industry sectors rather than construction industry. Project management capability assessment tool specifically applicable to domestic CM firms was developed through this research, in order to assess project and program management capabilities and improve the competitiveness in overseas market Also, the correlation between project, programs, and the CM infrastructure were identified. The CM firms were divided into two groups according to the size of the business, and both were evaluated at the project and the program level based for the 9 different criteria. The project management capability assessment tool developed for the CM firms can be used for self-assessment to distinguish the strengths and weaknesses of each company at the project and program level. In addition, the current status of each group can be identified by spotting improvement areas for the management capabilities.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.1
• /
• pp.46-52
• /
• 2009

Statement of problem: Recently, titanium has become popular as superstructure material in implant dentistry because titanium superstructure can be easily milled by means of computer-aided design and manufacture (CAD/CAM) technique. But retention form such as nail head or bead cannot be cut as a result of technical limitation of CAD/CAM milling and bond strength between titanium and porcelain is not as strong as that of conventional gold or metal alloy. Purpose: The objective of this study was to evaluate the shear bond strength of three different materials: heat curing resin, composite resin, porcelain which were bonded to grade II commercially pure Titanium (CP-Ti). Material and methods: Thirty seven CP-Ti discs with 9 mm diameter, 10 mm height were divided into three groups and were bonded with heat curing resin (Lucitone 199), indirect composite resin (Sinfony), and porcelain (Triceram) which were mounted in a former with 7 mm diameter and 1 mm height. Samples were thermocycled for 1000 cycles at between $5-55^{\circ}C$. Shear bond strength (MPa) was measured with Instron Universal Testing Machine with cross head speed of 1 mm/min. The failure pattern was observed at the fractured surface and divided into adhesive, cohesive, and combination failure. The data were analyzed by one-way ANOVA and Scheffe's multiple range test (${\alpha}=0.05$). Results: Lucitone 199 ($17.82{\pm}5.13\;MPa$) showed the highest shear bond strength, followed by Triceram ($12.97{\pm}2.11\;MPa$), and Sinfony ($6.00{\pm}1.31\;MPa$). Most of the failure patterns in Lucitone 199 and Sinfony group were adhesive failure, whereas those in Triceram group were combination failure. Conclusion: Heat curing resin formed the strongest bond to titanium which is used as a CAD/CAM milling block. But the bond strength is still low compared with the bond utilizing mechanical interlocking and there are many adhesive failures which suggest that more studies to enhance bond strength are needed.

• Journal of Korean Society of Forest Science
• /
• v.89 no.5
• /
• pp.645-654
• /
• 2000

The aim of this study was to described the genetic structure of Eleutherococcus senticosus in Korea. We investigated 10 patches, which are eight Korean patches and two foreign patches come from Russia and China growing at Korean habitat, using ISSR(inter-simple sequence repeats) markers. In ISSR PCR, the overall percentage of polymorphic ISSR amplicons was 76% and the mean number of amplicons per ISSR primer was 11.5, which were higher than the RAPD results for the some cultivars collected in Korea(Kim et al., 1998) ; 57% and 5.7, respectively. So ISSR markers provide more powerful tool than RAPD markers for the investigation of genetic variation in E. senticosus. There are relatively high genetic variation among patches as 62.8%, but low variation within eight Korean patches. Such pattern of genetic variation, which is not ordinary in other tree species, may be result from the narrow and limited habitats and the asexual reproduction of this species at the natural stands in Korea. Although the small sample size in this study seemed to be resulted in the high genetic variation among patches, the overall genetic interpretation of this study might not be much affected on the basis of the characteristics of the distribution and the reproduction system of E. senticosus. Analysis of genetic distance between all pairs of the patches did not reveal any trends with regard to geographic distance, which was confirmed by the results obtained from AMOVA(analysis of molecular variance) and PCA(principal component analysis). These results suggest that, in addition to the preservation of the natural stands, the conservation of larger number of patches with small number of individuals per patch is more effective for the ex situ conservation and for maintaining the genetic diversity of E. senticosus in Korea than smaller patches with large number of individuals.

• Clinical and Experimental Reproductive Medicine
• /
• v.24 no.1
• /
• pp.83-93
• /
• 1997

Although IVF-ET is widely applied in the treatment of couples with male factor infertility, it may fail in many infertile couples with normal semen parameters, and certain couples cannot be accepted for standard IVF-ET due to unfertilization or extremely low fertilization rate of oocytes. Recently, several procedures of microassisted fertilization (MAF) using micromanipulation have been introduced, and pregnancies and births have been obtained after partial zona dissection (PZD), subzonal insertion (SUZI), and intracytoplasmic sperm injection (ICSI). This clinical study was performed to develop and establish ICSI as an effective procedure of MAF in infertile couples who could not undergo standard IVF-ET repetitively because of failure in fertilization or extremely low fertilization rate of oocytes with the conventional fertilization technique in the previous IVF-ET cycles. From March, 1995 to May, 1996, 27 cycles of IVF-ET with ICSI in 19 infertile patients were included in study group, and the outcomes of ICSI were analyzed according to fertilization rate, cumulative embryo score (CES), and pregnancy rate. The number of oocytes retrieved after controlled ovarian hyperstimulation (COH) was $10.50{\pm}6.13$ in 30 previous cycles, and $10.57{\pm}5.53$ in 27 ICSI cycles. In ICSI cycles, the number of oocytes optimal for ICSI procedure was $7.89{\pm}4.30$, and the fertilization rate of $67.9{\pm}20.2%$ could be obtained after ICSI. The number of embryos transferred was $1.43{\pm}2.40$ in previous cycles, and $4.36{\pm}1.77$ with the mean CES of $41.8{\pm}27.4$ in ICSI cycles. In ICSI cycles, the overall pregnancy rate was 29.6% (8/27) per cycle and 42.1% (8/19) per patient with the clinical pregnancy rate of 22.2% (6/27) per cycle and 31.6% (6/19) per patient. In conclusion, MAF of human oocytes with ICSI is a promising fertilization method for IVF-ET patients, especially with the past history of failure in fertilization or low fertilization rate of oocytes in the previous IVF-ET cycles, and ICSI using micromanipulation procedures applied to human oocytes will provide a range of novel techniques which may dramatically improve the pregnancy rate in IVF-ET program and contribute much to effective management of infertile couples.

• Clinical and Experimental Reproductive Medicine
• /
• v.24 no.1
• /
• pp.119-133
• /
• 1997

In spite of much progress in vitro fertilization and embryo transfer (IVF-ET) program, the pregnancy rate remains at 20-30%, and the endometrial implantation rate per embryo transferred at 10-15%. As a result, about 90% of embryos may fail to implant to the endometrium, and many attempts such as optimization of follicular development, improvement of in vitro culture system including coculture, and micromanipulation of zona pellucida have been made to improve embryonic implantation after IVF-ET. Recently, several procedures of assisted hatching (AH) using micromanipulation have been introduced, and pregnancies and births have been obtained after AH. To develop and establish AH as an effective procedure to improve embryonic implantation, AH with partial zona dissection (PZD) was performed in 116 cycles of 89 infertile couples who had previous repeated failures of standard IVF-ET more than two times (Group I: 71 cycles in 54 patients), or who had implantation failure of embryos with good quality (Group II: 15 cycles in 13), or who had undergone AH without specific indication (Group III: 30 cycles in 22) from January, 1995 to Februry, 1996, and the outcomes of AH were analyzed according to pregnancy rate. The number of oocytes retrieved after controlled ovarian hyperstimulation (COH) was $9.9{\pm}7.1$ in Group I, $11.5{\pm}4.5$ in Group II, and $7.9{\pm}6.4$ in Group III. The number of embryos transferred after AH was $4.7{\pm}1.8$ in Group I, $5.3{\pm}1.3$ in Group II, and $3.5{\pm}2.4$ in Group III. The mean cumulative embryo score (CES) was $56.8{\pm}30.0$ in Group I, $76.1{\pm}35.9$ in Group II, and $38.5{\pm}29.9$ in Group III. The overall clinical pregnancy rate per cycle and per patient was 12.7% (9/71) and 16.7% (9/54) in Group I, 33.3% (5/15) and 38.5% (5/13) in Group II, and 6.7% (2/30) and 9.1% (2/22) in Group III, respectively. There were significant differences in the numbers of oocytes retrieved and embryos transferred, CES, and the clinical pregnancy rate per cycle among three groups. There was a significant inverse correlation between basal serum FSH level and CES, and no pregnancy occurred in patients with CES less than 20. In conclusion, AH of human embryos with PZD prior to ET has improved the implantation and pregnancy rates in IVF-ET patients with the past history of repeated failures, especially in spite of transfer of embryos with good quality, and AH will provide a range of novel techniques which may contribute much to effective management of infertile couples.

• Science of Emotion and Sensibility
• /
• v.13 no.4
• /
• pp.703-710
• /
• 2010

In this study, a tactile stimulator was developed to resolve some problems from the previous version of the system such as system configuration, inappropriate stimulation control and additional problems. The developed tactile stimulator consists of control unit, drive unit and vibrator unit. The control unit was controlled by E-Prime software to generate appropriate vibration pulses. The drive unit supplies enough energy to the vibrator to generate effective stimulation pulses. The vibrator unit consists of small coin type vibrator and velcro, and was made to be attached at the hand easily. The developed tactile stimulator was designed by small-size, light-weight, low-power, simple-fabrication, max 35 channels and little delay time from instruction signal of E-Prime software to vibrator. The duration and magnitude of stimulation was controlled by 10 grades and the problems concerning stimulation control were compensated by wideband frequency ranges. Additionally, the electrical safety was ensured by low voltage operation. Vibrator was made to be attached on finger as well as on any part of the subject. Since this tactile stimulator is developed based on E-Prime software which is widely used in cognitive science, it is believed that this stimulator be suitable for the wide application of cognitive science study.