• Analytical Science and Technology
• /
• v.5 no.1
• /
• pp.91-96
• /
• 1992

A simple and cheap AC voltammeter was manufactured in our lab. This instrument consists of a DC function generator and a lock-in amplifier. We tested this instrument in some chemical systems. Our data, CV voltammogram and AC voltammogram, obtained form using a Pt working electrode in 1M $H_2SO_4$ and a reversible system of $1{\times}10^{-3}M$ ${Fe(CN)_6}^{3-}$ proved our system works well. The quantitative result of iodine is also obtained.

• Journal of Power System Engineering
• /
• v.15 no.2
• /
• pp.55-60
• /
• 2011

The popularity of diesel engines is derived primarily from their higher thermal efficiency resulting from higher compression ratio. NOx removal from the diesel emissions is very important to meet stringent emission regulations. NOx emission from diesel engines is removed by an urea-SCR or an LNT system. The urea-SCR system needs the urea-solution supply system with concentration and level sensor. This study was carried out to develop a sensor for the measurement of urea-solution concentration by an electric conductivity method. Considering experimental parameters were the material of electrode, two kinds of electric power(AC or DC), the distance between two electrodes, and the length of electrode. It was found that the AC electric power was more useful to measure the urea-solution concentration compared to DC, because it prevented an ionization of the urea-solution. The silver rod coated with Pt is the most useful electrode, tendency of which is similar to Pt rod, and the cost is more economic. We could also find out the optimum distance between two electrodes and the length of electrode was 10mm and 3mm, respectively.

• Journal of Hydrogen and New Energy
• /
• v.23 no.2
• /
• pp.125-133
• /
• 2012

Nafion ionomer located in electrode helps to increase the platinum utilization and proton conductivity. To achieve higher performance in PEMFCs, it is important an optimum Nafion content in the electrode. As the platinum loading and fabricated method depend on the optimum Nafion content. In this study, we have examined the interrelationship between platinum loading and Nafion content fabricated by decal transfer method. For electrodes with 0.25 and 0.4 mg/$cm^2$ Pt loading, best performance was obtained at 25 wt.% Nafion ionomer loading. It is also found that MEA with 0.25 mg/$cm^2$ Pt, the optimum Nafion content appears differently at low and high current density.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.262-263
• /
• 2005

Pt counter electrode based on flexible metal for dye-sensitized solar cells(DSCs) has been investigated. Photovoltaic structures on lightweight substrates have several advantages over the heavy glass-based structures in both terrestrial and space applications. Cyclic voltammetry and impedance spectroscopy were used to investigate electrochemical properties of Pt counter electrode both FTO glass and SUS sheet substrate. The DSCs composed of the counter electrode based on a stainless steel substrate has obtained conversion efficiencies comparable to that based on the conducting glass. The counter electrode based on the stainless steel substrate has the merit of improving the fill factor and conversion efficiency of the DSCs by reducing its internal resistance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.10
• /
• pp.1048-1053
• /
• 2002

In this paper, thin film bulk acoustic resonator(TFBAR) lattice and balanced type filter topologies are designed and fabricated. Aluminium nitride and platinum are used for piezoelectric material and top and bottom electrodes, respectively. Air-gap is placed to avoid silicon substrate loading effect and the performance of these lattice and balanced filters is compared with ladder filters. These filters have selectivity over 15 dB for lattice type and 30 dB for balanced type and reveal wider bandwidth of the ladder filters. For balanced type filters, minor tuning procedure is not needed and they are readily available for RF filter in wireless applications.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.66-68
• /
• 1994

강유전체 박막과 마이크로 가공기술을 이용하여 초전형 적외선 센서를 제작하였다. 초전형 적외선 센서는 $Pb_{1-x}La_xTi_{1-x/4}O_3$ (x=0.05) (PLT) 강유전체 박막 커패시터를 RF 마그네트론 스퍼터링 방식으로 백금 전극이 증착된 MgO 기판상에 결정 성장시킨 구조를 갖고 있다. 스퍼터링된 PLT 바닥은 높은 c-축 결정 구조를 가지므로 센서로 사용하기 위한 poling 처리 과정이 필요하다. 이는 적외선 이미지 센서를 구현함에 있어서 수율 향상에 필수적인 요소이다. 마이크로 가공 기술을 사용하여 센서의 열용량을 극소화 함으로서 센서의 효율을 최대화하였다. 제작된 센서의 상부에 폴리이미드를 코팅하고 MgO 기판을 선택적으로 식각하여 코팅된 폴리이미드가 강유전체 박막 커패시터를 지지하고 있는 구조를 구현하였다. 이렇게 제작된 센서의 감도는 상온에서 $8.5{\times}10^8cm{\cdot}{\sqrt}{Hz/W}$로 측정되었으며 이는 마이크로 가공 기술을 사공하지 않은 경우보다 약 100 때의 감도 향상을 가져왔다.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.4
• /
• pp.218-224
• /
• 2004

We present a miniature Direct Methanol Fuel Cell (micro-DMFC) using platinum sputtered microcolumn electrodes with a limited amount of fuel. We use the microcolumn electrode in order to improve the power density of the micro-DMFC that consists of two electrodes and polymer electrolyte. We also design the built-in fuel chamber in the anode for the portable electronics applications. We design and fabricate both microcolumn and planar electrodes, having an identical projective area of 5mm${\times}$5mm. The diffusion current density of the microcolumn electrode is 1.73 times higher than that of the planar electrode at electrode potential of 1.1V in the half-cell test. The micro-DMFC based on the microcolumn electrodes shows the maximum power of 10.8$\pm$7.54㎼(43.23$\pm$0.16㎼/$\textrm{cm}^2$) at the projective area of 5mm${\times}$5mm, while the planar electrode micro-DMFC shows the maximum power of 0.81$\pm$0.42㎼(3.24$\pm$1.68㎼/$\textrm{cm}^2$) at the same projective area. The micro-DMFC based on the microcolumn electrodes shows 13 times higher power density that the micro-DMFC based on the planar electrodes does.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1384-1385
• /
• 2006

Platinum is a candidate of top and bottom electrode in ferroelectric random access memory and dynamic random access memory. High dielectric materials and ferroelectric materials were generally patterned by plasma etching, however, the low etch rate and low etching profile were repoted. We proposed the damascene process of high dielectric materials and ferroelectric materials for patterning process through the chemical mechanical polishing process. At this time, platinum as a top electrode was used for the stopper for the end-point detection as Igarashi model. Therefore, the control of removal rate in platinum chemical mechanical polishing process was required. In this study, an addition of $H_{2}O_{2}$ oxidizer to alumina slurry could control the removal rate of platinum. The removal rate of platinum rapidly increased with an addition of 10wt% $H_{2}O_{2}$ oxidizer from 24.81nm/min to 113.59nm/min. Within-wafer non-uniformity of platinum after chemical mechanical polishing process was 9.93% with an addition of 5wt% $H_{2}O_{2}$ oxidizer.

• Applied Chemistry for Engineering
• /
• v.33 no.4
• /
• pp.436-439
• /
• 2022

𝛽-Hydroxynitrile and 𝛽-ketonitrile were synthesized by the electrochemical oxidation of benzyl alcohol in an acetonitrile solvent. 𝛽-Hydroxynitrile was prepared by the reaction between benzaldehyde from the oxidation of benzyl alcohol and acetonitrile anion which was produced from the electrochemical reduction of acetonitrile. 𝛽-Hydroxynitrile was finally electrochemically converted into 𝛽-ketonitrile by applying 20 mA of current for 3 h. We demonstrated that 𝛽-hydroxynitrile or 𝛽-ketonitrile syntheses were prepared by electrochemical oxidation of benzyl alcohol with a commonly used Pt electrode at room temperature.

• Journal of Korean Society of Water and Wastewater
• /
• v.33 no.1
• /
• pp.31-41
• /
• 2019

Volatile organic compounds(VOCs) are toxic carcinogenic compounds found in wastewater. VOCs require rapid removal because they are easily volatilized during wastewater treatment. Electrochemical advanced oxidation processes(EAOPs) are considered efficient for VOC removal, based on their fast and versatile anodic electrochemical oxidation of pollutants. Many studies have reported the efficiency of removal of various types of pollutants using different anodes, but few studies have examined volatilization of VOCs during EAOPs. This study examined the removal efficiency for VOCs (chloroform, benzene, trichloroethylene and toluene) by oxidization and volatilization under a static stirred, aerated condition and an EAOP to compare the volatility of each compound. The removal efficiency of the optimum anode was determined by comparing the smallest volatilization ratio and the largest oxidization ratio for four different dimensionally stable anodes(DSA): Pt/Ti, $IrO_2/Ti$, $IrO_2/Ti$, and $IrO_2-Ru-Pd/Ti$. EAOP was operated under same current density ($25mA/cm^2$) and electrolyte concentration (0.05 M, as NaCl). The high volatility of the VOCs resulted in removal of more than 90% within 30 min under aerated conditions. For EAOP, the $IrO_2-Ru/Ti$ anode exhibited the highest VOC removal efficiency, at over 98% in 1 h, and the lowest VOC volatilization (less than 5%). Chloroform was the most recalcitrant VOC due to its high volatility and chemical stability, but it was oxidized 99.2% by $IrO_2-Ru/Ti$, 90.2% by $IrO_2-Ru-Pd/Ti$, 78% by $IrO_2/Ti$, and 75.4% by Pt/Ti anodes The oxidation and volatilization ratios of the VOCs indicate that the $IrO_2-Ru/Ti$ anode has superior electrochemical properties for VOC treatment due to its rapid oxidation process and its prevention of bubbling and volatilization of VOCs.