• Journal of the Korean Applied Science and Technology
• /
• v.22 no.3
• /
• pp.228-233
• /
• 2005

Langmuir-Blodgett(LB) technique can speak the best candidate of the future molecular electronic devices. But, precursor as molecular ultrathin film devices require the bulk property that are influenced by the molecular orientation. So, this device is one of current interest in molecular electronic device development of new materials. In this study, quantitative evaluation of molecular orientation in LB films of polyamic acid alkylamine salt was performed analysis experiment comparing the absorption or transmission intensity of the FT-IR spectrometer and reflection or absorption spectra with UV-visible absorption spectra. It could find that the polar angle(${\theta}$) of the dipole moment appears in about $68^{\circ}$ and the tilting angle of the alkyl chain is about $11.5^{\circ}$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.11a
• /
• pp.269-272
• /
• 1995

As methane concentration was varietal, the textures of diamond films deposited on Si(100)substrate could be observed by XRD, SEM and Raman spectroscope. As a result, O$_2$plasma etching has been useful to observe microscopic structure of diamond films by SEM. The cross section of diamond films deposited on Si(100) substrate with 4% concentration of methane to hydrogen was a polycrystal like a pillar. The diamond crystal like a pillar has been oriented to (110) surface and the high quality diamond with FWHM of Raman spectra being 3.8cm$\^$-1/ has been grown. As time goes by deposition time, the preferred orientation increases.

• Electrical & Electronic Materials
• /
• v.9 no.3
• /
• pp.270-276
• /
• 1996

As methane concentration was varied, the textures of diamond films deposited on Si(100)substrate were observed by XRD,SEM and Raman spectroscope. As a result, $O_{2}$ plasma etching has been useful to observe microscopic structure of diamond films by SEM. The cross section of diamond films deposited on Si(100)substrate with 4% concentration of methane to hydrogen was a polycrystal like a pillar. The diamond crystal like a pillar has been oriented to (110)surface and the high quality diamond film with FWHM of Raman spectra being 3.8 $cm^{-1}$ / has been grown. As time goes by deposition time, the preferred orientation increases

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1475-1477
• /
• 2001

In odor to set high saturation magnetization and coercivity, it had need to orient axis of easy magnetization of CoCr-based thin film perpendicular direction(c-axis) to the substrate plane. It was known that crystalline orientation of CoCr-based thin film was improved by introducing underlayer like Ti, Ge. We prepared singlelayer and double layer with Si underlayer by Facing Targets Sputtering System. As a result, intensity and c-axis dispersion angle ${\Delta}{\theta}_{50}$ of singlelayer were improved with increasing film thickness. Also, it was found that CoCr/Si and CoCrTa/Si double layer showed good c-axis dispersion angle due to introducing Si.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.164-164
• /
• 2008

금속배선공정에서 높은 전도율과 재료의 값이 싸다는 이유로 최근 Cu를 사용하였으나, 디바이스의 구조적 특성을 유지하기 위해 높은 압력으로 인한 새로운 다공성 막(low-k)의 파괴와, 디싱과 에로젼 현상으로 인한 문제점이 발생하게 되었다. 이러한 문제점을 해결하고자, 본 논문에서는 Cu 표면에 Passivation layer를 형성 및 제거하는 개념으로 공정시 연마제를 사용하지 않으며, 낮은 압력조건에서 공정을 수행하기 위해, 전해질의 농도 변화에 따른 Liner sweep voltammetry 법을 사용하여 전압활성화에 의한 전기화학적 반응이 Cu전극에 어떤 영향을 미치는지 연구하였으며, 표면 조성을 알아보기 위하여 Energy Dispersive Spectroscopy (EDS) 분석을 하였고, Cu disk의 결정성과 배향성 관찰을 위해 X-Ray diffraction (XRD)로 금속 표면을 비교하여 실험 결과로 얻어진 데이터를 통하여 ECMP 공정에 적합한 전해액 선정과 농도를 선택하였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.9
• /
• pp.677-681
• /
• 2013

Apart from the deposition of alignment layer, alignment process needs to be involved for alignment of liquid crystal (LC) molecules. To simplify manufacturing process, several method were used such as rubbing, ion-beam irradiation, UV irradiation, and lithography. But, eventually it needs another treatment for LC alignment. Here, we suggested Si induced polyimide (PI) alignment layer at low temperature. Using this method, we are able to eliminate the alignment process and found that the alignment and electro-optic performance are much better than that of the rubbed PI LC cells. Compared to the rubbed PI cells, the response time was decreased by 70% and C-V characteristics have hysteresis-free.

• The Korean Journal of Rheology
• /
• v.4 no.1
• /
• pp.62-69
• /
• 1992

한정된 공간 속을 희석 고분자 용액이 흐를 때 그공간의 특성 길이가 고분자의 그 것과 비슷한 경우에는 실험적으로 무한 공간에비하여 점도가 작게 됨을 보였다, 잔탄 검 용 액과 폴리아크릴 아미드 용액이 원통형 다공을 가진 고분자 막을 통해 흐를때의 점도를 뉴 톤 영역뿐 아니라 비뉴톤 영역에서도 한꺼번에 측정할 수 있는 흐름장치를 만들어 실험하였 다, 뉴톤 점도는 다공의 크기가 줄어들수록 줄어드는 경향을 보였는데 이는 두 특성 길이의 비로서 설명할수 있었다, 비뉴톤 점도 영역에서의 지표(power law index)는 폴리아크릴 아 미드 용액에서는 차이가 발견되지 않았으나 잔탄 검용액에서는 다공의 크기가 감소할수록 점점 작은 값을 보였다, 이것은 두 고분자 사슬의 경직성 차이에 기인된다 하겠다. 결론적으 로 벽 근처에 분차 크기 정도의 고분자 희박 영역이 존재하고 그 영역내에서는 고분자 사슬 의 배향 구조가 제한적이다고 하는 이론적 설명과 부합되는 결과를 얻었다.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1600-1602
• /
• 1996

We have investigated the anisotropic dispersion force effects for surfaces alignment of liquid crystals (LCs) on rubbed polystyrene (PS) surfaces by unidirection. In microphotographs an of the textures, we obtained the nematic (N) LCs are shown to align in both direction parallel and perpendicular to the rubbing for region up to medium rubbing, however to align in the direction perpendicular to the rubbing for strong rubbing region. We suggest that the anisotropic dispersion force is very important rather than macro-surface groove effect to uniform alignment of LCs. We also measured the temperature dependence of extrapolation length of 5CB on rubbed PS surfaces for strong rubbing. It is shown that the polar anchoring strength of 5CB is very weak on rubbed PS surface compared to the rubbed polyimide (PI) surface.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.05a
• /
• pp.105-108
• /
• 1996

We have studied the anisotropic dispersion force effects for surfaces alignment of liquid crystals (LCs) on rubbed polystyrene (PS) surfaces by unidirection. In microphotographs of the textures, we obtained the nematic (N) LCs are shown to align in both direction parallel and Perpendicular to the rubbing for region up to medium rubbing, however to align in the direction perpendicular to the rubbing for strong rubbing legion. We suggest that the anisotropic dispersion force is very important rather than macro-surface groove effect to uniform alignment of LCs. We also measured the temperature dependence of extrapolation length of 5CB on rubbed PS surfaces for strong rubbing. It is shown that the polar anchoring strength of 5CB is very weak on rubbed PS surface compared to the rubbed polyimide (Pl) surface.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.271-272
• /
• 2005

We studied liquid crystal (LC) alignment with ion beam (IB) on polyimide and electro-optical characteristics of twisted nematic (TN)-liquid crystal display (LCD) on the polyimide surface using obliquely ion beam exposure. A good uniform alignment of the nematic liquid crystal (NLC) alignment with the ion beam exposure on the polyimide surface was observed. In addition, it can be achieved the good EO properties, and residual DC property of the ion-beam-aligned TN-LCD on polyimide surface.