• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.8 s.197
• /
• pp.130-137
• /
• 2007

The optimized prosthetic mass distribution was a controversial problem in the previous studies because they are not supported by empirical evidence. The purpose of the present study was to evaluate the effect of prosthetic mass properties by modeling musculoskeletal system, based on the gait analysis data from two above-knee amputees. The joint torque at hip joint was calculated using inverse dynamic analysis as the mass was changed in knee and foot prosthetic components with the same joint kinematics. The results showed that the peak flexion and abduction torque at the hip joint were 5 Nm and 15 Nm when the mass of the knee component was increased, greater than the peak flexion and abduction torque of the control group at the hip joint, respectively. On the other hand, when the mass of the foot component was increased, the peak flexion and abduction torque at the hip joint were 20 Nm and 15 Nm, greater than the peak flexion and abduction torque of the control, respectively. The hip flexion torque was 4.71-fold greater and 7.92-fold greater than the hip abduction torque for the knee mass increase and the foot mass increase on the average, respectively. Therefore, we could conclude that the effect of foot mass increase was more sensitive than that of knee mass increase for the hip flexion torque. On the contrary, the mass properties of the knee and foot components were not sensitive for the hip abduction torque. In addition, optimized prosthetic mass and appropriate mass distributions were needed to promote efficiency of rehabilitation therapy with consideration of musculoskeletal systems of amputees.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.6
• /
• pp.651-656
• /
• 2011

Although prosthetic training was received, most of amputees mainly depend on visual feedback to use prostheses, not on cutaneous and proprioceptive sensibility. Our objective of this study was to determine if there are changes in the somatosensory sensibility of amputees compared to non-amputees using multi-channel vibration stimulation system. One transradial amputees and ten non-amputees were involved. To investigate changes of residual somatosensory sensibility at stump, we set up custom-made vibration stimulation system including eight actuators (4 medial and 4 lateral) and GUI-based acquisition system. The results showed that there was similar pattern of subjective response at most of channels among group as stimulation increases. However, amputees' subjective response at channel 8 for 238Hz vibration was more sensitive than that of healthy persons. With respect to channels, response at channel 4 (medial) corresponding region to flexor carpi ulnaris for transradial amputees was most sensitive than other channels. In addition, sensitivity of four medial channels was on average about 0.5 scale than that of four lateral channels. Somatosensory sensibility was amputee, women, and men in sensibility order.

• The Korean Journal of Food And Nutrition
• /
• v.13 no.6
• /
• pp.521-528
• /
• 2000

Conditions for processing dried condiments with powdered sea tangle were investigated. The most appropriate method for sea tangle extraction was two-stage extraction, that extracted with addition of 70% ethyl alcohol at $25^{\circ}C$ for 1 hour and residue was re-extracted with water(1:15, w/w) at 7$0^{\circ}C$ for 3 hours. The yield of soluble solids under above-mentioned conditions was 14.9%. As a result of omission tests, free amino acids were predominated in the taste compounds of sea tangle extracts rather than nucleotides, and the contribution of free amino acids and nucleotides to the taste of sea tangle extracts was remarkable. The major flavoring components of sea tangle extracts were matters of low molecular weight such as free amino acids and oligopeptides below 5,700 dalton. Contents of carbohydrate, total nitrogen and amino nitrogen in dried condiments prepared with sea tangle extracts were 64.9%, 3.7% and 2.1%, respectively. And drying yield, solubility and absorption rates at Aw 0.88 were 14.7%, 98.3% and 8.4%, respectively.

• Korean journal of communication and information
• /
• v.84
• /
• pp.28-98
• /
• 2017

This work critically deals with the much unstable and fragmented states of young adults in contemporary Korean society. Nowadays, most of young adults in Korea have encountered much severe, uncertain, and 'hellish' socio-economic situations while their dreams of getting regular jobs are hard to achieve. This study aims to present a nuanced and detailed analysis of their sedimented feelings, variegated emotions, as well as embodied positions by utilizing in-depth interviews and critical explorations on their particular modes of survival.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.238-238
• /
• 2011

Ion sensitive field effect transistor (ISFET)는 용액의 이온 농도를 측정하는 반도체 센서로, 1970년 Bergveld에 의해 처음으로 제안되었다. ISFET가 제안된 이래로, 제조공정이 간단하고 감지막의 감지 특성 평가가 용이한 electrolyte-insulator-semiconductor (EIS) pH센서 또한 지속적으로 연구되었다. EIS pH센서는 작은 소자 크기, 견고한 구조, 빠른 응답속도와 CMOS공정과의 호환성이 좋다는 장점이 있다. EIS 또는 ISFET 센서를 이용하여 생물학적 요소의 신호 감지 특성을 평가함에 있어 소자의 signal to noise 비율이 우수해야 한다. EIS pH센서의 높은 signal to noise 비율을 얻기 위해, 소자의 표면적을 증가시키거나 감지막으로 유전상수가 높은 물질을 사용하여 출력 특성을 향상시켜야 한다. 본 연구에서는 trench구조와 SiO2/HfO2/Al2O3 (OHA) 적층 감지막을 갖는 EIS pH센서를 제작하여 출력 특성을 증가시키는 실험을 실시하였다. 120 nm, 380 nm, 780 nm의 다양한 깊이를 가진 trench를 형성하였으며, trench 깊이에 따른 출력특성을 비교하였다. 또한, 제작된 EIS 소자의 pH감지 특성을 분석하였다. 제작된 EIS소자의 감지막 중 SiO2는 Si와 high-k물질의 계면 상태를 보완하기 위한 완충막으로 성장되었고, HfO2는 높은 유전상수를 가지고 있어 signal to noise 비율을 향상시키는 물질로 증착되었다. 최종적으로 Al2O3는 pH용액과의 화학적 손상을 막기 위한 물질로 증착되었다. 실험 결과, trench 깊이가 깊어질수록 출력값이 증가하였고 이는 signal to noise 비율이 향상되는 것을 의미한다. 결론적으로 trench 형성을 통한 표면적 증가와 high-k물질을 적층한 감지막으로 인해 높은 출력 특성을 갖는 우수한 EIS 바이오센서를 제작할 수 있었다.

• Economic and Environmental Geology
• /
• v.51 no.3
• /
• pp.291-307
• /
• 2018

Australia is the world's top gold, nickel, iron ore, lead, zinc and uranium, and is ranked in the top five in many other important minerals. Extension to existing resources will continue to support well-established local production. There are perceptions by some that Australia is a mature exploration destination where the easily won near-surface deposits were largely discovered many decades ago. In recent years, Australia faces increasing global competition for investment spending in all jurisdictions in which mineral exploration is encouraged. Many regional communities face the threat of losing their main economic driver as a number of long-term mines are reaching the end of their economic life. However, given the trend of increasing mineral demand due to the 4th industrial revolution, it is considered that Korea is also an opportunity to acquire global competitiveness of geoscience and mining technology by smart and digital mining, and by ICT-convergence technology R&D.

• Economic and Environmental Geology
• /
• v.36 no.6
• /
• pp.407-413
• /
• 2003

The geology of the Apdong Nb-Ta deposit, is hosted by alkali metasomatites, consist of Upper Proterozoic sedimentary rocks, alkali syenites(Hoamsan intrusive) of Phyonggang Complex(late Paleozoic to early Mesozoic), Jurassic granite and Quaternary basalt. Alkali syenites are distinguished as alkali amphibole-pyroxene syenite, alkali amphibole-biotite syenite, biotite-nepheline syenite, biotite syenite, and quartz-alkali amphibole-pyroxene syenite. Alkali metasomatites are the products of intense post-magnatic metasomatism, and form the Nb-Ta ore bodies as the belt, irregular vein and lenticular types in the southern part of Hoamsan intrusive. The ore mineralization is characterized by the occurrence of pyrochlore, zircon, and small amounts of columbite, fergusonite. magnetite, fluorite, molybdenite, ilmenite, titanite, apatite, and monazite. Pyrochlore is one of the niobium/tantalum oxides and contains substantial amounts of rare earths and radioactive elements. The compositional varieties of pyrochlore can be defined: (1) enriched in tantalum, uranium and cerium, (2) substantially tantalum- and fluorine-poor, and (3) enriched in thorium or barium. The geochemical characteristics, ore textures and mineral occurrences indicate that alkali metasomatism of the mineralizing fluid was the dominant ore-forming process.

• Journal of the Mineralogical Society of Korea
• /
• v.1 no.2
• /
• pp.117-130
• /
• 1988

The morphology of the Ca-montmorillonites from the Gampo area was investigated by the use of scanning and transmission electron microscope. These bulk samples show an irregular or rugged surface with well developed cavities and relict outline of original ash material at low magnification by SEM, indicating that montmorillonites are derived from volcanogenic material. Two different types of morphology of montmorillonites by SEM were observed which appear to depend very much on the space available for crystal growth. One is honeycomb structure montmorillonite growing in an open space. The other is the closely packed aggregates of intergrown montmorillonite showing platy particles where available space for the growth is limited. Several different habits of montmorillonite within a single sample can be observed by TEM. The dominant habit observed is the irregularly shaped and foliated aggregates and the platy shaped particles. In general, platy shaped particles are relatively abundant in the samples from Yongdongri compared with those from Jugjeonri area.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.3
• /
• pp.207-213
• /
• 2007

For several years, although the demand of high accuracy kinematic positing using multiple bases has been increased, most of the commercial GPS processing softwares can provide the single-baseline solutions only. Thus, we studied the methods to improve the accuracy of the kinematic positioning using the network configuration based on the several single-baseline solutions. As discussed in this study, the positioning accuracy as well as the network stability is improved by introducing the geodetic network adjustment theories into the kinematic positioning application. Three different methods to remove the rank-deficiency, RLESS, BLIMPBE and SCLESS, are analyzed in this study. The 3D RMS error has been improved from 3.5cm(max) to 2.1cm using the network-based kinematic positioning, and it is desired to choose BLIMPBE and SCLESS depending on the accuracy of the base stations.

• Journal of Life Science
• /
• v.13 no.3
• /
• pp.365-373
• /
• 2003

Instead of deodorization appararus of fish oil, an adsorbent such as activated charcoal, activated alumina, silicagel, bamboo charcoal was packed in column alone or mixed with preparative ratio, and then test the effective deodorization with bleaching. In the progress of degumming, the effective method was 18 ml of 2.5% oxalic acid per 100m1 of crude large anchovy oil. The optical condition to deacidified was treating for 30 min at $40^{\circ}C$ with 2.5% sodium hydroride solution. The effective deodorization was added with 3% silicagel under the alone treating adsorbent, and mixed treating was 30% activated alumina and 10% silicagel but added to green tea powder was not effective. The major fatty acid of total lipid were 16:0, 20:5n-3, 18:1n-9, 16:1n-7 and 22:6n-3 after treatment of degumming, deacidfication and deodorizing in the large anchovy oil. The oxidative stability of refined anchovy oil added to $\alpha$-tocopherol was validated 20 days under the control, and 30 days in the case of $\alpha$-tocopherol. The 0.01% $\alpha$-tocopherol was more effective than 0.02% $\alpha$-tocopherol.