• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.213-215
• /
• 2011

국내외에서 플로팅 건축물에 대한 관심의 증대와 함께 수요가 현실화되고 있는 반면, 플로팅 건축물 계획에서 기본적으로 요구되는 배치와 형태계획 등에 관련된 직접적인 지침은 없다. 이 연구에서는 기존 국내외 관련 지침을 조사하여 배치 및 형태계획과 관련된 지침 구성요소를 도출하고 이를 비교 분석하여 배치 및 형태계획 지침을 작성하기 위한 지침 구성 체계를 제안하였다.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.29 no.6
• /
• pp.29-36
• /
• 2000

한국 전통마을의 환경생태적 해석을 통해서 도출된 환경 친화적 주거단지의 계획지침들 중 배치계획에 적용될 수 있는 사항들을 소개한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.338-339
• /
• 2011

본 연구는 해양플랜트 지원선 중 작업자들에게 전용거주시설을 제공하는 생활바지선 거주구공간계획에 관한 연구이다. 생활바지선의 거주구는 '작업자영역', '서비스영역', '승무원영역', '업무영역'으로 공간을 분류할 수 있다. 본 연구에서는 현재 사용되고 있는 10척의 생활바지선 일반배치도(GA)를 조사하여 거주공간특성을 분석하였다. 또한 해양플랜트 거주구 설계시 가장 많이 참조되는 ABS, NORSOK 등 해외선급협회에서 제시하는 해양플랜트 거주구 공간설계지침을 분석하여 생활바지선에서 거주구 공간계획에 적용하기위한 설계지침을 제시하였다. 그리고 생활바지선 거주구 설계모델을 설정하고 모델을 대상으로 데크별 공간배치와 동선을 계획하였다. 마지막으로 거주구 설계모델의 객실, 식당, 주방, 휴게공간 그리고 위생시설 등 주요공간을 대상으로 공간계획을 실시하고 계획안을 제시하였다. 최근 국내 조선업계에서도 생활바지선에 대한 관심이 증가하고 있으나 거주구 공간설계기술의 부족으로 외국 설계업체에 의존하고 있는 형편이다. 따라서 우선 한국선급협회에서 본 연구결과를 기초 생활바지선 거주구 공간계획을 위한 설계지침을 시급히 만들어야만 한다.

• Journal of Navigation and Port Research
• /
• v.36 no.3
• /
• pp.189-196
• /
• 2012

Recently constructed several floating buildings, in Korea, provoked the discussion about the activation of floating architecture. But, there is no guideline for the planning of floating architecture in Korea. This study aims to propose the framework of planning guidelines for the superstructure of floating architecture. For the purpose, collected various exiting guidelines related to floating architecture, and then analysed the structure and components of those guidelines. As a result of analysis, many components, could be used as references, are extracted. After the classification of the components into several categories, then, compared the content of components, derived from different guidelines, in same category. Based on the former analysis and comparison, proposed the framework of planning guidelines for the superstructure of floating architecture, consist of various set of components.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1259-1266
• /
• 2022

Stowage planning is an essential process for safe loading by establishing, agreeing on, and systematically implementing a reasonable loading and securing method based on information on cargo, loading/unloading and the ship. In addition, depending on the plan, there may be a difference of about 14% or more in the loading amount per ship, which causes a tolerance rate and leads to an increase in sea freight charges. In this study, work environment and process standards for steel coil shipment, and classification regulations and guidelines related to steel coil shipment were analyzed. In addition, we developed a steel coil loading and placement automation system that derives an optimal loading plan through performance data-based shipping balancing and stability analysis.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.5
• /
• pp.21-32
• /
• 2011

The district units planning suggests not only detailed standards of building as parts of the whole plan in the district but also a guideline of the arrangement, shape and pavement of the public open space, in order to move away from the rigid image of an institution which causes the formal creation of it. This triggered various problems. While the basic plan for adjustment of urban environments(established in 2005) was being reorganized in order to reflect changed conditions of the city center, the sector of public open space was subdivided according to the guidelines of development by district. We conducted a comparative analysis of conditions before and after the adjustment, so as to examine whether or not the reorganized institution is effective for the plan of public open spaces. The analysis showed that there was no remarkable change between the basic plan and the reorganized institution in that items which were not any different from the existing building codes were established due to lack of guidelines related to public open space under the law of urban and residential environmental improvement. Low regulations should set up criteria for establishment from a concrete, effective microscopic aspect appropriate to the significance of public open space by the linking of public open space and the surrounding environment, whereas high regulations such as building codes should specify essential components.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.15 no.25
• /
• pp.15-22
• /
• 1992

본 연구에서는 물류의 개선 및 생산율 향상을 통하여 전 생산시스템의 생산성을 향상시키기 위한 효율적인 제조셀의 설계 및 운용시에 고려하여야 할 요소를 고찰하였다. 효율적인 제조셀을 형성하는데 발생하는 문제점(부품/기계군 형성, 설비배치, 스태핑, 셀 일정계획 및 운용)을 해결하기 위하여 필요한 요소별 지침을 제시하였다. 그러나, 셀생산의 장점을 충분히 얻기 위해서는 이들 요소들은 종합적으로 고려하여야 한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.1
• /
• pp.239-246
• /
• 2019

The drone photogrammetry is actively utilized for obtaining highly accurate spatial information and other various monitoring purposes. It is general to plan the drone photogrammetry by referring to previous experiences or cases in order to obtain the required accuracy, but the drone photogrammetry is often carried out again due to poor accuracy. Since the required spatial accuracy of the drone photogrammetry process result becomes the means of objective evaluation regardless of the type of result, it should be determined carefully. Therefore, it is necessary to determine flight height, overlap, number and arrangement of ground control point, and exterior orientation factor acquisition method in order to meet the required 3D positional accuracy for the design of drone photogrammetry project. In this study, previous study cases for the analysis of drone photogrammetry accuracy were carefully analyzed and verified by applying such cases to testing area, and design guideline of drone photogrammetry project for a small area was prepared based on the analysis result. The presented project design guideline is expected to be a great help to business practice although it is not perfect, and if the design guideline is prepared through comprehensive analysis in future, it would be possible to provide a perfect manual.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5D
• /
• pp.723-734
• /
• 2008

In this paper, the problems and betterment plan in operating district units plan are studied by selecting typal case locations based on the types of district units plan of the city of Busan. According to the types, 4 locations of 'type of maintaining preexisting district' and 3 of 'type of managing preexisting district' are selected as case locations, based on a scale and characteristics of each location.In systematical aspects of the case locations, indiscreet upward adjustment of the locations, insignificant participation of the citizens and patternization were recognized as problems. And setting accurate standards for target and range of alteration in line with usage plan of the locations would be necessarily urgent. So through the analysing process of the problems arisen from the case locations I would suggests necessary solutions to improve the effectiveness of the district units plan. And In planning aspects, the similarity between the basic directions and the object, batch-application of the density plan, inadequacy of the usage plan, allocations and patterns of structures, and color planning were recognized to have problematic points. Consequently distinguished specific operating-guidelines would be necessary to achieve the basic directions and the object of district units plan. Furthermore, the building-to-land ratio and floor space index are needed to be exactly calculated through providing accurate and logical standards for appropriate development density of structures.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.209-216
• /
• 2004

In A bridge which connects Mokpo North Harbor and Com Island is going to be constructed until 2009. For the bridges being built in the navigable water area, it is indispensible to carry out vessel traffic safety assessment from the viewpoint of shiphandlers, however, there exist no specific guidelines for the necessary conditions whim the bridge designers can rely on. In this paper, traffic safety assessment procedures for the layout of the bridge is briefly introduced, and the conditions whim should be taken into account at the initial design stage of the bridge is surveyed. For the safety assessment of the bridge design, ship navigation simulations, such as RTS(real time simulation} and FTS(fast time simulation), are carried out, the results of which are statistically analysed to estimate the probability of collision between the ship and the pier of the bridge.