• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.4
• /
• pp.301-306
• /
• 2016

During the initial stage of propulsion shaft design, the shaft alignment process includes a thorough consideration of lateral vibration to verify the operational safety of the shaft. However, a theoretical method for analyzing forced lateral vibrations has not been clearly established. The methods currently used in classification societies and international standards can only ensure a sufficient margin to avoid the blade-passing frequency resonance speed outside the range of ${\pm}20%$ of the maximum continuous rating (MCR) for the engine. Typically, in shaft alignment analyses, longer center distances between the support bearings promote affirmative results, but the blade order resonance speed can approach the lower limit for lateral vibration. Therefore, this matter requires careful attention by engineers, and a verification of the theoretical analysis by experimental measurements is highly desirable. In this study, both theoretical and experimental analyses were conducted using strain gauges under two draught conditions of vessels used as 50,000-DWT oil/chemical tankers, introduced recently as eco-friendly ships. Based on the analyses, the influence of the lateral vibration on the shafting system and the system's reliability was reviewed.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.5
• /
• pp.422-429
• /
• 2013

It is of great importance to localize leakages in complex pipelines for assuring their safety. A sensor array that can detect where leakages occur enables us to monitor a wide area with a relatively low cost. Beamforming is a fast and efficient algorithm to estimate where sources are, but it is generally made use of in free field condition. In practice, however, many pipelines are placed in a closed space for the purpose of safety and maintenance. This leads us to take reflected waves into account to the beamforming for interior leakage localization. Beam power distribution of reflected waves in a closed space is formulated, and spatial average is introduced to suppress the effect of reflected waves. Computer simulations and experiments ensure how the proposed method is effective to localize leakage in a closed space for structural health monitoring.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.12
• /
• pp.107-119
• /
• 1999

There is no authentic solution in a face detection problem though it is an important part of pattern recognition and has many diverse application fields. The reason is that there are many unpredictable deformations due to facial expressions, view point, rotation, scale, gender, age, etc. To overcome these problems, we propose an algorithm based on feature-based method, which is well known to be robust to these deformations. We detect a face by calculating a similarity between the formation of real face feature and candidate feature formation which consists of eyebrow, eye, nose, and mouth. In this paper, we use a steerable filter instead of general derivative edge detector in order to get more accurate feature components. We applied deformable template to verify the detected face, which overcome the weak point of feature-based method. Considering the low detection rate because of face detection method using whole input images, we design an adaptive skin-color filter which can be applicable to a diverse skin color, minimizing target area and processing time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.9A
• /
• pp.758-766
• /
• 2011

Cooperative communications are adopted as a promising solution to achieve high data rate over large areas in the future 40 wireless system and the relay station (RS) is the key concept in cooperative communications. However, most existing works in this area focus only on optimal RS selections. In addition, there are only few works consider another crucial issue: how many relay stations we need to place. Only when the number of relay stations is defined, the relay station selection can be performed well. In this paper we derive a formula which describes the impact of varying number of RS on end-to-end link throughput assuming a clustering scheme which is based on Voronoi tessellation. In addition to mathematical analysis on the feasibility of the formula, we also examine its performance through a set of simulations under the Erceg path loss model. Simulation results verify that the link throughput gain of our proposed scheme is promising.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.2
• /
• pp.55-64
• /
• 1990

This paper concerned about a study on the direct pole placement PID self-tuning controller design for DC servo motor control system. The method of a direct pole placement self-tuning PID control for a DC servo motor of Robot manipulator tracks a reference velocity in spite of the parameters uncertainties in nonminimum phase system. In this scheme, the parameters of classical controller are estimated by the recursive least square (RLS)identification algorithm, the pole placement method and diophantine equation. A series of simulation in which minimum phase system and nonminimum phase system are subjected to a pattern of system parameter changes is presented to show some of the features of the proposed control algorithm. The proposed control algorithm which shown are effective for the practical application, and experiments of DC servo motor speed control for Robot manipulator by a microcomputer IBM-PC/AT are performed and the results are well suited.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.6
• /
• pp.1275-1280
• /
• 2009

In recent bridge design, studies on application of external prestress have actively been conducted. When prestress is applied to steel structures, the limit value of elastic strain with large load increases with reduction of steels, this method is economic in cost. According to study by Brodka (1969), steel plate bridges with prestress has an effect on cost saving of about 15% compared with structures without prestress. For that reason, our country recently adopted this method in construction of temporary bridges and various engineering technologies have been developed which made stress correction, droop correction and long-span construction possible with relatively small cross sections. This study verifies the method of application of prestress in temporary steel structures, the influence of high-strength tendon arrangement and the effects of composite structures of steel plates and high-strength tendons based on existing method.

• Journal of Korea Water Resources Association
• /
• v.38 no.7 s.156
• /
• pp.585-593
• /
• 2005

Recent concerns regarding protecting, identifying, isolating, redundant routing and dewatering of subsystems of water distribution networks have led to the realization of the importance of valves in these systems. Valves serve two purposes namely, flow and pressure control and isolating subsystems due to breakage or contaminant containment. In this paper, valves are considered from the point of view of subsystem isolation. When a water main is required to be closed, it may be in general necessary to close several other pipes in addition to the broken pipe itself depending on the distribution of adjacent valves. This set of pipes is defined as a segment. In this paper a segment analysis for isolating pipes is present and based on the segment analysis, we suggested the Valve Importance Index and the 7 performance indicators to evaluate the system performance. The suggested methodology is applied to a real network to verify the applicability of the methodology.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.9 no.2
• /
• pp.97-104
• /
• 1997

A hyperbolic numerical model with multi-directional waves has been used to investigate harbor tranquility in Pohang New Harbor. Comparing numerical results with field data measured at two stations in the harbor, it was found that use of input condition of multi-directional waves is superior to the use of uni-directional waves. Calculations with unidirectional wave input give errors of about 12% at St. P2 and 26% at St. P3, while calculations with multi-directional wave input give errors of 4 % at St. P2 and. 14% at St. P3. Using the input condition of multi-directional waves, we investigate the tranquility of Pohang New Harbor with two layouts : the condition in 1994 when the downtime at the 7th pier was often reported and the condition in 1996 when the 4th disposal site was constructed. The numerical results show that the problem of downtime at the 7th pier cannot be solved by the construction of the 4th disposal site.

• Archives of design research
• /
• v.19 no.2 s.64
• /
• pp.217-228
• /
• 2006

It is obvious that the characteristics of the media are related with the visual expression found in film and video shots. It can be assumed that there would be unavoidable distortion when the space and objects are being framed into an image by the camera and that unavoidable distortion can be utilized for creative expression. Therefore the relationship among the shape of filming zone, the structure of the image, and the strategies of disposition of camera, actors, and objects were studied in accordance with expressional attempts found in film and video images. The classified cases of the expressions found in film and video was studied from the view of the dispositions and movements of the physical elements such as camera, actors, and objects which made the designated expression possible. Finally the organization of method to arrange of the elements used for film within film zone was resulted as the expressional directing methods for filming. Later the usefulness of the method was tested by the application of the method in educational procedure and the evaluation of the analysis of the students' results.

• Journal of The Korean Association of Information Education
• /
• v.25 no.5
• /
• pp.859-869
• /
• 2021

The purpose of this study was to develop an AI liberal arts subject for pre-service teachers of all majors in elementary and middle school. To this end, the main areas of the AI curriculum, sub-themes for each week, and activities were specifically designed and verified through two rounds of Delphi by 13 experts. The AI liberal arts curriculum in this study consists of three areas. Then, detailed topics for each week were confirmed, and a total of 13 weeks were arranged according to the natural flow. It was intended to help teaching and learning by arranging learning activities based on the experiential learning model according to the learning content. It is expected that this study will be used as basic data for the development of various AI education subjects for pre-service teachers in elementary and secondary schools in the future.