• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.2
• /
• pp.145-151
• /
• 2017

As an alternative to conventional explosive methods for demolition of concrete structures and rocks, the use of non-explosive demolition agents can be considered to reduce noise, vibration, and dust emissions during the demolition process. In this study, we conduct finite element analysis for crack initiation and propagation caused by the expansion of non-explosive demolition agents in square concrete structures. The predicted crack patterns are compared with the experimental results in the literature. The minimum values of the required expansion pressure of non-explosive demolition agents are also estimated, which depend upon the arrangement of non-explosive demolition agents and empty holes. Furthermore, we investigate the effect of empty holes on the fragmentation of concrete structures, and discuss the effective arrangement of non-explosive demolition agents and empty holes for fragmentation improvement.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.4
• /
• pp.45-57
• /
• 1992

In this paper, the trends for the standardization of the product model was surveyed, and the product model can be used as concrete means to realize the communication of information between the CAD/CAM softwares, which are used for the design and manufacturing of the complex products such as ships. We have proposed the newly developed methodology for the representation and definition of the ship model on a basis of the product model. And also we have studied the product modeling technology for the aspect of an application, and the object-oriented system technology have been surveyed for the system implementation issues. We would like to verify the consistency and correctness of our proposed representation methodology by using the prototype application model, which is applied to design work of ship compartmentation model. For this purpose we have developed the "OO_COMDEF"(which means the Object-Oriented System for the Compartmentation Definition of ship) program that is applied to the compartmentation model which can be considered as a submodel of the general ship models. The results of research work have been proved that the representation methodology for the ship model based on the product model is an efficient and appropriate scheme for the ship model definitions. Consequently, this methodology can be proposed as a fundamental framework for the development of the shipbuilding CAD/CAM system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.133-141
• /
• 2019

Crew rostering in railway operations is usually done by arranging a crew diagram in accordance with working standards every month. This study was done to identify the problems related to the creation of crew rosters in railway operations and to suggest an optimum crew rostering method that can be applied in railway operations planning. To do this, the work standards of a railway company were identified, and a genetic algorithm was used to develop an optimal roster with equal working time while considering actual working patterns. The optimization process is composed of analysis of the input data, creation of work patterns, creation of a solution, and optimization steps. To verify the method, the roster derived from the proposed process was compared with a manually created roster. The results of the study could be used to reduce the deviation of business hours when generating a roster because the standard deviation of working time is the objective function.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.4
• /
• pp.259-264
• /
• 2023

In this study, we devised a parametric analysis workflow for efficiently analyzing the material properties of 3D woven materials. The parametric model uses wire spacing in the woven materials as a design parameter; we generated 2,500 numerical models with various combinations of these design parameters. Using MATLAB and ANSYS software, we obtained various material properties, such as bulk modulus, thermal conductivity, and fluid permeability of the woven materials, through a parametric batch analysis. We then used this large dataset of material properties to perform a regression analysis to validate the relationship between design variables and material properties, as well as the accuracy of numerical analysis. Furthermore, we constructed an artificial neural network capable of predicting the material properties of 3D woven materials on the basis of the obtained material database. The trained network can accurately estimate the material properties of the woven materials with arbitrary design parameters, without the need for numerical analyses.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.3B
• /
• pp.345-354
• /
• 2008

In this present study, we made a first attempt to investigate physical transformations of incident waves in surf and swash zone and hydrodynamic phenomena of detached and submerged breakwaters. For an accurate simulation of the complicated wave deformation, Three-Dimensional numerical model with Large Eddy Simulation has been developed recently and expanded properly for the current applications, which is able to simulate an accurate and direct WAve Structure Sandy seabed interaction (hereafter, LES-WASS-3D). LES-WASS-3D has been validated through the comparison with experimental results for limited cases, and has been used for the simulation of wave run-up on sandy beach, mean fluid flows over and around submerged structures and swash zone (alongshore/rip current), and spatial distribution of wave height in wide fluid regions. In addition, a strategy of efficient deployment ($Y/L_i=1.50{\sim}1.75$, $W/L_r=0.50$) of the submerged breakwaters has been discussed.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.7
• /
• pp.353-360
• /
• 2007

Rapid urbanization and population increasing are making a high-rise residential building and high-density residential area. According to spacial concentration of population is occurred road traffic noise problem. Now we are popularly using almost only noise barrier installation, but it makes many disfunctions such as poor landscape, low noise barrier performance and crimes. The purpose of this research is to figure out which is best method one the traffic noise management. Alternative are composed to building layout type ($30^{\circ},\;90^{\circ},\;180^{\circ}$), separation between road and residential building, noise barrier types(noise barrier only, noise barrier and forests and etc). The noise barrier are shown to reduce barrier and building layout angle $30^{\circ}$ position is the best comparing with horizontal and vertical layouts. The gab distance is decreased approximately noise level 5dB(A). We figured out there are noise important method except noise barrier wall and it was analyzed how much decreased. This can be very useful before making a road planning and residential building design.

• Journal of Advanced Navigation Technology
• /
• v.28 no.5
• /
• pp.623-631
• /
• 2024

Currently, the Korean military is promoting a small satellite system project to establish a command and control system that can quickly respond to various threats from all directions, not only from North Korea. In this paper, we present a nonlinear control law to acquire the geometry of a small cluster satellite deployment using a low-thrust electric propulsion system, the Hall thruster. The control law is obtained by applying the general Lyapunov's control theory and analytical solution for the on-off control of the electric thruster, and it is a technique that can effectively deploy the orbital configuration of the satellite constellation by controlling only the semi-major axis of the six elements of the orbit. In this study, the stability of the developed control law is verified and the results are analyzed for application to a very small satellite system.

• Journal of the Korean Society of Radiology
• /
• v.14 no.7
• /
• pp.881-889
• /
• 2020

The objective of this study was to quantitatively measure the changes in radon concentration due to ventilation and air purification plants in the lower and upper floors of a building. This study measured and compared radon concentration in the lower and upper floors of the building by using a radon meter when the room was closed, it was ventilated, and air purification plants were installed at a specific time. One-way ANOVA was conducted to evaluate the effect of treatment (i.e., closure, ventilation, and air purification plants) on radon concentration. The results of this study showed that ventilation and air purification plants significantly decreased radon concentration in the lower and upper floors of the building, but the effect of ventilation and that of air purification plants were not significantly different. Therefore, it will be possible to reduce radon concentration effectively when ventilation and air purification plants are used appropriately.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.3
• /
• pp.155-163
• /
• 2023

Real-time monitoring technology is critical for ensuring the safety and reliability of nuclear power plant structures. However, the current seismic monitoring system has limited system identification capabilities such as modal parameter estimation. To obtain global behavior data and dynamic characteristics, multiple sensors must be optimally placed. Although several studies on optimal sensor placement have been conducted, they have primarily focused on civil and mechanical structures. Nuclear power plant structures require robust signals, even at low signal-to-noise ratios, and the robustness of each mode must be assessed separately. This is because the mode contributions of nuclear power plant containment buildings are concentrated in low-order modes. Therefore, this study proposes an optimal sensor placement methodology that can evaluate robustness against noise and the effects of each mode. Indicators, such as auto modal assurance criterion (MAC), cross MAC, and mode shape distribution by node were analyzed, and the suitability of the methodology was verified through numerical analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.1
• /
• pp.113-121
• /
• 2014

To improve management performance, medical institutions have great attentions to selecting the good employee. Through job placement, recruited employee performing a given task, previous studies have lack of research, how job environment affects the individual perception of job ability and individual performance. Therefore, targeting at the health care professional employees who work in the hospital, 134 questionnaire data collected, this study performed an empirical study on the relationship between person-job fit, self-efficacy and individual performance. Specifically, mediating effect of self-efficacy between person-job fit and individual performance was verified. The results indicate that first, person-job fit appeared to affect significantly to the sub-factor of self-efficacy (self-adjustment, confidence, goal-difficulty). Second, among the self-efficacy sub-factor, self-adjustment, confidence appeared to influence to the individual performance. Third, self-adjustment was fully mediated between person-job fit and individual performance and confidence was partially mediated between person-job fit and individual performance. These findings have the theoretical implications that self-efficacy studies are expanded to environmental factors and practical implications and study's limitations are discussed in terms of hospital organization's human resource management.