• The Journal of the Acoustical Society of Korea
• /
• v.43 no.4
• /
• pp.437-444
• /
• 2024

Bistatic sonar performance varies significantly depending on the ocean environment, the location (latitude, longitude) and water depth of the source and receiver. Therefore, research on optimal deployment of bistatic sonar considering ocean environment is necessary. In this study, we suggest an algorithm to optimize the location and water depth of source and receiver when operating monostatic and bistatic sonar on two spatially separated surface ships in the Ulleung Basin in the East Sea. A particle swarm optimization algorithm was used to search the location and water depth of the source and receiver to maximize the detectable area within the search area. As a result of performing bistatic sonar deployment using the algorithm proposed in this study, the detectable area increased as the number of model iterations increased. Additionally, it was confirmed that the source and receiver on the two surface ships converged to the optimal location and water depth.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.1
• /
• pp.43-52
• /
• 2011

Unnecessary transportation of resources are one of the major causes that adversely affect construction site work productivity. Therefore, layout related studies have been conducted with efforts to develop management technologies and techniques to minimize the resource transportation made at site-level. However, although the necessity for floor-level layout planning studies has been increasing as buildings have become larger and floors have become more complicated, studies to optimize the transportation of materials inside buildings are currently not being actively conducted. Therefore, in this study, a model was developed using genetic algorithms(GA) that will enable the optimization of the locations of finishing materials on the work-floor. With the established model, the arrangement of diverse materials on complicated floors can be planned and the optimized material layout planning derived from the model can minimize the total material transportation time spent by laborers during their working day. In addition, to calculate travel distances between work sites and materials realistically, the concept of actual travel distances was applied. To identify the applicability of the developed model and compare it with existing methodologies and analyze it, the model was applied to actual high-rise residential complexes.

• Journal of the Korea Convergence Society
• /
• v.11 no.4
• /
• pp.11-16
• /
• 2020

As a plan for oil spill accidents, research to collect and analyze optimal equipment assignments is essential. However, studies that have diversified and analyzed the optimal equipment assignments for responding to oil spill accidents have not been preceded. In response to the need for analyzing optimal equipment assignments study, we devised a genetic algorithm for optimal equipment assignments. The designed genetic algorithm yielded 10,000 optimal equipment assignments. We clustered using the k-means algorithm. As a result, the two clusters of Yeosu, Daesan, and Ulsan, which are expected to be the largest spills, were clearly identified. We also projected 16-dimensional data in two dimensions via Sammon's mapping. The projected data were analyzed for distribution. We confirmed that results of the simulation were better than those of optimal equipment assignments included in the cluster.In the future, it will be possible to implement an approximate model with excellent performance based on this study.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.11a
• /
• pp.161-167
• /
• 2007

There were no related papers to study about that training ship's bridge was designed for safety navigation and efficient navigation training. Therefore, at first, on this paper, we grouped domestic training ship's bridge layouts into three classes like as "the front and the rear-type bridge layout", "the twin deck-type bridge layout", and "the single-type bridge layout" by mutually layout type between main bridge and training bridge. Furthermore, we investigated working type of navigation training on each bridge layouts through the questionnaire, and extracted merits and demerits for each bridge layouts to be going on operation and training at the same time. At last, we presented new type training ship's bridge model to improve demerits and to elevate merits above mentioned.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.2
• /
• pp.169-175
• /
• 2008

Usually, domestic training ship's bridge was designed for safe navigation and efficient navigation training. In this paper, we grouped domestic training ship's bridge layouts into three classes such as "the front and the rear-type bridge layout", "the twin deck-type bridge layout", and "the single-type bridge layout" by layout type between main bridge and training bridge. Furthermore, we investigated how to operate navigation training according to the type of bridge layout through the questionnaire, and extracted merits and demerits of each bridge layout in combination of normal operation with navigation training at the same time. We presented new type of training ship's bridge model to improve demerits and to elevate merits.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3B
• /
• pp.153-160
• /
• 2007

Placing antennas of low power base stations below surrounding buildings, as in urban microcells, makes propagation characteristics strongly dependent on the building environment. As a result, propagation in these urban microcells is non-isotropic, so that the assumption of circular cells used in planning of conventional cellular sys toms is no longer valid. Assuming circular cells leads to a more conservative system design, implying more base stations. This work investigates the effect of cell shape, due to non-isotropic propagation, on the out-of-cell interference and Erlang capacity of CDMA system. Propagation is described by measurement derived models for low antennas in a rectangular urban street grid. The analysis is done for soft handoff protocols.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2022.07a
• /
• pp.119-121
• /
• 2022

본 논문은 실내가구 인테리어를 배치하는데 있어 증강현실 기술을 적용하여 작업의 효율성을 높일 수 있는 모델을 연구하였다. 현재 증강현실을 적용하는 프로세스에서는 가구의 이미지를 출력할 때 기업의 규모나 제품의 성격 등에 따라 정보가 제한적으로 제공되는 문제를 안고 있다. 이러한 문제점을 해결하기 위하여 본 논문에서 제시하는 알고리즘을 이용하여 AR 레이블링을 생성함으로써, 가구의 정확한 이미지 추출과 함께 가구에 대한 상세한 정보를 제공 받아 사용자가 원하는 가구들을 증강현실을 통해 쉽게 배치할 수 있도록 하는 연구를 진행하였다. 본 연구는 AR 레이블링의 설계, 구현과 3D 렌더링을 통해 원하는 가구들을 실내에 정확히 배치할 수 있어 소비자의 만족도와 구매욕구를 충족시킬 수 있을 것으로 기대된다.

• Journal of the Korea Concrete Institute
• /
• v.20 no.6
• /
• pp.705-712
• /
• 2008

This study carried out simulation for structural layout design for concrete structures by using the models of the ground structure method. The micro lattice truss is modeled as assemblage of a number of unit cells. The progress of analysis repeat to undergo finite element analysis to feed-back results of stress to the stiffness of each member. Through the repeated this analysis, truss model is represented to form the topological materials and the structural shape with the use of the local stress condition without mathematical optimum tools. It is successful to analyse the shape-layout problem as numerical samples on the lattice truss model.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.25 no.4
• /
• pp.12-17
• /
• 1983

20년전(年前)에 모로코에서 경지정리(耕地整理)와 관개조직(灌漑組織)의 배치(配置)에 관(關)한 모델이 개발(開發)되어 널리 사용(使用)되고 있다. '합리적(合理的) 배치법(配置法)'이라고 이름이 붙은 이 방법(方法)은 토지소유규모(土地所有規模)가 영세(零細)하고 여러가지 밭작물(作物)을 재배(栽培)하는 지역(地域)에서 현대적(現代的)인 농사법(農事法)과 윤환급수(輪環給水)를 하는데 적합(適合)한 방법(方法)이다. '합리적(合理的) 배치법(配置法)'은 다음 두가지의 다른 관개배치법(灌漑配置法)을 결합(結合)시킨 것이다. (1) 현대적(現代的) 집단농사(集團農事), 특(特)히 집단(集團) 경운(耕耘)을 주(主)로 한 농경기술자적(農耕技術者的)인 방법(方法), (2) 관개수로(灌漑水路), 배수로(排水路), 농도등(農道等)을 포함(包含)한 영구적(永久的) 포장관개조직(圃場灌漑組織)을 가진 관개공학기술자적(灌漑工學技術者的)인 방법(方法). 합리적(合理的) 배치법(配置法)은 분산(分散)된 여러개의 작은 필지를 통합(統合)하여 관개(灌漑)에 적합(適合)한 크기로 만드는데 관계(關係)되는 여러가지 요인(要因)을 다루어야 하며 필지의 크기, 지표(地表) 또는 스프링클러등의 관개방법, 작물(作物)의 종류(種類), 윤작(輪作), 농업(農業)의 기계화등(機械化等)이 이에 속(屬)한다. 이 방법(方法)을 적용(適用)한 지구(地區)에서 나타난 이점(利點)으로는 관개효율(灌漑效率)의 증가(增加), 수량(收量)의 증가(增加), 토지이용률(土地利用率)의 증가(增加), 현대적(現代的) 농사법(農事法)의 적용(適用) 증가등(增加等)이 있다.

• Journal of the Korean Institute of Educational Facilities
• /
• v.5 no.2
• /
• pp.30-39
• /
• 1998

The paper analyses the optimum locations of university facilities. Pick up a student restaurant, and, using network model, do that examine the following thing with a purpose. 1) Do comparison examination with a current location and optimum location of restaurant. 2) Plan an location of existing restaurant again, and examine location of new restaurant. As a result, made clear what that did the total sum of distance with a minimum could utilize.