• Korean Journal of Construction Engineering and Management
• /
• v.15 no.5
• /
• pp.71-81
• /
• 2014

As domestic construction investment has been gradually reduced, the issue of expanding overseas CM market has increased. Strengthening CM capability from the view point of project life-cycle is required in overseas CM market. However, current regulations institutionally force public CM services to focus on the construction phase. Therefore, Korean CM firms can hardly have the opportunities for accumulating technical competitiveness especially for pre-construction phase. Result of this study shows that the total efforts in terms of man-hours for the construction phase is found to be more than 78 percent in domestic public CM projects. In this context, this study proposes the policies and tasks for improving 'rigid man-hour placement', 'unreasonable CM fee standards', 'CM firm selection method', 'unreasonable business scope decision', and 'evaluation of owner's project management capability' in order to improve domestic CM Industry as well as to expand overseas CM market successfully.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.362-367
• /
• 2006

지능형 주거공간에서 손 지시 명령을 통하여 가전기기를 선택하거나 로봇에게 이동하여야 하는 장소를 알려 주기 위해, 기존의 시스템은 선택되는 대상 기기의 3 차원 절대 위치를 미리 알고 있어야 한다. 또한 카메라 위치가 변동되었을 경우, 카메라의 위치를 절대좌표계 기준으로 새롭게 측정해야 하는 불편함이 있다. 이를 해결하기 위해 본 논문에서는 팬/틸트 모듈을 가진 두 대의 USB 카메라를 임의의 위치에 배치하더라도, 두 번의 손 지시만으로 선택 대상이 되는 기기의 3 차원 위치를 파악하고 이를 동작시키는 방법을 다룬다. 제안하는 방법에서는 두 대의 카메라 간의 상대 좌표계를 형성하기 위해 각 카메라에 표식을 부착한다. 각 카메라에서 다른 카메라의 표식을 관찰하면 카메라 간의 거리 및 각도를 구할 수 있기 때문에, 하나의 카메라를 기준으로 3 차원 절대 좌표계를 자동으로 설정할 수 있다. 또한, 두 대의 카메라로 사용자의 얼굴과 손을 검출하면 얻어진 기준 좌표계에 대해 얼굴과 손의 3 차원 위치를 계산하고, 두 지점을 연결하는 방향 벡터를 구함으로써 사용자가 손으로 지시하는 방향을 찾는다. 따라서, 카메라를 임의의 위치에 두더라도 사용자의 손 지시 동작만으로 대상체의 차원 위치를 파악할 수 있게 된다. 개발된 시스템의 유용성을 검증하기 위해 각 가전기기의 위치를 제안한 방법으로 구하고 실제 위치와의 오차를 분석하였다. 제안한 방법은 두 대의 USB 카메라와 일반 PC 또는 마이크로 프로세서만으로 구현할 수 있기 때문에 비용이 적게 들고 실시간 처리가 가능하며 사용자의 환경에서 편리성을 높이는 등 많은 장점을 가진다.

• Journal of Korean Academy of Nursing Administration
• /
• v.22 no.3
• /
• pp.209-219
• /
• 2016

Purpose: To analyze the proportion of medical institutions meeting the legal standard for nurse staffing. Methods: Data collected from 29,282 institutions between 1996 and 2013 were analyzed. Nurse staffing was measured as daily patient census per registered nurse (RN). The standard for general hospitals, hospitals, and clinics is 2.5 or less, and that for long-term care hospitals is 6.0 or less of the daily patient census per RN. Clinics may substitute nursing assistants for RNs by 50% or 100% depending on their daily inpatient census; long-term care hospitals may substitute nursing assistants for RNs by two thirds of the required number of RNs. Results: The proportion of general hospitals, hospitals, clinics, and long-term care hospitals meeting the standards was 63%, 19%, 63%, and 94%, respectively, in 2013. While general hospitals had an increase in the proportion during the 1996-2013 period, small changes were found in hospitals and clinics. In 2013, nurses were estimated to care for 16 (interquartile range: 12~24) patients per shift in general hospitals. Three quarters of clinics had no RNs in 2013. Conclusion: Many medical institutions did not meet the legally mandated minimum staffing level. The government must implement policy actions for all medical institutions to meet the legal standards.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.4
• /
• pp.87-94
• /
• 1990

In this study, the block adjustments are perfomed by bundle adjustment method of analytical photogrammetry, and the characteristics of 3-dimensional errors for the objects are analysed. The optimal arrangement and configuration of the control points is selected from various arrangements and configurations of control points, and the accuracies of result obtained by block adjustment and by single model adjustment are compared, And the accuracy of bundle block adjustment is compared with that of the independent model triangulation which is another method in block adjustment with additional parameters by selecting the suitable systematic error model. As a result of this study, an the effective method to improve accuracy in close-range photogrammetry was presented by forming blocks and using bundle block adjustment with proper arrangement and configuration of control poinst.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3A
• /
• pp.523-532
• /
• 2006

It is thought that the suggestion of efficient and rational design guideline based on the behavior evaluation of bridge structure system the included cross beam is necessary for the construction efficiency of two-I girder steel bridges. Therefore, in this study, the effects of influence parameters are investigated by the behavior analyses of the bridges, in which the influence parameters are location, spacing and rigidity of the cross beam. For this study, the existed two-I girder steel bridges firstly were selected with the model of case study and the FE analyses for some case models were performed to estimate the action of the cross beam in the bridge. From the analyses, it was estimated that if it consider local stress and load distribution of a floor system, shell and solid elements are compatible to modeling of the cross beams. Also, the efficient design guideline for the cross beam of two-I girder steel bridge was suggested from parameter studies used location, spacing and rigidity of the cross beam.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.188-192
• /
• 2009

2002년의 태풍 루사와 2003년의 태풍 매미 이후 수공구조물의 설계기준에 대한 관심이 커지고 있는 가운데, 댐 설계기준인 가능최대강수량 및 가능최대홍수량 산정의 일관성에 대한 문제가 제기된 바 있다. 그러나 이러한 문제들은 우리나라의 전반적인 기후, 강수형태, 지형 등을 종합적으로 고려하고, 장기간에 걸쳐 진행되어야 할 연구로 단기간 내의 분석을 통한 해결책 제시는 어렵다고 할 수 있다. 본 연구에서는 가능최대강수량의 공간분포 시 등우선 배치에 따른 가능최대강수량의 면적별 감소율을 분석하여 제시하고자 한다. 이를 위해 우리나라의 대표 유역인 한강 유역, 낙동강 유역, 금강 유역의 수자원단위유역을 기준으로 유역면적과 배치된 등우선 면적간의 차에 대한 가능최대강수량의 감소율을 분석하였다. 이때 대상유역별 가능최대강수량은 국토해양부에서 제공하는 가능최대강수량도에서 값을 읽었고, 가능최대강수량의 포락방법에 따라 기존 방법 및 Horton 경험식과 spline식을 이용하는 경우로 구분하여 공간분포 방법을 적용하였다. 그 결과 기존에 사용하고 있는 포락방법을 적용하여 가능최대강수량을 산정한 경우에는 한강, 낙동강, 금강 유역의 지속기간별 면적차에 대한 감소율을 회귀식의 형태로 도출할 수 있었으나, Horton 경험식과 spline 방법을 이용하여 포락을 수행한 경우에는 PMP의 감소량 및 감소율은 지속기간, 면적차 또는 면적차비율에 대해 뚜렷한 경향성을 나타내지는 못하는 것으로 분석되었다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.5 no.1
• /
• pp.55-70
• /
• 2003

Ammunition magazine, which is installed on the ground, has difficulty in protecting from the external attack, and accidental explosion should cause great damage to the life and property. For these reasons, it is needed to develop underground magazine that it has the advantages of safety, security and maintenance. This paper introduce the design case for blasting facilities, which should resist blasting pressure, as well as layout of underground magazine, which takes a safety for explosion and a working space of loading/unloading machine into consideration. On the layout, in case of ${\bigcirc}{\bigcirc}$ underground magazine, put three storage chambers in position almost parallel with principle stress direction, where less effected on discontinuity and hard rock area. Also, secured safe distance according to safety criteria of the Defense Ministry, and verified suitable layout by trace simulation for loading/unloading machine on working stage. Blasting design was performed on evaluation of maximum blast pressure between donar and acceptor chambers, and design condition for blast door, valve, etc. Diminution facilities against explosion, such as thrust block or debris trap, determined its size after plan in accordance with blasting criteria and calculation by structural analysis.

• The KIPS Transactions:PartA
• /
• v.14A no.6
• /
• pp.357-362
• /
• 2007

In distributed systems like cluster systems, in order to get more performance improvement, the initial task placement system precisely estimates and correctly assigns the resource requirement by the process. The resource-based initial job placement scheme needs the prediction of resource usage of a task in order to fit it to the most suitable hosts. However, the wrong prediction of resource usage causes serious performance degradation in dynamic load balancing systems. Therefore, in this paper, to resolve the problem due to the wrong prediction, we propose a new load metric. By the new load metric, the resource-based initial job placement scheme can work without priori knowledge about the type of process. Simulation results show that the dynamic load balancing system using the proposed approach achieves shorter execution times than the conventional approaches.

• Journal of Korean Society of Steel Construction
• /
• v.22 no.4
• /
• pp.325-334
• /
• 2010

In this study, an unbraced five-story steel-framed structure was designed in accordance with KBC2005 to understand the features of structural behavior for the arrangement of semi-rigid connections. A pushover analysis of the structural models was performed, wherein all the connections were idealized as fully rigid and semi-rigid. Additionally, horizontal and vertical arrangements of the semi-rigid connection were adopted for the models. A fiber model was utilized for the moment-curvature relationship of the steel beam and the column, and a three-parameter power model was adopted for the moment-rotation angle of the semi-rigid connection. The top displacement, base-shear force, required ductility for the connection, sequence of the plastic hinge, and design factors such as the overstrength factor, ductility factor, and response modification coefficient were investigated using the pushover analysis of a 2D structure subjected to the equivalent static lateral force of KBC2005. The partial arrangement of the semi-rigid connection was found to have secured higher strength and lateral stiffness than that of the A-Semi frame, and greater ductility than the A-Rigid frame. The TSD connection was found suitable for use for economy and safety in the sample structure.

• The Korean Journal of Archival Studies
• /
• no.58
• /
• pp.31-63
• /
• 2018

The foremost priority for establishing record management of public institutions is strengthening the function and role of the records centers in the institutions and creating the foundation of the organization and personnel for demonstrating professionalism of archivists. However, concept of current records center is not clear and there is no substance of the organization. It also says that once a records manager is deployed, a records center is founded since appointment criteria for archivists is prone to be interpreted subjectively by the institutions. Therefore, it's time for more concrete improvements to resolve these issues. This research analyses some problems found in the system of records centers in the main office and district offices of education focusing on the environment of them. The problems are centers without substance in district offices of education because of the organization structure that all authority has been assembled in the main office, and the reality of records managers who have fallen into records discarders, etc. To solve these problems, this paper proposes changing the appointment criteria for archivists, operating an integrated records center reflecting the intensive working system, and legislating special act on record management of educational institutions.