• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2006.04a
• /
• pp.338-341
• /
• 2006

본 연구에서는 지하수내 TCE 농도가 높은 2개 지역을 선정하여 3회에 걸쳐 공기탈기법 시험을 실시하였다. 2개 지역의 지하수내 TCE 배경 농도는 각각 0.360, 0.317 mg/L이며 반응조에 주입된 공기는 각각 17.14, 44.78, 76.51 L/min의 비율로 주입하였다. 또한 반응조에서 배출되는 기체내의 TCE의 농도를 측정하기위해 PID(photo-ionization detector)를 장착하여 측정하였다. PID를 이용하여 배출되는 기체를 측정한 결과, TCE 농도는 $6{\sim}8$분만에 최고 농도로 배출되었고 시간이 지날수록 천천히 감소하는 형태를 나타내었다. 반응조내의 TCE 농도 변화는 공기 유입 속도에 따라 매우 큰 변화를 나타내었다. TCE가 17.14 L/min의 공기유입속도에서 160분 동안 64%, 44.78 L/min에서 135분 동안 93%, 76.51 L/min에서 120분 동안 95.3%가 제거되었다. 따라서 TCE를 제거하기 위한 DAS 기법은 공기의 주입비율에 따라 제거 속도의 큰 변화를 보였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.7
• /
• pp.737-744
• /
• 2012

A mobile emission laboratory (MEL) was designed to measure the amount of traffic pollutants, with high temporal and spatial resolution under real conditions. Equipment for the gas-phase measurements of CO, NOx, $CO_2$, and THC and for the measurement of the number, concentration, and size distribution of fine and ultra-fine particles by an FMPS and CPC was placed in a minivan. The exhausts of different types of vehicles can be sampled by an MEL. This paper describes the technical details of the MEL and presents data from the experiment in which a car chases passenger vehicles fuelled by diesel and gasoline. The particle number concentration in the exhaust of the diesel vehicle was higher than that of the gasoline vehicle. However, the diesel vehicle with a DPF emitted fewer particles than the vehicle equipped with a gasoline direct injection engine, with particle diameters over 50 nm.

• Bulletin of Korea Environmental Preservation Association
• /
• v.6 no.3
• /
• pp.32-36
• /
• 1984

• Bulletin of Korea Environmental Preservation Association
• /
• v.6 no.2
• /
• pp.33-37
• /
• 1984

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2005.10a
• /
• pp.70-74
• /
• 2005

최근에 국내에서 활발히 보급되기 시작한 폐기물 고형연료(Refuse-Derived Fuel : RDF)에 적합한 HCl 배출 저감설비의 개발에 필요한 기본적인 자료를 확보하기 위한 첫 번째 단계로서 RDF 연소시의 HCl 생성 및 저감 특성에 대한 실험실적인 기초 실험을 수행하였다. 개당 무게가 $2{\sim}3\;g$ 정도인 RDF 시료는 실험실적 방법으로 제조하였고, Ca 계통의 흡수제를 선택하여 RDF 중의 Cl 함량 및 원료 조성에 따른 HCl 배출농도 및 흡수제 사용량, Ca/Cl 몰비에 따른 HCl 제거효율, 연소 조건별 생성물질, 반응온도별 HCl 배출농도 및 회재의 Cl 함량, 흡수제별 HCl 저감효율 변화 등을 살펴보았다. 또한 40 kg/hr과 200 kg/hr의 용량을 가진 RDF 연소용 실험설비에서 측정된 HCl 배출농도, RDF의 Cl 함량, 회재 종류별 Cl 함량 분포 등을 기초실험 결과와 비교분석하였다.

• Journal of the Korean earth science society
• /
• v.34 no.3
• /
• pp.209-223
• /
• 2013

The purpose of this study was to estimate the contributed concentration of each emission source to $CH_4$ by verifying the simulated concentration of $CH_4$ in the Korean peninsula, and then to compare the $CH_4$ emission used to the $CH_4$ simulation with that of a box model. We simulated the Weather Research Forecasting-Community Multiscale Air Quality (WRF-CMAQ) model to estimate the mean concentration of $CH_4$ during the period of April 1 to 22 August 2010 in the Korean peninsula. The $CH_4$ emissions within the model were adopted by the anthropogenic emission inventory of both the EDGAR of the global emissions and the GHG-CAPSS of the green house gases in Korea, and by the global biogenic emission inventory of the MEGAN. These $CH_4$ emission data were validated by comparing the $CH_4$ modeling data with the concentration data measured at two different location, Ulnungdo and Anmyeondo in Korea. The contributed concentration of $CH_4$ estimated from the domestic emission sources in verification of the $CH_4$ modeling at Ulnungdo was represented in about 20%, which originated from $CH_4$ sources such as stock farm products (8%), energy contribution and industrial processes (6%), wastes (5%), and biogenesis and landuse (1%) in the Korean peninsula. In addition, one that transported from China was about 9%, and the background concentration of $CH_4$ was shown in about 70%. Furthermore, the $CH_4$ emission estimated from a box model was similar to that of the WRF-CMAQ model.

• Cement Symposium
• /
• no.32
• /
• pp.172-177
• /
• 2005

• Journal of Energy Engineering
• /
• v.22 no.2
• /
• pp.128-135
• /
• 2013

In order to estimate the combustion characteristics and the gas interchangeability for natural gas with various compositions per each production area, equivalent gas are using to replace natural gas. It is known that an equivalent gas has the same the heating value, the compression factor, the relative density, CO emission and the burning velocity as the original natural gas. However, it is not reported that the flame shape and thermal efficiency and NOx emission by real gas appliance. In this study, equivalent gas was examined the validation to replace natural gas. The CO emission the burning velocity and the flame temperature were reconfirmed, and the flame shape, the NOx emission and the thermal efficiency were numerically and experimentally investigated. As results, there was not a large difference between natural gas and equivalent gas. This result demonstrated that there was no problem using equivalent gas to replace natural gas.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.9
• /
• pp.2313-2321
• /
• 2014

A concentration meter is widely used at purification plants, sewage treatment plants and waste water treatment plants to sort and transfer high concentration sludge and to control the amount of chemical input. This study has been prepared for improving efficiency of operation on sludge processes and to establish a basic for factory automation by accuracy improvement and problem solution of sludge concentration meter. The concentration meter's accuracy and stability is improved by applying multi-beam sensors and minimum deviation linear average filtering. Furthermore maintenance without cut-off of water in sludge operation is possible by detachable sensors. The performance of multi-beam concentration meter has been variously verified by the pilot plant experiment.

• Korean Chemical Engineering Research
• /
• v.54 no.1
• /
• pp.22-35
• /
• 2016

In this study CALPUFF modeling was performed to establish a correlation between regions of frequent civil odor complaints near Gumi national industrial complex and odor-emission facilities of synthetic fiber manufacturers in the same area as main acetaldehyde-emission point sources. As a result of the CALPUFF modeling, the maximum concentration of acetaldehyde in Gumi national industrial complex was reduced from O ($10^{-5}g/m^3$) to O ($10^{-6}g/m^3$) upon improving emission facilities of T company so that the maximum concentrations of acetaldehyde frequently appeared in complex 3. In addition, the predicted range of the maximum acetaldehyde concentration in Gumi national industrial complex was also improved in comparison with that prior to improving emission facilities of T company. These maximum concentrations of acetaldehyde obtained to estimate the expected contribution of total acetaldehyde point source by CALPUFF modeling showed the similar values to those measured in 'HAPs investigation in the region of Gumi-Daegu' and were consistent to the trend of civil odor complaints. Therefore, the expected contribution of total acetaldehyde point source was validated. The relative contribution of T company upon improving its emission facilities was predicted to be lowered by more than factor of two, compared to that prior to improving its emission facilities. To the contrary, the relative contribution of W company upon improving emission facilities of T company was predicted to be increased by more than factor of two, compared to that prior to improving emission facilities of T company. This indicates that the contribution of aldehyde point sources of W company was relatively increased upon improving emission facilities of T company.