• 제목/요약/키워드: 배전 선로

검색결과 671건 처리시간 0.027초

신에너지전원이 연계된 배전계통에서 분류효과에 의한 보호기기 부동작에 관한 연구 (A Study on the Mal-Function of Protection Devices By Dividing Effect in Distribution System with New Energy Sources)

  • 박현석;이범태;박오성;노대석
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2009년도 춘계학술발표논문집
    • /
    • pp.641-644
    • /
    • 2009
  • 일반적으로 신에너지전원(분산전원)이 설치되면, 연계지점 위치와 사고발생 위치에 따라 % 임피던스의 병렬화로 사고전류가 감소하는 분류효과가 발생할 수 있다. 이 때, 보호기기의 최소 정정치 이하로 사고전류가 감소하여 보호기기가 부 동작(동작해야 하는데 동작하지 않은 경우)하는 문제점이 발생한다. 본 연구에서는 현행 분산전원 연계기준 및 선로운영기준을 토대로 어떤 경우에 각 보호기기의 최소 정정치에 미달하는 지 사례 및 최악조건을 제시한다. 본 논문에서는 대칭좌표법을 이용하여 보호기기의 부 동작의 주요 원인이 되는 분류효과에 대한 문제점을 분석하고, 이에 대한 대책방안을 제시한다.

  • PDF

22.9kV 이중접지 배전선로 고저항 지락 검출 (High Impedance Fault Detection on 22.9kV Multigrounded Distribution System)

  • 박영문;이기원;임주일;윤만철;유명호
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
    • /
    • pp.463-468
    • /
    • 1987
  • In this paper, a high impedance fault detection on 22.9kV multigrounded distribution system that has been very difficult by any existing conventional protective relaying systems is studied. Because the fault current is very low, it cannot be distinguished from neutral current caused by load unvalanced on multigrounded distribution system. We developed the new and best algorithms of high impedance ground fault detection. This algorithms are 'the even order power method, even order ratio method', 'and even order ratio varience method'. Using this algorithms, a detection device for high impedance faults is constructed and tested in the laboratory. And continually, it is installed and has been tested in KEPCO substations.

  • PDF

배전선로(配電線路)의 전압개선(電壓改善) 대책(對策)에 관한 연구(硏究)(I) (The Study on the Voltage Improvement in Distribution Line(I))

  • 김호용;노대석;손수국;김상준;송일근
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
    • /
    • pp.888-891
    • /
    • 1988
  • Recently, with the expansion of electronic equipment and computer facilities, good quality of services is required. This paper describes how to improve distribution system voltage by the Tap position seletion of P. Tr, by the decision of the optimal sending voltage in substation and we also developed three phase load flow program in distribution system. Besides we have developed the digital recording voltmeter that will be utilized with personal computer system. This meter will be useful, economical and powerful.

  • PDF

적응 유전알고리즘을 이용한 배전계통 계획의 급전선 최적경로 선정 (An Adaptive Genetic Algorithm Based Optimal Feeder Routing for Distribution System Planning)

  • 김병섭;김민수;신중린
    • 대한전기학회논문지:전력기술부문A
    • /
    • 제50권2호
    • /
    • pp.58-66
    • /
    • 2001
  • This paper presents an application of a newly designed Adaptive Genetic Algorithm (AGA) to solve the Optimal Feeder Routing (OFR) problem for distribution system planning. The main objective of the OFR problem usually is to minimize the total cost that is the sum of investment costs and system operation costs. We propose a properly designed AGA, in this paper, which can handle the horizon-year expansion planning problem of power distribution network in which the location of substation candidates, the location and amount of forecasted demands are given. In the proposed AGA, we applied adaptive operators using specially designed adaptive probabilities. we also a Simplified Load Flow (SLF) technique for radial networks to improve a searching efficiency of AGA. The proposed algorithm has been evaluated with the practical 32, 69 bus test system to show favorable performance. It is also shown that the proposed method for the OFR can also be used for the network reconfiguration problem in distribution system.

  • PDF

전류분배계수를 이용한 배전계통 고장점 표정 알고리즘 (A fault location algorithm using current distribution factors for D/S)

  • 이덕수;진보건;이승재;최면송;강상희;안복신;윤남선
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 추계학술대회 논문집 전력기술부문
    • /
    • pp.275-277
    • /
    • 2001
  • This paper presents a fault location algorithm using current distribution factors for distribution feeder systems. When a fault occurs in distribution system, an accurate fault distance is important for fast fault restoration. The proposed algorithm achieves a high accuracy using negative sequence circuit with various fault conditions.

  • PDF

불평형시 반복추정기법을 이용한 배전계통 고장점 표정 알고리즘 (A fault location algorithm using iterative method at unbalance conditions for distribution feeder systems)

  • 이덕수;진보건;이승재;최면송;강상희;안복신;윤남선
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 추계학술대회 논문집 전력기술부문
    • /
    • pp.121-123
    • /
    • 2001
  • This paper presents a fault location algorithm using iterative method at unbalance condition for distribution feeder systems. Distribution feeders include single phase and three phase laterals. The proposed algorithm achieves a high accuracy by continuously updating voltage and current phasor using the phase components and admittance load model.

  • PDF

전류 파형을 이용한 배전계통에서의 고장점 진단 전문가 시스템 (An Expert System Using Current Waveform for Dignosis of Fault Location on Electric Power Distribution System)

  • 진보건;이덕수;이승재;최면송;강상희;안복신;윤남선
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 추계학술대회 논문집 전력기술부문
    • /
    • pp.278-281
    • /
    • 2001
  • Identifying the fault location has to deal with multiple possible candidates. It presents a new technique to diagnosis a fault region. The proposed diagnosis scheme identifies accurately the location based on the protective device operations and load current change at the substation. An Expert system is presented using these facts.

  • PDF

22.9[kV] 배전선로 주변의 전장과 자장의 분포 (Profiles of electric and magnetic fields in the vicinity of 22.9[kV] Distribution Line)

  • 이복희;길형준;안창환
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1998년도 하계학술대회 논문집 E
    • /
    • pp.1653-1655
    • /
    • 1998
  • In this paper, measurement and analysis of ELF electric and magnetic fields in the vicinity of 22.9[kV] distribution line have been performed. The height of measuring point from the earth's surface was 1[m], and the distance between the device and the operator was more than 3[m]. The experiments have been carried out by lateral profile, and we have made use of FIELDS program for the sake of comparision the experimental data with the theoretical value. Electric and magnetic fields intensity were strong under a distribution line, and were inversely proportional to lateral distance. The profiles of electric field were M shape and those of magnetic field were $\cap$ shape. Electric and magnetic fields intensity were increased with increasing the measurement height.

  • PDF

배전용 애자장치의 열화특성 및 선로사고와의 상관관계에 관한 연구 (A Study on the Relation of Fault in Distribution Line by Insulator deterioration)

  • 김태원;신정훈;박성택
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1998년도 하계학술대회 논문집 E
    • /
    • pp.1666-1669
    • /
    • 1998
  • In General, Distribution Line is largely effected by temperature, humidity and natural system's condition. The power system network, particularly fault of power distribution system connected to comsumer would cause a magnificent effect to the society. And then Improvement in living conditions and increase in the industrial production brought by the development in economy and new technology, in due course, ask more and reliable electric energy. In this paper, we will describes that the effection of deterioration in Insulator and its relation of fault in power system.

  • PDF

22.9 KV-y 배전선로 통신 유도장해전압(RIV)감소 대책에 관한 연구 (A study on radio interference voltage(RIV) reduction of 22-9 KV-y distribution line)

  • 전영갑;선종호;조국희
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1998년도 하계학술대회 논문집 E
    • /
    • pp.1670-1674
    • /
    • 1998
  • Now and then there are many electrical accidents between cable and line post insulator which is degraded by long time using, causing leakage current on the surface of insulator. In this paper it is denied that the 22.9 KV-y distribution lines are protected by binding cover which is needed from fog or rainy moisture, surges occurring by swiching or lightening pulse. It is analyzed to investgate the unballanced transfer characteristics and reflection coefficient by using bidding cover and non-cover. It was tested the radio interference voltage in the test room. In the factory it was tested the amount of leakage current causing on the surface of insulator in the state of no load and 70(%) load.

  • PDF