• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.3
• /
• pp.147-152
• /
• 2013

Purpose: The aim of this study was to propose the position of maxillary anterior teeth and intercanine width measurements based on the incisive papilla in accordance with the cephalic type and gender of dentate Korean adult with normal teeth alignment. Materials and methods: 42 students with Class I normal occlusion, without crowding or spacing, were selected from the Chonnam National University School of Dentistry. The lateral skull radiographs of the subjects were taken and were classified as different cephalic types, based on their PFH / AFH ratios. 42 casts of their maxilla were prepared and both the distance between the upper central incisors and the middle of the incisor papilla was measured with a vernier caliper (A) and the distance between the maxillary canine cusp tips (B) were measured. Statistical analysis was performed using SPSS version 15 and their significance was investigated. Results: For dolichocephalic group, the mean values for A and B were 8.43 (SD: 0.61) and 36.73 (SD: 2.17), respectively. The mean value for A was 8.51 (SD: 1.27) for the mesocephalic group and 8.76 (SD 1.03) for the brachycephalic group. The mean value for B was 35.91 (SD: 1.86) for the mesocephalic group and 37.34 (SD: 2.23) for the brachycephalic group. For the male group, the mean A value was 8.86 (SD: 1.04) and the mean B value was 37.60 (SD: 0.24). For the female group, the mean A value was 8.41 (SD: 0.93) and the mean B value was 36.18 (SD: 2.01). The difference between male and female group in A values were not statistically significant (P>.05). The B values of the male subjects were greater than those of the female subjects and was statistically significant (P<.05). Conclusion: 42 students with normal dentition and occlusion in korea, the distance from the incisive papilla and the incisal edge of maxillary central incisors had no difference in cephalic type or gender. However, the distance between the cusp tip of both canines had significant difference in gender where the male showed higher values than the female, while having no difference in cephalic types.

• Cartoon and Animation Studies
• /
• s.35
• /
• pp.107-128
• /
• 2014

Cultural Content industries based on imagination and creativity are attracting attention and the animation high value-added industry is still spotlighted. Among them, Disney Studios make money through using their professional skills. There are the know-how has developed for a long time, and there are timeless strategy. This study is analyzing by fantasy elements for knowing the messages of Disney animation. Fantasy defined as genre of literature by Todorov and Jackson emphasized its social role and significance. Hume expanded the area of fantasy and Tolkein Jahoriski and Boyer classified the fantasy according to the purpose. Through the analyzing Disney animation , Disney's fantasy show the specific expression depending on the target. Disney is based on the three types of fantasy depending on the growth of the journey. The first area is composed of the main character's growth and satisfy the desire and escapism, The second is the word of antagonist who opposed to reality and break the rules of the dominant ideology. The last area is the utopia provided after hero beat the antagonist. Disney characters give the messages by using the fantasy like the transformation or alter ego. That show the subject of the main character's growth and the supporting characters as the expression of the multiple personality of main. These emphasize the hero's growth and give the fun. Also, in the subject of the otherness, the hero always destroy the evil who broke the rules of reality. In this way, the fantasy offered by Disney give the messages of sacrifice and family from true love. Disney has the support of their target audiences continue to be able to convey ideology.

• Cartoon and Animation Studies
• /
• s.48
• /
• pp.359-383
• /
• 2017

3,000 years ago, since the first poster of humanity appeared in Egypt, the invention of printing technique and the development of civilization have accelerated the poster production technology. In keeping with this, the expression of poster has also been developed as an attempt to express artistic sensibility in a simple arrangement of characters, and now it has become an art form that has become a domain of professional designers. However, the technological development in the expression of poster is keep staying in two-dimensional, and is dependent on printing only that it is irrelevant to the change of ICT environment based on modern multimedia. Especially, among the many kinds of posters, the style of movie posters, which are the only objects for video, are still printed on paper, and many attempts have been made so far, but the movie industry still does not consider ICT integration at all. This study started with the feature that the object of the movie poster dealt with the video and attempted to introduce the augmented reality to apply the dynamic image of the movie to the static poster. In the graduation work of the media design major of a university in Korea, the poster of each works for promoting the visual work of the students was designed and printed in the form of a commercial film poster. Among them, 6 artworks that are considered to be suitable for augmented reality were selected and augmented reality was introduced and exhibited. Content that appears matched to the poster through the mobile device is reproduced on a poster of a scene of the video, but the text informations of the original poster are kept as they are, so that is able to build a moving poster looked like a wanted from the movie "Harry Potter". In order to produce this augmented reality poster, we applied augmented reality to posters of existing commercial films produced in two different formats, and found a way to increase the characteristics of AR contents. Through this, we were able to understand poster design suitable for AR representation, and technical expression for stable operation of augmented reality can be summarized in the matching process of augmented reality contents production.

• Economic and Environmental Geology
• /
• v.25 no.3
• /
• pp.259-273
• /
• 1992

The Seongsan mine is one of the largest dickite deposits in the southwestern part of the Korean Peninsula. The main constithent minerals of the ore are dickite and quartz with accessory alunite, kaolinite and sericite. The geology around the Seongsan mine consists mainly of the late Cretaceous felsic volcanic rocks. In the studied area, these rocks make a synclinal structure with an axis of E-W direction plunging to the east. Most of the felsic volcanic rocks have undergone extensive hydrothermal alteration. The hydrothermally altered rocks can be classified into the following zones: Dickite, Dickite-Quartz, Quartz, Sericite, Albite and Chlorite zones, from the center to the margin of the alteration mass. Such zonal arrangement of altered rocks suggests that the country rocks, most of which are upper part of the rhyolite and welded tuff, were altered by strongly acid hydrothermal solutions. It is reasonable to consider that initial gas and solution containing $H_2S$ and other compounds were oxidized near the surface, and formed hydrothermal sulfuric acid solutions. The mineralogical and chemical changes of the altered rocks were investigated using various methods, and chemical composition of fifty-six samples of the altered rocks were obtained by wet chemical analysis and X.R.F. methods. On the basis of these analyses, it was found that some components such as $SiO_2$, $Al_2O_3$, $Fe_2O_3$, CaO, MgO, $K_2O$, $Na_2O$ and $TiO_2$ were mobilized considerably from the original rocks. The formation temperature of the deposits was estimated as higher than $200^{\circ}C$ from fluid inclusion study of samples taken from the Quartz zone. On the basis of the chemical composition data on rocks and minerals and estimated temperatures, the hydrothermal solutions responsible for the formation of the Seongsan dickite deposits were estimated to have the composition: $m_{K^+}=0.003$, $m_{Na^+}=0.097$, $m_{SiO_2(aq.)}=0.008$ and pH=5.0, here "m" represents the molality (mole/kg $H_2O$).

• Applied Biological Chemistry
• /
• v.50 no.2
• /
• pp.95-100
• /
• 2007

The cellulase gene of Bacillus licheniformis K11 which has plant growth-promoting activity by auxin and antagonistic ability by siderophore was cloned in pUC18 using PCR employing heterologous primers. The 1.6kb PCR fragment contained the full sequence of the cellulase gene, denoted celW which has been reported to encode a 499 amino acid protein. Similarity search in protein data base revealed that the cellulase from B. licheniformis K11 was more than 97% identical in amino acid sequence to those of various Bacillus spp. The cellulase protein from B. licheniformis K11, overproduced in E. coli DH5${\alpha}$ by the lac promoter on the vector, had apparent molecular weight of 55 kDa upon CMC-SDS-PAGE analysis. The protein not only had enzymatic activity toward carboxymethyl-cellulose (CMC), but also was able to degrade insoluble cellulose, such as Avicel and filter paper (Whatman$^{\circledR}$ No. 1). In addition, the cellulase could degrade a fungal cell wall of Phytophthora capsici. Consequently B. licheniformis K11 was able to suppress the peperblight causing P. capsici by its cellulase. Biochemical analysis showed that the enzyme had a maximum activity at 60$^{\circ}C$ and pH 6.0. Also, the enzyme activity was activated by Co$^{2+}$ of Mn$^{2+}$ but inhibited by Fe$^{3+}$ or Hg$^{2+}$. Moreover, enzyme activity was not inhibited by SDS or sodium azide.

• Progress in Medical Physics
• /
• v.9 no.2
• /
• pp.77-88
• /
• 1998

Wedge shaped isodoses are desired in a number of clinical situations. Hard wedge filters have provided nominal angled isodoses with dosimetric consequences of beam hardening, increased peripheral dosing, nonidealized gradients at deep depths along with the practical consequendes of filter handling and placement problems. Dynamic wedging uses a combination of a moving collimator and changing monitor dose to achieve angled isodoses. The segmented treatment tables(STT) that monitor unit setting by every distance of moving collimator, was induced by numerical formular. The characteristics of dynamic wedge by STT compared with real dosimetry. Methods and Materials : The accelerator CLINAC 2100C/D at Yonsei Cancer Center has two photon energies (6MV and 10MV), currently with dynamic wedge angles of 15$^{\circ}$, 30$^{\circ}$, 45$^{\circ}$ and 60$^{\circ}$. The segmented treatment tables(STT) that drive the collimator in concert with a changing monitor unit are unique for field sizes ranging from 4.0cm to 20.0cm in 0.5cm steps. Transmission wedge factors were measured for each STT with an standard ion chamber. Isodose profiles, isodose curves, percentage depth dose for dynamic wedge filters were measured with film dosimetry. Dynamic wedge angle by STT was well coincident with film dosimetry. Percent depth doses were found to be closer to open field but more shallow than hard wedge filter. The wedge transmission factor were decreased by increased the wedge angle and more higher than hard wedge filters. Dynamic wedging probided more consistent gradients across the field compared with hard wedge filters. Dynamic wedging has practical and dosimetric advantages over hard filters for rapid setup and keeping from table collisions. Dynamic wedge filters are positive replacement for hard filters and introduction of dynamic conformal radiotherapy and intensity modulation radiotherapy in a future.

• Restorative Dentistry and Endodontics
• /
• v.33 no.4
• /
• pp.352-368
• /
• 2008

This study was done to evaluate the reliability of the digital color analysis system (ShadeScan, CYNOVAD, Montreal. Canada) for dentistry. Sixteen tooth models were made by injecting the A2 shade chemical cured resin for temporary crown into the impression acquired from 16 adults. Surfaces of the model teeth were polished with resin polishing cloth. The window of the ShadeScan handpiece was placed on the labial surface of tooth and tooth images were captured, and each tooth shade was analyzed with the ShadeScan software. Captured images were selected in groups, and compared one another. Two models were selected to evaluate repeatability of ShadeScan, and shade analysis was performed 10 times for each tooth. And, to ascertain the color difference of same shade code analyzed by ShadeScan, CIE $L^*a^*b^*$values of shade guide of Gradia Direct (GC, Tokyo, Japan) were measured on the white and black background using the Spectrolino (GretagMacbeth, USA), and Shade map of each shade guide was captured using the ShadeScan. There were no teeth that were analyzed as A2 shade and unique shade. And shade mapping analyses of the same tooth revealed similar shade and distribution except incisal third. Color difference (${\Delta}E^*$) among the Shade map which analyzed as same shade by ShadeScan were above 3. Within the limits of this study, digital color analysis instrument for dentistry has relatively high repeatability, but has controversial in accuracy.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.3
• /
• pp.14-28
• /
• 2010

By philological geography method for dismantling and reconstituting Buyeo's Palkyung(扶餘 八景), which best signify the image of ancient city Buyeo's landscape, this research is to demonstrate the fact that the place's inertia of certain historic sites has been passed down as a type of geographic code. Titled poems and retrospective poems about Buyeo's Palkyung and its spectacles and landscapes reveal the fact that the splendid and glorious cultural heritage of Baekje had faded but its traces have remained in the each eight views including Nakhwa-am(落花巖), Goran-sa(皐蘭寺), and Jayong-dae(釣龍臺). In addtion, the spectacles and historic sites of Buyeo's Palkyung appear as the symbol of Baekje's fall and loss in the poems. Thus, it can be said that Buyeo's culture and civilization have never escaped from the cultural and historical scars of Baekhe's fall, being dominated by the place's inertia originated from the identity as "Baekje'slastcapital". It is ironical that Buyeo's future development and prosperity are not free from its cultural and historical spectacles which bear the image of the fall of Baekje. 'Older Buyeos' Palkyung(扶餘舊八景)' and, Prior Buyeo's Palkyung(夫餘前八景), originate from nine views of an unknown builder and after the construction of pavilions and towers, 'Subuk-jeong eight views(水北亭八景)' by Heungguk Kim(金興國) and the eight poems of the, Retrospect of Buyeo(扶餘懷古八景), were created. 'Buyeo's later Palkyung(扶餘後八景), which are especially free from the site's inertia are known to have expanded the scope of Buyeo's landscape by deliberately demonstrating spectacles and sites different from those of existing views. Nakhwa-am, Goran-sa, Joryong-dae, Songwal-dae(送月臺), Youngwal-dae(迎月臺), and Pyungje-tap(平濟塔) are all located within a one kilometer radius of Banwol-sung(半月城), Buyeo's palace and the Baekma river(白馬江), Daewang-po(大旺浦), Busan(浮山) in a two kilometers radius. Jaon-dae(自溫臺), Subuk-jeong(水北亭), and Gyuam-jin(窺岩津) are located within a three kilometers radius. Even Chunjeong-dae(天政臺), which are located within a four kilometers radius of Banwol-sung are located alongside the Baekma river. This indicates the fact that these spectacles had not been established temporarily or impromptu but for a long period time by historic retrospect and the inertia of landscape's geographic cycle. In conclusion, the geographic phenomenon of historical and cultural inertia appeared because Buyeo had the geographic message of "fallen, ancient city". Therefore, Buyeo's Palkyung which have constant retrospective inertia is clearly an geographic code effective and helpful to understand not only the characteristics of historic sites and spectacles of Buyeo in the Sabi period but also the quality of the site itself.

• Journal of radiological science and technology
• /
• v.35 no.2
• /
• pp.83-92
• /
• 2012

In anteroposterior projection for cervical vertebra, it is general that the incidence angle of X-ray is $15^{\circ}$ to $20^{\circ}$ degrees to head in order to prevent overlap of mandible and occipital bone and to observe array of cervical interbody and shapes of joints. However, the angle is appropriate for foreigners that was determined by foreign literature review long ago, and there have been few researches of incidence angle for Koreans' body type. The purpose of in this study are to identify the incidence angle appropriate for Koreans and to present methodology. In order to measure the incidence angle, 1,044 patients who visited S Hospital located in Seosan were selected and measured of average length of cervical vertebra, OID, axis angle, and FID. The incidence angle was calculated from the applied formula by measuring average values per age groups and sex (see Formula 1 and 2). The average length of cervical vertebra was 6cm: the length was increased from teenagers to twenties but was decreased since thirties. The difference between males and females was around 1cm (p<.01). The OID was almost the same regardless of age groups and sex. As for axis angle, the slope was increased in teenagers and twenties, but was decreased since thirties. The difference between males and females was around 2 degrees (p<.01). The FID measurements were almost the same regardless of age groups and sex, and when the incidence angle was measured from these values, the teenagers were $15.9^{\circ}$, the twenties were $16.9^{\circ}$, the thirties were $16.6^{\circ}$, the forties were $16.2^{\circ}$, the fifties were $15.9^{\circ}$, and the sixties were $14.5^{\circ}$, indicating that the angle was increased from teenagers to the twenties but decreased since the thirties. While the angles of males and females were measured to be the same in the teenagers, the angle was different between males and females by $2^{\circ}$. When the incidence angle statistically analyzed with measurement of average length of cervical vertebra, OID, axis angle, and FID, all of them were shown to have correlations with the incidence angle (p<.01). Conclusively, it was shown that the incidence angle was measured differently from average length of cervical vertebra, OID, FID, and axis slope, as well as from age and sex. Therefore, it can be suggested that the anteroposterior radiation test for cervical vertebra should be conducted by different incidence angles based on age and sex. The data of this study may be used as reference in determining the incidence angle of cervical vertebra tests for the future.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.4
• /
• pp.33-44
• /
• 2005

On the basis of a stepwise and careful integration of various field and laboratory methods the analysis of groundwater flow characterization was performed with five boreholes (BH-1, -2, -3, -4, -5) on a pilot site of Natural Forest Park in Guemsan-gun, Chungcheongbook-do, Korea. The regional lineaments of NW-SE are primarily developed on the area, which results in the development of many fractures of NW-SE direction around boreholes made in the test site for the study. A series of surface geological survey, core logging, geophysical logging, tomography, tracer tests, and heat-pulse flowmeter logging were carried out to determine fracture characteristics and fracture connectivity between the boreholes. In the result of fracture connectivity analysis BH-1 the injection well has a poor connectivity with BH-2 and BH-3, whereas a good with BH-4 and BH-5. In order to analyse the hydraulic connectivity between BH-1 and BH-5, in particular, a conspicuous groundwater outflux in the depth of 12 m and influx in the depth of 65 m and 70 m, but partly in/outflux occurred in other depths in BH-5 were observed as pumping from BH-1. On the other hand, when pumping from BH-5 the strong outflux in the depths of 17 m and 70 m was occurred. The spatial connectivity between the boreholes was examined in the depth of 15 m, 67 m, and 71 m in BH-1 as well as in the depth of 15 m, 17 m, 22 m, 72 m, and 83 m in BH-5.