• Journal of Advanced Navigation Technology
• /
• v.25 no.5
• /
• pp.370-376
• /
• 2021

development of the aerospace industry is increasing the research of projectiles. In addition, many tests are under way and many failures occur accordingly. Projectiles should be able to minimize failures because they are more dangerous than other electronic equipment. Therefore, it is necessary to verify wiring before powering the projectile. Accordingly, the wiring status was verified by resistance measurements. However, the wiring test of the previous resistance measurement method cannot be accurately measured due to devices such as capacitors and inductors in the projectile circuit. In this paper, impedance is measured in the connection state of cables and projectiles using a TDR meter. The Z-Segmentation algorithm is used to set the reference value for the measured steady state impedance. The Z-Segmentation algorithm first finds the peak values of the impedance waveform using a Kalman filter and obtains the final impedance peak segment through segmentation. In this way, the wiring status is determined based on the reference value for the normal state of the wiring.

• Journal of the Korea Institute of Construction Safety
• /
• v.1 no.1
• /
• pp.31-39
• /
• 2018

It is reported that about 20 % of all fires in Korea are caused by the electric equipment and installations. In complex and large-scale buildings, the sizes of electric fires are becoming larger as property damage and casualties increase. Among the causes of various electric fires, fire by short circuit accounts for about 71.5% of overall fires, and in the classification by electric equipment and installation, fire caused by wiring and wiring equipment accounts for approximately 38.3% of overall fires. The purpose of this study is to propose methods to prevent electric fires due to short circuit by improving indoor wiring currently in use and to find the fundamental measures to prevent wiring equipment caused fires by improving the socket and plug which are commonly used in wiring equipment. It is expected that the electric fire prevention measures presented through this study can be used as a measure to protect many people and properties by eliminating the root cause of electric fire.

• 전기의세계
• /
• v.30 no.9
• /
• pp.562-566
• /
• 1981

지난 6월8일부터 6월21일까지 14일간 미국 죠오지어주 아틀랜타시에서 열린 제26회 국제기능올림픽대회에서 옥내배선 직종에 대한 과제선정, 경기진행 및 심사를 담당하였던 한 사람으로서 이 분야에 관심있는 분에게 참고가 되었으면 하는 마음에서 대회의 개황과 옥내배선직종의 경기에 대해서 보고코조 한다.

• Product Safety
• /
• no.9 s.153
• /
• pp.46-47
• /
• 2006

1993년에 설립된 서울산전(주)는 차단기, 배선기구 전문제조업체로 배선용 차단기, 누전차단기, 주택용 분전반 등을 제조하는 소규모 공장에서 출발하여 이제는 관련분야 선두기업으로 성장하였다. 일관된 정책과 철저한 경영방침으로 목표달성에 노력하며 그 동안의 축적된 노하우와 철두철미한 관리로 안정된 바탕위에 꾸준한 성장을 거듭하여 미래지향적 기업으로의 도약을 꿈꾸고 있다.

• Journal of Korea Port Economic Association
• /
• v.25 no.3
• /
• pp.67-92
• /
• 2009

A tugboat (tug) is a boat that maneuvers vessels by pushing or towing them. Tugs move vessels that should not move themselves alone, such as ships in a crowded harbor or a narrow canal, or those that cannot move themselves, such as barges, disabled ships, or oil platforms. Tugboats are powerful for their size and strongly built, some are ocean-going. Historically tugboats were the first seagoing vessels to receive steam propulsion, freedom from the restraint of the wind, and capability of going in any direction. As such, they were employed in harbors to assist ships in docking and departure. Towage is in essence a service by one vessel to another vessel for a fixed remuneration. The most common reason for requiring this service is the lack of its own motive power. Conventionally, towage is defined as "the employment of one vessel to expedite the voyage of another, when nothing more is required than the accelerating of her progress". Apart from accelerating vessels, acquiring towage service is a common practice for towing barges, platform of drilling oil, floating ship yards, etc.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.7 s.349
• /
• pp.20-28
• /
• 2006

A new TWA(Traveling-wave-based Waveform Approximation)-based signal integrity verification method for practical interconnect layout structures which are composed of non-uniform RLC lines with various discontinuities is presented. Transforming the non-uniform lines into virtual uniform lines, signal integrity of the practical layout structures can be very efficiently estimated by using the TWA-technique. It is shown that the proposed technique can estimate the signal integrity much more efficiently than generic SPICE circuit model with 5% timing error and 10% crosstalk error.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1704-1705
• /
• 2011

MEMS(Micro Electro Mechanical Systems) 기술과 니켈 전기도금공정을 이용하여 수십 내지 수백개의 탐침을 갖는 일체형 탐침 패드(Probe Pad)를 제작하였다. PI(Polyimide) Film은 일본 UBE사의 $50{\mu}m$ 두께를 갖는 유피렉스를 사용하였다. 일체형 탐침 패드는 Polyimide Film에 Cu를 증착 후 사진식각공정을 통하여 PR Mold 형성한 후 전류가 흐르는 Cu 라인(line) 배선을 형성하기 위해 Cu를 식각하였으며 형성된 Cu Line 위에 니켈 전해도금공정을 실시하여 니켈 배선을 형성하였다. Ni 배선 위에 니켈 범프를 형성하기 위하여 PR Strip을 실시한 후 다시 PR Mold를 형성하였다. PR Mold 형성 후 다시 니켈 전해도 금을 실시하여 니켈 범프(bump)를 형성하였다. 제작된 탐침패드의 니켈배선의 폭은 $18.0{\mu}m$이고 피치(Pitch)는 $35{\mu}m$이며, 니켈 범프의 두께(Thickness)는 $10.0{\mu}m$로 제작되었다. 본 연구에서 제작된 탐침패드를 더욱 더 고집적화(Fine Pitch)하여 일체형 탐침 패드를 제작하게 되면 이를 사용하는 프로브유니트의 제작에 있어서 비용 절감 및 생산성(Throughput)을 크게 향상 시킬 수 있을 것이다.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.12
• /
• pp.1458-1467
• /
• 1999

VLSI 공정 기술이 발달하면서 이웃한 전선 간의 간격이 점점 더 가까워 지고 있으며, 그에 따라 인접 전선 간의 혼신 문제가 심각해지고 있다. 본 논문에서는 3층 그리드 채널 배선에 적용 가능한 혼신을 최소화시키는 배선층 할당 방법을 제안한다. 이 방법은 선형 의사 불린 최적화 기법에 맞도록 고안되었으며, 적절한 변수 선택 휴리스틱과 상한값 추정 방법을 통하여 최적의 결과를 짧은 시간 안에 찾아낸다. 실험 결과를 통하여, 일반적인 0/1 정수 선형 프로그래밍 기법과 비교하여 성능과 수행시간 면에서 우수함을 보인다. Abstract Current deep-submicron VLSI technology appears to cause crosstalk problem severe since it requires adjacent wires to be placed closer and closer. In this paper, we deal with a horizontal layer assignment problem for three layer HVH channel routing to minimize coupling capacitance, a main source of crosstalk. It is formulated in a 0/1 integer linear programming problem which is then solved by a linear pseudo boolean optimization technique. Experiments show that accurate upper bound estimation technique effectively reduces crosstalk in a reasonable amount of running times.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.7
• /
• pp.87-93
• /
• 2005

Today, the sciences in medical and nursing fields are becoming progressively more dependent on electrical apparatus for the preservation of life of hospitalized patients. Therefore, it is required more safety medical power distribution system in order to protect patients and physicians more securely from unexpected leakage of current. Especially for the medically used rooms which use life sustaining equipment power should be provided as supplying continuously without interrupting with lowest leakage current. This thesis proposed the reason why Isolation Power System is safety through the circuit analysis and applications.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.4
• /
• pp.72-77
• /
• 1984

A placement program in LSI layout is developed and the results of test are discussed in this paper. In order to achieve 100% wiring, this paper introduces, as a virtual routing method, an algorithm which is close to the real routing. This algorithm is reflected to calculate the channel density. An object function is introduced to achieve minimization of total wire length, number of cuts, and maximum channel density simultaneously. The time complexity for the proposed virtual routing algorithm is O(n2). The time required for the algorithm is very short. This algorithm represents the routing state which is close to minimum wire length. So this algorithm is very proper to the application of placement problem. An auto-placement program is developed by the use of this algorithm. The efficiency of the proposed algorithm is shown in the test of the developed program.