• Journal of the Korean Institute of Gas
• /
• v.11 no.4
• /
• pp.91-97
• /
• 2007

Recently, during the past five years, accidents of gas boiler using city gas have occurred 7.4 times more than those which use LP gas. The number of accidents has increased since the use of city gas boilers has increased. These boiler accidents resulted in 87% death from poisoning of CO, and casualty of the accidents was 4.3 times more than that of other types of accident. Hence this study makes the cause of accidents clear by separation the exhaust tube which is the cause of CO poisoning. Also, this study will establish the safety of heat-resistant silicon through testing the performance of heat-resistant silicon. The experiment showed that common silicon started hardening at $56^{\circ}C$ while the heat-resistant silicon did not begin carbonization until $606^{\circ}C$. Besides at the temperature of $150^{\circ}C$ which is the normal temperature of exhaust tube, common silicon leaked on the pneumatic test after deterioration, but the heat-resistant silicon maintained its original property. With these results, we judge that we can reduce the casualty by CO poisoning if we use the heat-resistant silicon to the connector of he exhaust tube.

• Journal of the Korean Society for Railway
• /
• v.15 no.6
• /
• pp.579-587
• /
• 2012

Shin-gumho station in Seoul underground subway have been selected to be experimentally investigated and analyzed for the real air supply & exhaust capacity compared to the original capacity of ordinary and emergency condition. The depth of Shin-gumho station is 43.6m which consists of the island-type platform ($8^{th}$ floor in underground) and a two-story lobby (first & second floor in underground). An emergency staircase connects between the platform and the lobby. Hot-wire anemometer, capture hood, wind vane & velocity meter and data acquisition systems are employed to perform the automatic measurement in this experiment. For ordinary case, air supply and exhaust capacity in the lobby were reduced by 34% and 46% compared to the original capacity, respectively. Air supply and exhaust capacity in the platform were reduced by 66% and 38%, respectively. For emergency case, air supply in the lobby was reduced by 42% and air exhaust in the platform was reduced by 28% compared to the original capacity. Therefore, air pollution in the station is expected to be worse in the ordinary environment and smoke control capability in the platform will be weakened in case of fire emergency.

• Journal of Power System Engineering
• /
• v.7 no.1
• /
• pp.14-19
• /
• 2003

A diesel engine has been widely used for ship and industry power because it has many merits of high thermal efficiency, reliability and durability. However its exhaust gas is harmful to human and air environment. Reducing the hurtful exhaust gas emissions, the study of the gas flow in the inlet and exhaust manifold is in progress in the world. In this paper we modeled the gas flow as one dimensional isentropic flow to predict the gas flow in the exhaust manifold. The method of characteristics was used for the model calculation, and the calculated results were compared with the experimental ones.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.775-780
• /
• 2003

In this study, a computer analysis has been developed for predicting the pipe pressure of the intake and exhaust manifold in a single cylinder engine. To get the boundary conditions for a numerical analysis, one dimensional and unsteady gas dynamic calculation is performed by using the MOC(Method Of Characteristic). The main numerical parameters are the variation of the exhaust pipe diameters to calculate the pulsating flow when the intake and exhaust valves are working. As the results of numerical analysis, the shapes and distributions of the exhaust pipe pressures were influenced strongly on the cylinder pressure. As the exhaust pipe diameter is decreased, the amplitude of exhaust pressure is large and the cylinder pressure was showed low in the region of intake valve opening time.

• Journal of Power System Engineering
• /
• v.8 no.1
• /
• pp.24-29
• /
• 2004

In this study, a computer analysis has been developed for predicting the pipe pressure of the intake and exhaust manifold. To obtain the boundary conditions for a numerical analysis, one dimensional and non-steady gas dynamic calculation is performed by using the MOC(Method Of Characteristic). The main numerical parameters are the variation of the engine revolution to calculate the pulsating flow which the intake and exhaust valves arc working. The comparison of exhaust pressure in case of numerical results is quite matched with in case of experimental results. When engine revaluation is increased, the pressure amplitude showed a high value, but the pressure frequency was decreased.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1666-1671
• /
• 2004

In this study, a experimental method has been introduced for the various exhaust pipe geometry of 4-stroke single engine. The main experimental parameters are the variation of exhaust pipe diameters and lengths, to measuring the pulsating flow when the intake and exhaust valves are working, As the results of experimental test, the various exhaust geometry were influenced strongly on the exhaust pressure. As the exhaust pipe diameter was decreased, the amplitude and the number of compression wave in exhaust pressure was increased. According to decreasing pipe diameter, the number of compression wave in exhaust pressure was decreased. When the pipe diameter was increase, the second amplitude was increased.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.2
• /
• pp.20-25
• /
• 2011

The purpose of this work is an experimental investigation of combustion and emission characteristics in DI diesel engine applied high EGR rate as a method of low-temperature combustion. In order to analyze the effect of EGR rate variation, a single-cylinder DI diesel engine was operated under various EGR rate conditions. In addition, injection timing was variously controlled to investigate the effect of injection timing in DI diesel engine using the cooled-EGR system. The NOx emissions were decreased in accordance with the increase of EGR rate. On the contrary, soot emissions were generally increased under applied EGR conditions. However, soot emissions were decreased in a few injection timings under high EGR rate conditions. The EGR results show that the ignition delay were increased by decreased oxygen concentrations in combustion chamber under the high EGR rate.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.9
• /
• pp.1736-1743
• /
• 1992

The combustion in the cylinder of spark ignition engine is completed after the delayed time that the liquid film fuel is vapourized as flowing into the combustion chamber. It is necessary to enhance the homogeneity of mixture and the combustion phenomenon in order to improve the heat efficiency and the emission characteristics of spark ignition engine. The main purpose of this paper is to manufacture a combustion analyzing system and examine closely the influence of non-uniformity due to the liquid film fuel flowing in the intake manifold on the combustion characteristics by using a 4 stroke multi- cylinder spark ignition engine. Moreover, with each cylinder, the interpretation of combustion characteristics by indicator diagram and the concentration of exhaust gas were investigated.

• Journal of the Korean Institute of Gas
• /
• v.19 no.6
• /
• pp.110-115
• /
• 2015

In this paper it is proposed to solve the problem of particulate matter reducing apparatus of the current DPF. One exhaust gas passage 2-way controlled to purify the exhaust gas generated during combustion efficiently. Through the control of the rotary valve within a single device, it is possible to prevent the exhaust pressure increases due to particulate matter accumulate inside the developing DPF. Develop DPF device capable of inducing a high efficiency of the output in order to improve the problem of reducing the engine output and fuel efficiency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.2A
• /
• pp.122-128
• /
• 2005

In this paper, a low noise parallel feedback oscillator for harmonic suppression and a frequency doubler are designed and implemented. As the fundamental signal of the oscillator for frequency doubling is extracted between the dielectric resonator (DR) filter and the gate device of the active device, the undesired harmonics at the output of the oscillator is remarkably suppressed. The fundamental signal of the oscillator for frequency doubling directly feeds to the frequency doubler without an additional band pass filter for harmonic suppression. The second harmonic suppression of -47.7 dBc at the oscillator output is achieved, while the fundamental suppression of -37.5 dBc at the doubler output is obtained. The phase noise characteristics are -80.3 dBc/Hz and -93.5 dBc/Hz at the offset frequency of 10 KHz and 100 KHz from the carrier, respectively.