Transactions of the Korean Society of Automotive Engineers
/
v.16
no.3
/
pp.94-101
/
2008
Since regulations of exhaust emissions are continuously reinforced, studies to reduce harmful emissions during the cold start period of SI engines have been carried out very extensively worldwide. During the cold start period, raising the temperature of cold exhaust gas is a key strategy to minimize the light-off time of three way catalysts. In this study, a synthetic gas containing a large amount of hydrogen was injected into the exhaust manifold to raise the exhaust gas temperature and to reduce harmful emissions. The authors tried to evaluate changes in exhaust gas temperature and harmful emissions through controlling the engine operating parameters such as ignition timings and lambda values. Also the authors investigated both combustion stability and reduction of harmful emissions. Experimental results showed that combustion of the synthetic gas in the exhaust manifold is a very effective way for solving the problems of harmful emissions and light-off time. The results also showed that the strategy of retarded ignition timings and increased air/fuel ratios with ESGI is effective in raising exhaust gas temperature and reducing harmful emissions. Futhermore, the results showed that engine operating parameters ought to be controlled to lambda = 1.2 and ignition timing = $0{\sim}3^{\circ}$ conditions to reduce harmful emissions effectively under stable combustion conditions.
Proceedings of the Korean Society of Propulsion Engineers Conference
/
2010.11a
/
pp.833-837
/
2010
This study aims at finding an optimal exhaust diffuser design of a high altitude testing chamber for a low bypass turbofan engine (F404-402) with thrust pound force of 17,700 and air mass flow rate of 66kg/s ejecting at a speed of Mach 1.66. The final proposed ejector size has better pressure recovery characteristics and targets to reduce operational cost at engine performance testing. Conventional high altitude test chamber layout was adopted and first drawn in two dimensions using Autocad software so as to determine the gas path, the ejector frontal size was then determined from gas dynamics equations considering traditional gas ejection method where both the engine exhaust and cell cooling air are exhausted via the ejector. Modification to a smaller ejector with an alternative secondary cell cooling exhaust port was then performed and modelled in 3D using Solid Works software.
Proceedings of the Korea Society for Energy Engineering kosee Conference
/
2006.05a
/
pp.412-419
/
2006
An Experimental study was conducted on $CO_{2}$ recycle combustion heating system using pure oxygen instead of conventional air as an oxidant, which is thereby producing a flue gas of mostly $CO_{2}$ and water vapor($H_{2}O$ and water vapor($H_{2}O$) and resulting in higher $CO_{2}$ concentration. The advantages of the system are not only the ability to control high temperatures characteristic of oxygen combustion with recycling $CO_{2}$ but also the possibility to reduce NOx emission in the flue gas. A small scale industrial reheating furnace simulator and specially designed variable flame burner were used to characterize the $CO_{2}$ recycle oxy-fuel combustion, such as the variations of furnace pressure, temperature and composition in the flue gas during recycle. It was found that $CO_{2}$ concentration in the flue gas was about 80% without $CO_{2}$recycle. The furnace temperature and pressure and pressure were decreased due to recycle and the NOx emission was also reduced to maintain under 100ppm.
Ha, Young-Cheol;Lee, Seong-Min;Kim, Bong-Gyu;Lee, Chang-Jun
Transactions of the Korean Society of Mechanical Engineers B
/
v.35
no.7
/
pp.749-755
/
2011
The performance and emission characteristics of a CNG (compressed natural gas) engine were experimentally investigated under different natural gas compositions. The engine specifications were as follows: 6606 cc, turbo, lean-burn-type; its ignition timing was fixed for the fuel gas with a HHV (higher heating value) of 10454 kcal/$Nm^3$. The experimental results showed that when the HHV of the fuel gas was changed from 10454 kcal/$Nm^3$ to 9811 kcal/$Nm^3$ and 9523 kcal/$Nm^3$, the average power reductions were 3.2 % and 3.4 % (1.5 % and 2.1 %, respectively, with A/F control switched off), respectively, and the average thermal-efficiency reductions were 1.1 % and 1.5 % (1.5 % and 2.1%, respectively, with A/F control switched off), respectively. The emissions of $CO_2$, CO, and $NO_x$ decreased as the HHV of the fuel gas was lowered. On the other hand, the emissions of THC (total hydrocarbon) were not consistent, and the extent of change in their emissions was small.
Lee, IL Kwon;Kook, Chang Ho;Ham, Sung Hoon;Lee, Young Suk;Youm, Kwang Wook;You, Chang Bae;Kim, Sung Mo;Lim, Ha Young;Ahn, Ho Cheol;Lee, Jeong Ho
Journal of the Korean Institute of Gas
/
v.22
no.2
/
pp.78-83
/
2018
The purpose of this paper is to study for failure examples of emission gas recirculation and air control and catalyzed particulate filter system in diesel engine vehicle. The first example, the researcher found the fact that the much engine oil came into the intake manifold causing diaphragm damage of EGR valve. The engine oil entered into combustion chamber of engine so that a car emit the polluted exhaust gas when driving. The second example, the researcher certified the sticking phenomenon of carbon and foreign substance with the throttle flap so that the exhaust fumes discharged exhaust port. The third example, the regeneration function don't activated to not detect the temperature of exhaust gas because of damage in the sensor. Thus, the researcher must meticulously manage his car not in order to take place the problem of environmental pollution.
This study reports the combustion characteristics, such as burner temperature and the concentration of exhausted gas ($O_2$, $CO_x$, $NO_x$) due to the different types and pitches of the fuel supply feeder of the wood pellet boiler. The 1st grade wood pellets composed of mainly larch have been used for the experiment. In case of using the spring feeder, mean temperature of burner was approximately $821.76^{\circ}C$, and the mean concentration of oxygen, carbon monoxide, carbon dioxide and nitrogen oxide were approximately 8.88%, 93.35ppm, 12.15% and 139.83 ppm, respectively. The test result with the spring feeder was shown to approach the condition of complete combustion compared to that of a screw feeder and were in good agreement with authentication judgement standard. Furthermore, the combustion efficiency was improved according to the growth of screw pitch. The control of air flow rate from the blower and ventilator is needed to achieve the complete combustion.
Proceedings of the Korean Institute of Intelligent Systems Conference
/
1997.11a
/
pp.224-227
/
1997
기존의 정속 주행시스템은 운전자가 설정하는 속도만을 유지하는 것으로, 교통량의 증가로 현재는 그 사용이 전무한 상태이다. 하지만, 심각한 교통흐름의 정체, 배기가스로 인한 환경오염 등의 문제가 최근에 대두되면서, 이러한 환경에 적절하게 적응할 수 있는 정속 주행장치의 개발이 활발하게 진행중이다. 따라서, 본 논문에서는 기존의 정속주행시스템에 Fuzzy 개념을 도입하여 좀더 안락하면서도 연료의 효율을 극대화할 수 있는 지능형 차량 정속주행 제어기를 설계, 그 성능을 평가하고자 한다. 하드웨어 구성은 기존에 사용되고 있는 cruise actuator를 이용하여 throttle valve의 각도를 제어하도록 한다. 여기서 cruise actuator를 동작시키기 위해 cruise controller로 i80c196 마이크로 콘트롤러를 사용한다.
Proceedings of the Korean Vacuum Society Conference
/
2012.08a
/
pp.300-300
/
2012
본 연구에서는 음극 아크 방전을 이용하여 빗각 증착으로 단층 또는 다층 구조를 갖는 TiN 코팅층을 제작하여 미세구조 변화가 코팅층 물성에 미치는 영향을 확인하였다. TiN 박막은 아크 소스에 장착된 99.5%의 Ti 타겟을 사용하여 아르곤과 질소 가스의 혼합가스 분위기에서 기판으로 사용된 스테인레스 강판 위에 코팅하였다. 기판과 타겟 간의 거리는 30 cm이며, 기판은 알코올과 아세톤으로 초음파 세척을 실시한 후 진공챔버에 장착하고 ${\sim}10^{-6}$Torr가지 진공배기를 실시하였다. 진공챔버가 기본 압력까지 배기되면 아르곤 가스를 주입하고 아크 소스에 약 70A의 전류를 인가하여 아크를 발생시키고 기판 홀더에 약 -400 V의 직류전압을 인가하여 약 5분간 청정을 실시 하였다. 기판의 청정이 끝나면 기판에 인가된 전압을 차단하고 질소 가스를 진공챔버에 주입하여 TiN을 코팅하였다. 빗각 증착을 위한 기판의 회전각은 $45^{\circ}$와 $-45^{\circ}$이며, TiN 박막의 총 두께는 약 $3{\mu}m$로 동일하게 유지하였다. 빗각 증착으로 TiN을 코팅하면 기울어진 주상정 구조를 갖는 박막이 제조되는 것을 확인할 수 있었다. 빗각 증착을 실시하는 중에 기판 홀더에 약 -100 V의 전압을 인가하면 빗각 효과가 사라지며 기판에 수직한 주상정이 성장한다는 사실을 확인하였다. $45^{\circ}$의 빗각으로 코팅한 단층 TiN 박막은 $0^{\circ}$로 코팅한 박막보다 경도가 감소하는 경향을 보였으나 $45^{\circ}$와 $-45^{\circ}$로 번갈아 코팅한 다층 TiN 박막은 zigzag 구조가 관찰되었으며 $0^{\circ}$로 코팅한 단층 TiN 박막보다 경도가 증가하는 경향을 보였다. 빗각으로 zigzag 구조의 다층 TiN 박막을 코팅하는 공정에서 최상층이 코팅될 때 기판 홀더에 전압을 인가해서 기판에 수직한 코팅층을 형성하면 가장 높은 경도 증가를 보였다. 본 연구에서 얻어진 결과를 이용하여 다양한 형태의 박막 구조 제어가 가능하고 이러한 미세구조 제어를 통해서 박막의 물성도 제어가 가능할 것으로 판단된다.
Journal of the korean Society of Automotive Engineers
/
v.7
no.4
/
pp.24-31
/
1985
본 논문은 Comprex압력파 과급기(Pressure-wave Supercharger;이하 PWS)의 공기 역학적인 원 리에 대해 기술하였으며, 또 기체 동력학적인 현상들이 별도의 제어장치없이도 우수한 운전성과 낮은 연료소모율, 적은 배기 배출물을 형성하는 차량들에 대해 기계적으로는 간단하면서도 완벽 한 boosting장치를 만들어 내는데 어떻게 사용될 수 있는지를 설명하였다. 근본적인 목적은 종 래의 turbo charger와 동일이지만 Comprex PWS는 현재 응용되고 있는 승용차가 요구하는 여러 가지면, 즉 1) 부하변동에 대한 충진공기압의 빠른 응답성 2) 엔진속도 전영역에 걸친 높은 boost 효과 3) 배기배출물특성을 좋게할 수 있는 배기가스 재순환(EGR)효과 등에서 종래의 것과 구별된다. 따라서 PWS의 중요한 특징들을 기술하였으며 마지막으로 최근 자동차용 Diesel Engine에의 몇 가지 예를 보았다.
Proceedings of the Korean Vacuum Society Conference
/
2011.08a
/
pp.171-171
/
2011
헬륨냉동계통은 연구용 원자로인 하나로에서 냉중성자를 생산할 수 있도록 설치된 수조내기기 내의 감속재인 수소가 정상적으로 열 사이펀을 유지하기 위한 주요 계통이다. 헬륨냉동계통은 헬륨가스를 압축하는 헬륨 압축부분과 헬륨가스를 팽창시켜 저온을 생성시키는 헬륨 팽창부분으로 나누어진다. 헬륨 압축부분은 두 개의 스크류가 맞물려 회전하면서 약 1.05 bar(a)의 헬륨가스를 최대 13 bar(a)까지 압축시키는 압축기가 있으며, 헬륨 팽창부분인 냉동박스의 팽창 터빈은 self-acting gas bearing에 의해 구동되며, 저온모드 운전 시작시 헬륨 압축부분에서 일부의 가스는 팽창 터빈 축(shaft)으로 유입되어 회전속도가 서서히 증가하면서 고속으로 회전하여 극저온의 헬륨가스(14~18 K)를 생성하는 주요 기기이다. 헬륨을 팽창하는 부분인 냉동박스 내로 헬륨 압축가스를 유입하기 전에 압축된 헬륨가스 내 불순물의 순도를 분석하여 냉동박스의 주요 부품인 팽창터빈의 운전에 영향을 미치지 않는 것이 가장 중요하다. 따라서 헬륨 저압측에 헬륨가스 내 불순물 즉, 수소($H_2$), 수분($H_2O$), 질소($N_2$), 탄화수소류(CxHy) 및 오일(Oilaerosol) 등의 함량을 분석하기위해 가스 분석기가 설치되어 있으며, 냉동박스 내로 유입되기 전에 헬륨압축에서 순환되는 가스 내 불순물인 수분, 질소, 탄화수소류 및 오일은 10 vpm 이하이어야 하며, 수소 함량은 0.1 % 이내이어야 한다. 헬륨 압축부분에서 순환되는 가스의 불순물이 요구 조건에 만족하도록 헬륨 고압측과 헬륨 저압측에 cryogenic adsorber를 설치하여 가스 내 불순물을 제거하는 가스순도제어 작업을 수행해야 한다. cryogenic adsorber를 사용하기 위해서는 장치 내의 불순 가스를 공정진공도(1.33 X $10^{-3}$ mbar) 이하로 진공배기하는 작업이 매우 중요하다. 이는 계통의 헬륨가스가 오염되지 않도록 하는 것으로 cryogenic adsorber 내에는 액체질소를 충전하여 액체질소 온도에 노출된 활성탄층을 헬륨가스가 흐르면서 수분, 질소, 탄화수소류 및 오일 등이 제거된다. 이 논문에서는 헬륨냉동계통의 가스 순도 제어 작업을 통해 헬륨가스의 순도가 요구조건 이하로 만족하며, 팽창 터빈의 운전에 영향을 미치지 않음을 기술하고자 한다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.