• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.2 s.146
• /
• pp.258-267
• /
• 2006

The present piping modeling method requires detailed inputs from a designer to generate a piping model, and thus it takes much time for the designer to perform such task. Moreover, the piping model has no relation with that of hull structure. Thus, it is time-consuming and requires much effort if design changes arise. In this study, a method that generates quickly many pipes using a pipe tray and a conversion method that converts automatically the pipes into objects related with the hull structure are proposed. A piping modeling system based on the proposed methods is developed. The applicability of the developed system is demonstrated by applying it to the generation of the piping model of a deadweight 300,000ton VLCC(Very Large Crude oil Carrier). The results show that the developed system can quickly generate the piping model in relation with the hull structure.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2010.10a
• /
• pp.308-311
• /
• 2010

본 연구에서는 유한요소해석을 통하여 나선 주름모양 소방용 파이프를 모델링하여 각 모델간의 발생응력과 변형량을 상호간에 비교 검토하여 강도 안전성이 우수한 배관시스템의 설계 최적화를 하기 위함이 연구의 목적이다.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.30 no.4
• /
• pp.33-36
• /
• 1993

본 과제는 의장설계 분야의 기본설계, 기능설계, 상세설계 및 생산설계 단계를 전산화하여 설계 생산성을 향상시키고 우수한 품질의 생산정보 및 생산관리 기초정보를 적기에 제공할 수 있는 의장설계일관시스템(Fig. 8.1)의 구축을 최종 목표로 하고 있으며, 다음과 같이 3개의 세부과제로 분담, 수행되었다. .CSDP-의장설계시스템 개발 : KRISO의장설계 일관시스템의 설계 및 관련 요소시스템의 통합 화를 위한 기반시스템의 개발'5' .CSDP-의장CAD응용기술 개발 : 현대중공업 범용 CAD시스템의 조선 전용화를 위한 의장설계 각 분야별 요구기능의 분석 및 정의'12' .CSDP-배관배치모델링기법 개발 : 대우조선 범용 CAD시스템을 토대로 한 배관설계시스템의 초기 계? 단계의 배치모델링 기법 개발'15' 본 고에서는 의장설계 일관시스템의 기본개념, 범용 CAD시스템을 중심으로한 분야별 일관시스 템의 구축을 위한 기능분석 및 기법 개발, 시스템 통합환경 구축, 그리고 향후 조선CIMS를 목 표로한 제품모델 개념의 생산지향 의장시스템 모델에 관한 개념설계 결과를 중심으로 서술하 였다.

• Journal of the Korean Institute of Gas
• /
• v.17 no.2
• /
• pp.70-77
• /
• 2013

The present study has been carried out to analyze the effect of steam hammering on the steam piping system including the final superheater, the high pressure turbine, check valve and the first reheater by sudden stoping of main stop valve in a power plant. For the present steam hammering analysis, the well known Flowmaster software has been used to model the steam piping system and the time dependent characteristics of pressure and steam mass flow rate has been conducted. Using the result of the unsteady pressure and steam mass flow rate, the forces acting on the elbows in the piping system has been derived. From the present analysis, it has been elucidated that the elbow just before the main stop valve and the elbow near the connection pipe between bypass pipe and check valve had the largest force among the elbows in the steam piping system. The structural safety diagnostics study on the elbow and the supporting structures of the steam piping system of a power plant will be conducted in the future by the present results of the forces acting on the elbow.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.11a
• /
• pp.26-26
• /
• 2004

• Journal of the Korean Institute of Gas
• /
• v.27 no.4
• /
• pp.19-26
• /
• 2023

Earthquakes are one of the most important disasters affecting underground structures. Urban gas underground pipes may cause safety problems of structures in the event of an earthquake. Since Korea began digital observation, the number of earthquakes has been steadily increasing. The seismic design standard for urban gas pipes was established in 2008, but it is difficult to estimate the impact of pipes in the event of an earthquake based on the installation of pipes. In this study, structural analysis was performed on PE (polyethylene pipe) pipes and PLP (polyethylene coated steel pipe) pipes, which are mainly used as buried pipes in Korea, according to environmental and pipe variables in the event of an earthquake. This study sought to find the variables of the most vulnerable buried pipe by modeling pipes through Computer Aided Engineering (CAE) and generating displacement on the ground. Through this study, it was confirmed that the larger the elastic modulus of the soil, the deeper the buried depth, the smaller the tube diameter, and the higher the pressure, the more PLP pipes are affected by earthquakes than PE. Based on these results, the vulnerable points of buried urban gas pipes are inferred and used for special inspections of buried pipes in the event of an earthquake.

• Journal of Power System Engineering
• /
• v.16 no.1
• /
• pp.30-37
• /
• 2012

공기 양수 펌프는 재생 에너지 분야, 부식 및 마모 특성의 유체의 활용 등 높은 신뢰성과 낮은 유지보수 비용을 필요로 하는 분야에서 그 사용이 증대되고 있다. 본 연구에서는 소형 공기 양수 펌프의 성능 평가 및 기초 데이터를 얻기 위한 연구로, D=0.012~0.019m, L=0.933m인 배관의 침수 깊이(${\beta}$=0.55,0.60,0.65,0.70)에 따른 수치해석을 수행하였다. 수치 해석 및 실험 결과는 유사성을 뛰었으며, 펌프의 사양과 효율은 공기의 질량 유속 비, 침수 깊이 비와 양수 배관의 길이에 관한 함수로 나타났다. 그리고 최대 물과 공기 질량 유속의 비는 각 배관에서 서로 다른 침수 깊이의 비로 나타났으며, 공기 양수 펌프의 최대 효율이 발생되는 운전조건은 슬러그(slug)와 슬러그 교반 정도(slug-churn flow regime)에 따라 나타남을 알 수 있었다.

• Journal of Aerospace System Engineering
• /
• v.12 no.1
• /
• pp.47-56
• /
• 2018

In this paper, the structural analysis of the Geostationary Korea Multi-Purpose Satellite-2 (GEO-KOMPSAT-2) tubing system is discussed, and the structural integrity of the tubing system is assessed by comparative analysis with the results of overseas partner AIRBUS. Securing structural reliability of the tubing system is a very important key element of the propulsion system of the GEO-KOMPSAT-2 satellite. Therefore, FE modeling of the propulsion tubing was carried out directly using the CAE program, and structural analysis was performed to evaluate the stress state under launch conditions. Hoop stress, axial stress, bending stress, and torsion stress were calculated according to diverse load conditions by using pressure stress analysis, thruster alignment analysis, sine qualification load analysis, and random qualification load analysis. From the results, the Margin of Safety (MoS) of the tubing system is evaluated, and we can verify the structural integrity of the tubing system when subjected to various launch loads.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.1060-1060
• /
• 2017

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.4
• /
• pp.367-373
• /
• 2011

Guided waves inspection techniques that are different with inspection technique by bulk waves are widely used in pipe line evaluation due to advantages of long distance inspection. However, most of pipe lines at industrial fields are buried and/or coated. In this case, due to the attenuation effect from soil and/or coating material, there are a lot of difficulty on inspection by conventional ultrasonic technique. In this paper, guided waves propagating patterns are calculated with respect to excitation mode by Normal Mode Expansion(NME). Guided waves patterns based on excited by single transducer and guided wave focusing technique have employed to analyze focusing pattern on a pipe. A longitudinal mode and high order flexural modes are used with various number of transducers to determine sensitivity. Guided waves energy excited by multi transducer with focusing algorithm was successfully focused at a desired point.