• Fire Science and Engineering
• /
• v.24 no.5
• /
• pp.50-59
• /
• 2010

Four fire scenarios, as the cases of fire sizes of 2 MW and 5 MW, and no installation and activation of atrium fire shutter for dormitory building of Daegu 'D college', were developed and fire simulations were run using FDS (ver. 5.5.0) and Pathfinder 2009 programs. By assessing fire and evacuation, the effects of atrium fire shutter and vents on the smoke control of atrium were evaluated and this study also analyzed fire hazard and egress safety for occupants in the dormitory. Fire shutter's preventing smoke transport around atrium was much effective, but smoke layer descended down the design limit of smoke height and kept about 2 m height from the atrium floor in all cases because flow rate through vents was not enough. For the case of 5 MW fire and no fire shutter, fire hazard was higher due to visibility than temperature and allowable egress time to stairwell was short less than 5 seconds for the occupants on the floors of 4F to 7F. For total occupants, egress time out of main doorway was calculated about 136 seconds. It is sure that additional systems improving the performance of smoke control need to be installed for more safe evacuation.

• 방재와보험
• /
• s.110
• /
• pp.51-54
• /
• 2005

건물의 유지보수를 위해 연소성 물질인 페인트로 겹겹이 덧칠해진 벽은 불이 번지는 연료로 작용할 뿐만 아니라 화재를 가속화시키는 위험을 안고 있다. 이러한 문제점을 해결하기 위한 방화 코팅은 화재의 확산을 막을 뿐만 아니라 화마로 부터 탈출할 시간을 벌어주며, 비용절감 측면에서도 이점을 제공하는 좋은 해결책이 될 수 있다.

• Fire Science and Engineering
• /
• v.27 no.1
• /
• pp.31-38
• /
• 2013

The pressurized smoke control system is important for fire safety in building because it is directly concerned with egress time of people. Even though the damper plays an essential role in the pressurized smoke control system, the phenomena of backflow smoke occurs for a certain the damper position. The research for a position of damper effects on distribution of air flow at the fire door is not performed. In this study, numerical simulation using FDS 5.5 was carried out to analyze the effect of the position of damper on flow distribution at the fire door. To simulate real situation, effects of opening and closing of fire door was considered. As a result, when HRR was between 200 kW and 400 kW, in the case which the damper was on the opposite wall of the fire door, the back flow to the vestibules was large compared to the two other cases of damper position. But when HRR was above 400 kW, Effect on damper position was not occurred.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.3
• /
• pp.342-348
• /
• 2014

Onshore great fires can normally be extinguished by firefighters using special firefighting equipment and its suitable method. However, offshore fires on the ships are to be extinguished by the crew without any supports from the onshore. Also, crews working on board are exposed to high risk of emergency evacuation due to the complicated structure arrangement of the ships and different accident types such as fire and ship collisions. As most of damage and loss of life in fire are associated with suffocation, shortening of evacuation time is an important factor to improve a survival rate. In this study, visibility in the accommodation area is analyzed by using the temperature and smoke flow which are obtained by the Fire Dynamic Simulator(FDS) as a Three-Dimensional Fire Analysis program to understand the survival rate of the crew upon the fire. The fire doors for most of ships are designed to close automatically when the fire alarm is activated. These automatic closing of the fire doors is a very effective system to delay the spread of flame and smoke flow for the unmanned spaces of the fire protected area. However, if the crew cannot escape within the estimated time, the crew inside the fire protected area will be damaged a lot. In this paper, the comparative analysis between the evacuations by using the fire door from the fire protected area and the suggested fire shielding structure in this study is carried out by the smoke flow rate and the temperature rise rate.

• Journal of the Society of Disaster Information
• /
• v.18 no.1
• /
• pp.38-50
• /
• 2022

Purpose: The goal of this research is to create a numerical analytic database that may assist fire prevention managers and building officials in prioritizing items that need to be addressed in order to improve evacuation safety performance while working within a constrained budget and time frame. Method: It was carried out utilizing the CFD Tool, a quantitative evaluation approach, to assess evacuation safety. One direct staircase-type apartment houses and one corridor-type apartment were chosen to make it. Result: In the fire compartment category, Apartment A's evacuation time was around 130 percent longer than that of sprinkler facilities. Conclusion: Fire prevention managers and building officials feel that starting with a single level and implementing "dwelling unit separations" will increase evacuation safety, and that maintaining fire compartments and sprinkler systems at all times will be effective. Because of the limited characteristics of smoke propagation in corridor-type apartments compared to direct staircase-type flats, it is thought that fire extinguishing equipment should be addressed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.908-911
• /
• 2003

In this study, the security system (Firewall and IDS) was installed in high speed information network and analyzed for a change in the speed of data transfer and the possibility of invasion. The selection of appropriate system, efficient detection and protection and surveillance method were suggested and analyzed. In order to do experiments, an experimental model was comprized to analyze the parameters that was affected by the detection and protection system in network. This will give a standard how much we can pull up the security system maintaining the network speed.

• Annual Conference of KIPS
• /
• 2004.05a
• /
• pp.1095-1098
• /
• 2004

IP VPN의 사용은 현재 보편화 되었고 네트워크 장비의 통합 추세에 따라 IP VPN과 방화벽 통합제품의 생산이 활발히 이루어지고 있다. 통합 보안 제품은 비용 효율성과 관리의 편리성, 확장성, 유연성과 같은 장점을 제공하지만 높은 성능 지원을 요구한다. 방화벽의 성능 인자의 하나로서 정책의 개수는 그 수에 비례하여 검색 시간이 지연되는 문제를 발생시키고, 이러한 성능 저하 문제는 VPN과 통합 시 더욱 가중된다. 더욱이 차세대 네트워크인 IPv6로 환경에서는 IP의 비트수가 증가하여 검색 성능 문제 해결이 필수적으로 요구된다. 본 논문에서는 이러한 통합 제품의 검색 성능 문제에 관한 해결 방안으로 IPv6 주소의 특성을 사용한 메커니즘을 제안한다. 제시한 메커니즘은 보안 정책 테이블의 주소 필드를 IPv6 주소에 포함된 인터페이스 식별자로 대체하여 보안 정책 테이블의 검색 속도를 향상시키는 방법이다. 이 방법은 차세대 네트워크 환경에서 주목 되고 있는 보안 및 성능 문제에 대해 큰 역할을 할 것으로 기대된다.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.11a
• /
• pp.103-106
• /
• 2011

국토해양부령 제320호인 건축물의 피난 방화구조 등의 기준에 관한 규칙 제 3조에서는 내화구조에 관한 세부기준을 정하고 있다. 이러한 법정내화구조 중에서 철골철망 모르타르조의 피복두께에 따른 내화성능 변화를 분석하기 위하여, 본 연구에서는 고온 재하하중조건에서 내화실험을 수행하였다. 철골조의 피복두께를 50 mm ${\cdot}$ 60 mm ${\cdot}$ 70 mm로 변화하여 내화실험을 수행하였으며, 재하하중비를 변화시킴으로 동일 피복두께에서의 내화성능 변화를 분석하고자 하였다. 실험결과 단면소성모멘트 대비 하중비 0.4 조건에서의 철골철망 모르타르조의 내화성능은 180분이 나왔으며, 피난 방화구조 등의 기준의 별표 1에서 정하고 있는 내화구조의 성능기준 중 최대 내화성능시간인 3시간을 확보하는 것으로 나타났다.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.4
• /
• pp.442-450
• /
• 2012

In this study, fire resistance and residual strength were examined after the addition of PF fiber and bonding fireproofing gypsum board to a high strength concrete-model column of 50 MPa grade. At the beginning of the experiment, all the properties of base concrete appeared to satisfy the target range. In terms of the internal temperature record, a trend of slightly high temperature was shown when the fireproofing gypsum board was not bonding, and when the fireproofing gypsum board was bonding, as PF content increased gradually, the temperature was gradually lowered. In terms of the relationship, as time elapsed a low temperature was shown when fiber was mixed, and when the board was bonding, the trend of lower temperature could be confirmed. Meanwhile, in terms of spalling property, a severe explosive fracture was generated at PF 0%, and falling off was prevented as the fiber content was increased; however, discoloration and a multitude of cracks were discovered, and when the board was bonding, the trend in which the exterior became satisfactory when the content was increased emerged. In terms of the residual compressive strength, measuring of strength could not be performed at PF 0% without bonding of board, and the strength was increased as the fiber content was increased; however, there was a decrease in strength of about 30 ~ 40%, and in the case of PF 0% with the bonding of board, the strength could be measured; however, about an 80% decrease in strength was shown, and only about a 10 ~ 20% decline in strength was displayed, as the range of decrease was reduced as the fiber content was increased. Considering all of these factors, it was determined that a more efficient enhancement of fire resistance was obtained when two methods are applied in combination rather than when the PF fiber content and bonding of fireproofing gypsum board are utilized individually.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.11a
• /
• pp.23-26
• /
• 2011

U-러닝은 유비쿼터스러닝(Ubiquitous Learning)의 약자로 개방적 학습자원을 학습자의 필요에 따른 선택에 의해 활용하는 통합적 학습체제 의미한다. 국내에서의 소방교육은 다양한 소방교육 컨텐츠부족 및 시간적 공간적 제약으로 인해 소방안전에 대한 교육이 원활히 이루어지지 못하고 있는 실정이다. U-Learning 구성하여 다양한 컨텐츠를 거주자, 근무자, 방화관리자에게 제공하여 자기주도적인 학습을 통해 평상시 거주자 및 근무자에게 소방시설의 이해 및 사용방법을 교육하고, 방화관리자에게는 소방시설의 관리 및 점검방법을 교육함으로써 화재 및 재난으로 인한 피해를 최소화 할 수 있다.