• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.477-482
• /
• 2002

This research is concerned with the study of an active vibration absorber using piezoelectric actuators and Isolation pad. The active isolation system consists of 4-pairs of PZT actuators bonded on the surface of an aluminum plate and a passive damping material. The active system is connected to the passive system in series. The Signals of the accelerometers are fed into the PZT actuator through the controller. We proposed a new control technique which can deal with the shock as well as the base excitation in this study. The Positive Acceleration Feedback(PAE) tuned to the natural frequency of the vibration isolation system is used to suppress the vibrations caused by the shock using the top accelerometer signal. The Negative Acceleration Feedback (NAF) based on the base acceleration signal is used to counteract the base motion. Experimental results show that the proposed active vibration isolation system can suppress vibrations.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.519-519
• /
• 2012

유도 결합 플라즈마에서 안테나 전류의 측정을 통해 시스템 저항을 계산하여 플라즈마 소비 전력을 구하는 기존의 방법은 정밀한 전류 측정의 한계를 가지고 있다. 본 연구에서는 유도 결합 방전 시스템에서 정합회로와 코일 사이에 설치된 전류 측정 장치를 사용하여 방전된 상태에서의 인가한 전력에 따른 코일 전류를 측정하였고, 방전되지 않은 상태에서 방전되었을 때와 같은 전류를 흐르게 인가 전력을 조절하였다. 이때의 측정값이 시스템이 소비하는 전력이라고 할 수 있다. 결과적으로 기존의 시스템 저항의 오차를 고려하지 않기 때문에 개선된 소비 전력값을 좀 더 용이하게 구할 수 있었다.

• Journal of the korean Society of Automotive Engineers
• /
• v.9 no.2
• /
• pp.17-27
• /
• 1987

최근 자동차기술의 발달로 인한 차량의 경량화, 고급화 추세는 더욱 개선된 승차감을 요구하고 있다. 승차감에 영향을 미치는 주요인으로서는 엔진의 진동과 소음, 변속장치, 구동축 등의 구동 계통의 진동 및 소음, 그리고 노면으로부터의 진동, 외부 공기의 흐름에 의한 소음 등 여러가지가 있다. 엔진지지계는 이중 엔진의 진동 및 소음을 절연하는 기능을 맡고 있고 동시에 엔진하중의 지지, 변위제한, 충격흡수 등의 기능도 가지고 있다. 실제에 있어서 엔진지지계는 진동 및 소음 절연의 기능 외에 다른 기능도 갖고 있으나 이중 가장 어렵고 해석이 곤란한 것은 결국 진동절 연성능이라고 할 수 있다. 그러나 여러 가지 제약조건이 있으므로 최적의 진동절연특성의 실 현이 항상 가능한 것은 아니고 방진고무의 특성치난 지지각도 등의 어느 범위안에서만 선택이 가능하므로 실제 설계에 있어서는 적용상의 특정조건을 만족시키는 초기설계치를 정하여 그때의 진동절연특성을 평가하고 기준이하일때는 설계치를 재조정하여 다시 평가하는 접근방식이 실질 적이다. 따라서 이 설계과정에 필요한 엔진지지계의 진동절연특성해석 및 평가용 컴퓨터 프로 그램을 개발하였으며 그 해석치와 실험결과를 비교하여 타당성을 입증하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.11a
• /
• pp.1203-1204
• /
• 2014

세탁기에서 등속 원운동(uniform circular motion)시 발생하는 힘으로 인해 생기는 소음 및 진동을 트라이포드 수평계(tripod water level)의 자동 수평맞춤 센서 장치, 방진고무(vibration proof rubber)를 장착한 최적의 진동흡수 평판 기구를 설계 하고자 한다. 본 연구의 결과는 세탁기 소음으로 인한 층간소음 문제 해결에 기여 할 것이다.

• Journal of KSNVE
• /
• v.5 no.3
• /
• pp.413-421
• /
• 1995

Synchrotron light source building of the accelerator has stringent vibration limits since the performance of the optical devices and electronic equipments in the laboratory is strongly influenced by the vibrations of the building. In this study, vibrations of the synchrotron light source building are estimated using experimental modal analysis and force response simulation technique. Dynamic properties of the building are identified from the modal parameters and vibration responses are predicted from the force response simulation. A double anti vibration system is designed and applied to the HVAC equipments and it has been shown that the measured vibrations of the building with the double anti vibration system satisfy the vibration criteria.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1373-1378
• /
• 2000

Vibration caused by railroad vehicle including subway train running raises a lot of problems to the neighboring buildings. Therefore lots of methods to isolate the railway vibration have been studied and practically applied to sites. As one of them, specially designed vibration isolation device was installed in the some section of Seoul subway. This device is installed between the rail and track slab. Because the process of installation is relatively simple, this method can be applied to the existing railways in servicing. We measured the vibration and noise to check the effectiveness of this device before and after the installation. The result showed that the vibration level of the slab and platform was reduced to 7 - 10 dB. Expecially high frequency component was reduced to a large amount. From this result, we can conclude that these kind of devices are useful to the reduction of the railroad vibration, expecially the high frequency vibration which can cause structure born noise.

• The Journal of Korea Robotics Society
• /
• v.14 no.2
• /
• pp.131-138
• /
• 2019

In this study, we developed an FSEA(Force-sensing Series Elastic Actuator) composed of a spring and an actuator has been developed to compensate for external disturbance forced. The FSEA has a simple structure in which the spring and the actuator are connected in series, and the external force can be easily measured through the displacement of the spring. And the characteristic of the spring absorbs the shock to the small disturbance and increases the sense of stability. It is designed and constructed to control the stiffness of such springs more flexibly according to the situation. The conventional FSEA uses a fixed stiffness spring and the actuator is not compensated properly when it receives large or small external force. Through this experiment, it is confirmed that FSEA compensates the external force through the proposed algorithm that the variable stiffness compensates well for large and small external forces.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.1
• /
• pp.1-8
• /
• 2005

Multi-beam echo sounder is more precise and efficient than single beam echo sounder relatively because it is able to survey a wide area with 3 times or 4 times swath width as much as the depth of water using multi-beam echo sounder. It is sure to be needed to control supplementary equipment accurately, however, because the principle of creation and measurement of the beam is elaborate and influenced a great deal by vessel's motion. We analyzed using visual and statistical methods in both sections of the depth of water where were the places of the center of the beam and ± 45° angles from the central beam to improve the precise of Multi-beam echo sounder in this study. In result, it was required to control supplementary equipment because of errors from the vibration of an inertia governor and misalignment of extra units. Therefore, we reduced the vibration from the vessel's engine by sticking rubbers to the inertia governor and measured the offset values of extra units accurately, converted them to the values of horizontal position and lined up. In result, the precise in sounding the depth at the place of ± 45° from the center of the beam was improved from the level of the 1st order to the special order in a hydrographic survey of the IHO S44 standards and a phenomenon of ripple patterns in the overlapped area by misalignment was decreased remarkably.

• Journal of the Korean Society for Precision Engineering
• /
• v.3 no.2
• /
• pp.62-75
• /
• 1986

An experimental investigation of the machining characteristics such as cutt- ing resistance, surface roughness and tool wear in turning the test pieces of SM45C steel with both coated and uncoated carbide tool tips under various cutting conditions was conducted. Also a specially designed simple vibration damping device was experimentally evaluated for its effectiveness on machined surface roughness and a vibration test was conducted to confirm its ability to reduce the amplitude. Based on these tests finding, the following conclusions are made; 1. The cutting resistance($\textrm{p}_{1}$) increases as the depth of cut(d) increases at fixed feed rate(f) over the cutting speed(v) range of 43-226 m/min and p decreses about 18% average when V is increased for fixed d and f. At V= 226m/min, $\textrm{p}_{1}$/for A, C tips are about the same level but $\textrm{p}_{1}$ for B tip is 15% less than A, C tips. 2. The specific cutting resistance(Ks) at V=226 m/min was derived for A, B, C tips respectively and the value of Ks for B rip is about 20% less than A, C tips. 3. The surface roughness(Ra) improves significantly as the cutting speed(V) is increased and this effect was greater when V>100 m/min. On the other hand, Ra deteriorates as the feed rate(f) is increased and this trend was accelerated when f>0.3 mm/rev. With regard to the difference of Ra values among A, B, C tips, at V=226m/min, d=0.4mm, and f=0.31-0.61mm/rev, Ra values for B.C tips are about 17% less than tip A. 4. The experimental tool wear equations were derived for A, B, C tips and from these equations, the tool life($\textrm{T}_{\textrm{L}}$) baced on the I.S.O. criteria was calculated to be $\textrm{T}_{\textrm{L}}$<$\textrm{T}_{\textrm{LB}}$<$\textrm{T}_{\textrm{LC}}$ for both flank wear($\textrm{V}_{\textrm{B}}$) and boundary wear($\textrm{V}_{\textrm{N}}$). Hence, the coated tips are superior to the uncoated tip and tip C is considered to be the best. 5. The cutting resistance may be slightly reduced and the surface rounghness improved when the damper is used especially when V>100 m/min. Therefore this damping device is considered to be effective and practical. The experimental surface roughness equations were also derived. Based on the vibration test, it is established that the surface roughness improvement was the result of amplitude reduction made possible by the damper.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05b
• /
• pp.102-105
• /
• 2005

가스센서는 응용 분야와 기능 및 종류가 다양하고 최첨단 분야로서 학문적으로는 물리, 화학, 전기, 전자 및 기계 등의 배경을 필요로 하며 산업적으로는 공업 전 분야와 농림, 축산, 사무기기에서 뿐만 아니라 공해 방진용(자동차 연소제어 및 배출가스 제어, 대기오염 감시등), 민생용(조리, 환기, 공조 등), 교통 보안용(음주운전측정 및 음주운전 방지장치 등), 방재용(가스 누설 탐지기, 불완전 연소 방지, 산소 결핍, 화재 등), 의료용(호기, 마취가스의 분석 등) 매우 광범위하며 점점 더 확대되어 가고 있다. 본 연구에서는 검출 가스 종류에 따라 졸-겔법으로 감응막을 최적 설계하고, 최적으로 설계된 감응막을 디핑법으로 코팅처리한 후 최적으로 열처리하여 센서를 제작하였다. 또한, 자체 제작한 가스검출 시스템에 제작된 센서를 장착하여 센서의 가스 검출 특성을 측정하고, 측정 데이터를 이용하여 휴대용 가스 검출 시스템을 설계 제작하였다.