• Journal of the Korean GEO-environmental Society
• /
• v.11 no.12
• /
• pp.47-56
• /
• 2010

The construction of new roads and the consistent extension of already-existing roads or the line-shape revision of those roads are increased with the governmental investment to SOC facilities currently. Accordingly, the road cut slopes are in the trend of rapidly increasing. As the road slope has increased, a lot of human and property damages has entailed consequently and in the local case, numerous studies have carried out aiming at minimizing this damages caused by the rockfall and landslide. In general, standard falling rock prevention facility has employed for most of the local road slope based on "Guide for Installation and Management of Road Safety Facilities" published by MLTM(the Ministry of Land, Transport, and Maritime Affairs) but profound doubt has raised as to whether this rockfall prevention facility would function properly enough to prevent rockfall efficiently without any damages in case of actual occurrence of rockfall. In addition, it is a reality that in most cases, such work is relied on overseas technology as a whole as the local technical level is low and in case of rockfall prevention net, it is judged that a study on rockfall prevention net that is able to endure more powerful rockfall energy is required as the problem including net bursting is taken place as a result of enough bearing force being failed to be demonstrated due to its partial weak point(not uniformly made). Under this background, in this study, three kinds of model depending on mesh size of expanded metal that is considered to have an adoptability as rockfall prevention net, as target are selected and characteristics depending on mesh size of expanded metal is intended to be researched through a pull-out test performance by using pull-out test equipment rockfall prevention net.

• Korean Journal of Food Science and Technology
• /
• v.50 no.3
• /
• pp.286-291
• /
• 2018

This study aimed to investigate the antioxidant ability of a cumin seeds ethanol extract (CE). The DPPH and ABTS radical scavenging activities of 0.25, 0.5, and 1.0 mg/mL of CE were found to be 24.6, 41.4, and 73.4 and 14.5, 27.2, and 50.1%, respectively (p<0.05), suggesting a dose-dependent effect. Moreover, the total phenolic content of CE was $61.0{\mu}M$ tannic acid equivalent/g extract and the FRAP value was $429{\mu}M$ ascorbic acid equivalent/g extract. In 9 hours of oil oxidation, CDA and ${\rho}-AV$ was significantly reduced to 13.4 and 59.1%, respectively, at a CE concentration of 100 ppm compared with that in the control (p<0.05). Major volatile compounds of CE were found to be ${\alpha}$-pinene, 2-butenal, cyclohexene, ${\beta}$-pinene, cis-sabinene, ${\rho}$-cymene, and limonene. These results suggest that CE containing volatile compounds has excellent antioxidant ability and oxidation stability, and thus could be used as a natural antioxidant to prevent oxidation in lipid foods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.272-277
• /
• 2019

In this paper, a manufacturing method of an anti-glare cover glass on LCD for outdoor use is proposed. The main specification of cover glass is hardness and anti-glare. Hardness is achieved by using the tempered glass, and anti-glare(AG) film is laminated to meet anti-glare specification no the tempered glass. However, the AG film is difficult to maintain the AG performance continuously because the abrasion resistance of the PET film itself is as weak as about 3H. Therefore, a novel production procedure using screen printing method is proposed. The proposed coating is implemented by applying $ZnO-B_2O_3-SiO_2$ powder on glass surface and the glass is made with enhanced hardness through tempering process. In order to apply the ZBS powder uniformly on the glass surface, a screen printing process is used. The main parameters to be considered in screen printing are the oil concentration and mesh opening size. Because the amount of ZBS powder applied to the printing process is controlled by these two parameters, the correlativity is confirmed through the experiments. In order to evaluate the performance of the proposed method, the haze, surface roughness and transmittance are selected as the performance index and are compared with the AG film. As a result of comparison, it is verified that the transmittance of the proposed tempered glass is 83.1%, which is slightly lower than 89.5% of AG film, but the hardness is more than double to 7H.

• Aerospace Engineering and Technology
• /
• v.9 no.2
• /
• pp.168-175
• /
• 2010

During feeding oxidizer to the engine, vortices are occurred at lower dome of oxidizer tank inside by various working environments and external forces for liquid propellant feeding system of space launch vehicle. To eliminate the vortices or swirls Anti-Vortex Devices(AVD) shall be installed at inside lower oxidizer tank. Using the numerical analysis, we have confirmed the performance of AVD and analyzed the mass flow rate by feeding time and magnitudes of swirls on the free surface of oxidizer or exit surface according to the AVD number and length. Then we could derive the optimal design of the AVD number and length.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2007.02a
• /
• pp.97-100
• /
• 2007

본 논문은 유비쿼터스 센서 네트워크와 텔레매틱스 서비스에 사용되는 무선 환경 프로토콜 표준 중 UHF 대역 프로토콜인 EPCglobal의 Class 1 Gen 1, Class 1 Gen 2의 에어인터페이스를 분석하고 각 프로토콜에서 규정된 충돌방지 알고리즘을 구현하였다. 그리고 각 프로토콜에서 규정하는 충돌방지 알고리즘의 성능을 개선한 알고리즘을 제안하고 성능을 비교하였다. 개선된 알고리즘과 표준 알고리즘의 성능 시뮬레이션 결과 개선된 Class 1 Gen 1 알고리즘은 태그 수 100개 일 때 54.5%, 태그 수 1000개 일 때 63.4% 감소하였다. 개선된 Class 1 Gen 2 알고리즘은 태그 수 100개 일 때 7.9%, 태그 수 1000개 일 때 11.7% 감소하였다. 개선된 충돌방지 알고리즘은 표준 알고리즘보다 태그 인식 성능이 상당히 개선됨을 알 수 있다. 따라서 개선된 충돌방지 알고리즘은 유비쿼터스 센서 네트워크와 텔레매틱스 서비스 등에 사용되는 무선인식 시스템의 성능 개선방안으로 적용될 수 있다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.718-722
• /
• 2009

하도 상황이 수역(水域)에서 식생역(植生域)으로 변화하여 최종적으로 육역화(陸域化)단계로의 천이가 진행되는 현상을 하도 육역화라고 한다. 하도 육역화는 하천의 생태환경적 측면에서 많은 문제들을 야기할 수 있으며, 단일 단면 하도의 복단면 고착화로 하천 통수 단면이 감소하여 하도의 홍수 관리 기능에 심각한 위해 요소로 작용할 수 있다. 본 연구는 하도 육역화 방지를 위한 수공구조물로서 말뚝을 설치하고 그 효과를 3차원 수치모형인 FLOW-3D를 이용하여 검토하였다. 수치 모의는 구조물 주변의 복잡한 흐름 모의를 위하여 복잡한 지형지물이 있는 경우에 많이 활용되는 LES(Large Eddy Simulation) 난류 모델을 적용하였으며 세굴 및 퇴적 영향을 알아보기 위하여 유사 세굴(Sediment Scour) 모델을 적용하였다. 하도 육역화 방지 수공구조물의 효과 검토를 위하여 모형 수로의 제방 근처에 말뚝을 설치하고 말뚝직경, 설치 간격 및 배열 등을 변화시켜 구조물 주변의 동수역학적 거동, 흐름분리 효과 및 세굴영향을 수치모의를 통하여 분석하였다. 분석 결과 말뚝에 의한 흐름 분리와 국부 세굴에 의하여 하상 퇴적이 상대적으로 감소되는 효과를 나타냈으며 설치간격이 수변으로부터 말뚝 두께의 2배 그리고 흐름방향으로 말뚝 두께의 2배 이내의 간격으로 설치하여야 더욱 효과적인 것으로 나타났다. 추후 다양한 수리모형 실험을 통한 검증과 다양한 조건에 대한 수치 모의를 통하여 하도 육역화 방지 기술을 개발할 수 있을 것으로 사료된다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3A
• /
• pp.184-194
• /
• 2005

One of the most important factors that decide the overall performance of RFID system is anti-collision algorithm. By enhancing the anti-collision algorithm, we can increase the number of RFID tags that can be processed in unit time. Two anti-collision algorithms are most widely prevailed: one is ALOHA-based protocol and the other is a binary tree walking method, but these are still under research. In this paper, we suggest an anti-collision algorithm named AAC(Address Allocating and Calling) using pre-distributed random address, which is much faster and more efficient than existing ones. Finally, we evaluate our scheme using mathematical analysis and computer simulation.

• The Journal of the Korea Contents Association
• /
• v.5 no.1
• /
• pp.157-167
• /
• 2005

In this paper, we propose a new phantom protection method for multi-dimensional index structures. The proposed method uses a hybrid approach of predicate locking and granular locking mechanisms. The proposed mechanism is independent of the types of multi-dimensional index structures, i.e., it can be applied to all types of index structures such as tree-based, file-based and hash-based index structures. Also, it achieves low development cost and high concurrency with low lock overhead. It is shown through various experiments that the proposed method outperforms existing phantom protection methods for multi-dimensional index structures.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.4
• /
• pp.1449-1457
• /
• 2010

The intrusion prevention system solution is receiving the spotlight as the next generation security system. It is anticipated that the system will form a very active security market both domestically and overseas. Moreover, quality evaluation proving successful inspection of merchandises is required of domestic businesses seeking to operate in the international market, and general users also prefer those that have successfully passed inspection. This study has constructed a security quality evaluation model for intrusion prevention system by deriving and analyzing security quality evaluation items required by an intrusion prevention system solution and by classifying them in detail. The derived quality evaluation model will play an important role of assessing and improving the quality of intrusion prevention system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.6
• /
• pp.1107-1113
• /
• 2015

The number of phishing/pharming attacks occurring has increased and consequently, the number of studies on anti-phishing/pharming has also increased. The target sites of phishing/pharming are financial sites, and these have a low connection rate compared to those of portal sites. In this paper, we propose an anti-phishing/pharming method that uses a portal site as a stopover. The proposed method is based on the reliability of portal sites. This method is intended for general users rather than for professional users or developers. We also analyze the safety of the proposed method by separating the method into sub components of module safety assumption.