• Explosives and Blasting
• /
• v.20 no.4
• /
• pp.5-15
• /
• 2002

For the noise reduction measures in a construction field where noise sources such as blasting and pile driving works exist, the construction of the sound barrier near the noise source or receiver is often the most economic measure in order to exclude the propagated sound. The dimension of the barrier is decided by the noise and construction design, and the constructive quality of a soundproof panel shall be secured in accordance with KS F4770 to guarantee the safety of sound barriers. In this paper the problems included in the KS F4770-1 that is the regulation for the metallic sound barrier of the absorption type are identified and it is suggested what to be corrected or improved. Through a series of the analyses, conclusion were reached that it is required to improve test methods in KS F4770-1 as well as to break down loads for building more cost-effective sound barrier. In addition, KS F4770-1 was compared with ZTV-Lsw 88 which is the german regulation for sound barrier design. As a result, it was found that the Korean regulation is more conservative than that of Germany.

• Journal of KSNVE
• /
• v.12 no.6
• /
• pp.414-422
• /
• 2002

도로와 인접지역 사이에 장애물이 없으면, 소리는 소음원에서 수음영역으로 직접적으로 전달된다. 그러나 소음원과 수음영역 사이에 장애물이 있는 경우에는 소음원에서 발생한 소음은 장애물의 상단을 회절하여 수음영역으로 도달하는 회절경로와 장애물 자체를 통과하여 전달되는 투과경로, 장애물에 의한 반사경로 등 여러 전파 경로로 나뉘어 전달된다. 그러나 일반적인 방음벽은 벽 재료의 투과손실을 크게 하므로 회절감쇠 이외의 영향은 거의 없게 설계된다. 따라서 방음벽에 의한 소음 감쇠량은 방음벽의 높이(회절음의 영향)에 의해 결정되는 회절감쇠가 대부분을 차지하게 된다.(중략)

• Journal of KSNVE
• /
• v.3 no.3
• /
• pp.202-208
• /
• 1993

도시 주거지의 소음은 주로 자동차와 철도 등에 의한 교통소음이 주류를 이룬다. 저소음 차량 개발 등 국가적 차원의 노력은 차량소음을 줄이는 원천적이고 장기적 대책이 되겠지만 방음벽의 설치가 현실적으로는 최선의 방법이 될 수 있다. 이러한 제반 여건을 감안하여 대전시 중촌동 일원에 새로 건설되는 고가도로 구간의 인근에 거주하는 사람들의 소음대책을 위해 도로교통 소음 및 철도소음에 대한 영향을 컴퓨터 시뮬레이션 기법을 이용하여 예측하였으며, 이 결과에 따라 방음벽을 설치하였다. 또한 방음벽 설치시 주민의 여론을 수렴하여 방음벽은 투명방음판과 흡음형 방음판을 조합하여 설치하였다. 교통소음에 대한 컴퓨터 예측결과에 따라 설치된 방음벽에 대한 효과는 방음벽이 설치된 후 실측을 통하여 상호 비교하고 주민의 반응에 대해서도 알아보았다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1990.10a
• /
• pp.99-103
• /
• 1990

도로망의 확충과 교통량의 급속한 증가에 따른 교통소음 증가는 연도주민에 게 생활방해를 심화시키고 있다. 이를 저감시키기 위한 방지대책의 일환으로 전파경로상에 방음벽이 설치되고 있으나, 이의 설치부서가 서로 다르고, 또 한 소음피해지역 주민의 공간분포와 도로구조 및 교통특성등을 정량화하여 종합적으로 반영하지 않고 설계.시공하고 있어 방음벽 효과를 크게 기대할 수 없는 실정이다. 따라서 본고에서는 방음벽의 효과를 제고하고 규격의 통 일성을 기할 수 있는 방안 등에 관하여 살펴보고자 한다.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.4
• /
• pp.232-238
• /
• 2012

In this study, the noise mapping simulation is executed to design an effective barrier reducing noise levels of a school site. The geographical features of the ambient site and the school buildings are modelled in detail in order to consider sound propagation, deflection, and absorption phenomena etc. The main sound source, sound power level of expressway, is estimated on the basis of measured noise levels at several points of the site. The noise mapping simulation is performed by using ENPro, environmental noise prediction program based on ISO 9613 to analysis the effectiveness of noise barrier. Consequently, the noise barrier is designed to meet an environmental noise standard and satisfy low cost and safety conditions.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.758-761
• /
• 2005

본 연구에서는 고속도로 발생 소음특성을 측정하여 방음벽 설계 인자를 도출하기 위함이다. 이를 위해 인터체인지 및 영업소 인접부를 포함한 총 20개소를 선정하여 소음측정을 수행하였으며, 소음원의 주파수특성 및 일일 변동특성, 노면 종류에 따른 소음발생특성, 영업소 및 인터체인지 부근에서의 소음특성을 분석하여 방음벽 설계 인자를 도출하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.939-942
• /
• 2014

고속도로 교통 소음 저감을 위해 상용소음예측프로그램인 SoundPLAN과 소음예측 시 주로 사용하는 도로 교통 소음예측식인 RLS-90을 이용하여 경제적이고 효율적인 방음대책 설계방안에 대한 연구를 하였다. 대상지역에서 측정한 실제 소음도와 예측 소음도의 차이를 비교하여 모델을 검증하고 장래교통량에 대하여 소음을 예측하여 방음대책을 설계하였다. 방음벽의 높이와 길이, 저소음 포장의 길이를 조절하고 저소음 포장과 방음벽을 혼용했을 경우에 대하여 소음규제 기준에 적합하게 설계하였고 각각의 설치 단가를 이용하여 경제성을 비교하여 보다 효율적인 방음대책을 알아보았다.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.3
• /
• pp.223-233
• /
• 2016

Design of a vegetation type sound barrier was presented as a noise barrier on the boundary of neighborhood facilities including schools, and apartments. The suggested noise barrier is made of unit blocks that are to be formed by stacking over the wall structure containing the plant and soils in the blocks. The advantage of the vegetation noise barrier is to acquire not only sound absorptive effects of plants and soils, but also sound diffusive effect caused by the irregular surface of the barrier which could eventually mitigate the noise. First, the optimum size of the units to obtain the highest noise reduction was investigated using 1/10 scaled model experiment, and sound attenuation experiments were carried out using a 1/2 mock-up model which is 2 m high and 5 m long. Total 1,137 unit blocks were made of synthetic woods with the size of $10{\times}10{\times}9cm$. These unit blocks were installed on the both side of the 1/2 mock-up steel framed noise barrier. As a result, it was revealed that the block typed vegetation noise barrier has 7 dB higher insertion loss in comparison with the general plane noise barrier. Also, it was found that the appropriate size of unit blocks is $20{\times}20cm$ which has large effect of sound insertion loss.

• Spatial Information Research
• /
• v.23 no.5
• /
• pp.75-85
• /
• 2015

Recently deformed or destroyed of soundproof wall by local winds and typhoon has increased. This research proposed the estimation method of the design wind load of soundproof wall using spatial information analysis based on 1:5,000 digital map and performed comparative analysis with actual application cases. According to the result of quantitative evaluation using GIS, the surface roughness in the downtown area packed with buildings was III and the surface roughness in the suburban district with a relatively small number of buildings was II and the surface roughness in the district packed with open areas and typical farmhouses was I. This shows that the wind load of the soundproof walls reflecting the actual surface conditions was estimated. If the quantitative GIS analysis presented in this study is applied to wind-resistant design of soundproof walls, it is supposed that this will be helpful in more rational wind-resistant design by remedying the existing problem in which the wind load varies depending on designer's subjectivity.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.12
• /
• pp.847-854
• /
• 2012

The demand for noise barriers and necessity for the installation are highly growing because residential areas have become diverse and locational priority is changed to consider how to approach highway easily. However, public annoyance to the noise generated from highway is continued despite lots of noise barrier are installed. Moreover, there are growing concerns to maintain noise barriers to be free from losing transparency, dust stack, and shock fracture. To resolve these issues, it is suggested to develop new polymer materials and conceptually new noise barrier. In this study, as a first step to develop a new noise barrier to overcome current technological challenges as well as economic issues, recent research trends have been analyzed and found the direction for the future research in terms of material, supplementary function, and patterning.